diff mbox

[v3,1/8] hw/mips_cmgcr: allow GCR base to be moved

Message ID 1486571506-16242-1-git-send-email-yongbok.kim@imgtec.com
State New
Headers show

Commit Message

Yongbok Kim Feb. 8, 2017, 4:31 p.m. UTC 
From: Paul Burton <paul.burton@imgtec.com>

Support moving the GCR base address & updating the CPU's CP0 CMGCRBase
register appropriately. This is required if a platform needs to move its
GCRs away from other memory, as the MIPS Boston development board does
to avoid its flash memory.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Reviewed-by: Leon Alrae <leon.alrae@imgtec.com>
Signed-off-by: Yongbok Kim <yongbok.kim@imgtec.com>
---
 hw/misc/mips_cmgcr.c         | 17 +++++++++++++++++
 include/hw/misc/mips_cmgcr.h |  3 +++
 2 files changed, 20 insertions(+)

Comments

Eric Blake Feb. 8, 2017, 9:44 p.m. UTC | #1 
On 02/08/2017 10:31 AM, Yongbok Kim wrote:
> From: Paul Burton <paul.burton@imgtec.com>

The 0/8 cover letter was sent with this header:
Message-ID: <1486571463-16183-1-git-send-email-yongbok.kim@imgtec.com>

but your individual patches were sent with no In-Reply-To: or
References: headers; therefore, each message appears as its own
top-level thread. When reposting, please make sure your series is
properly threaded.

> 
> Support moving the GCR base address & updating the CPU's CP0 CMGCRBase
> register appropriately. This is required if a platform needs to move its
> GCRs away from other memory, as the MIPS Boston development board does
> to avoid its flash memory.
>
diff mbox

Patch

diff --git a/hw/misc/mips_cmgcr.c b/hw/misc/mips_cmgcr.c
index b3ba166..a1edb53 100644
--- a/hw/misc/mips_cmgcr.c
+++ b/hw/misc/mips_cmgcr.c
@@ -29,6 +29,20 @@  static inline bool is_gic_connected(MIPSGCRState *s)
     return s->gic_mr != NULL;
 }
 
+static inline void update_gcr_base(MIPSGCRState *gcr, uint64_t val)
+{
+    CPUState *cpu;
+    MIPSCPU *mips_cpu;
+
+    gcr->gcr_base = val & GCR_BASE_GCRBASE_MSK;
+    memory_region_set_address(&gcr->iomem, gcr->gcr_base);
+
+    CPU_FOREACH(cpu) {
+        mips_cpu = MIPS_CPU(cpu);
+        mips_cpu->env.CP0_CMGCRBase = gcr->gcr_base >> 4;
+    }
+}
+
 static inline void update_cpc_base(MIPSGCRState *gcr, uint64_t val)
 {
     if (is_cpc_connected(gcr)) {
@@ -117,6 +131,9 @@  static void gcr_write(void *opaque, hwaddr addr, uint64_t data, unsigned size)
     MIPSGCRVPState *other_vps = &gcr->vps[current_vps->other];
 
     switch (addr) {
+    case GCR_BASE_OFS:
+        update_gcr_base(gcr, data);
+        break;
     case GCR_GIC_BASE_OFS:
         update_gic_base(gcr, data);
         break;
diff --git a/include/hw/misc/mips_cmgcr.h b/include/hw/misc/mips_cmgcr.h
index a209d91..c9dfcb4 100644
--- a/include/hw/misc/mips_cmgcr.h
+++ b/include/hw/misc/mips_cmgcr.h
@@ -41,6 +41,9 @@ 
 #define GCR_L2_CONFIG_BYPASS_SHF    20
 #define GCR_L2_CONFIG_BYPASS_MSK    ((0x1ULL) << GCR_L2_CONFIG_BYPASS_SHF)
 
+/* GCR_BASE register fields */
+#define GCR_BASE_GCRBASE_MSK     0xffffffff8000ULL
+
 /* GCR_GIC_BASE register fields */
 #define GCR_GIC_BASE_GICEN_MSK   1
 #define GCR_GIC_BASE_GICBASE_MSK 0xFFFFFFFE0000ULL