@@ -1302,17 +1302,18 @@ static const struct net_device_ops tulip_netdev_ops = {
#endif
};
+DEFINE_PCI_DEVICE_TABLE(early_486_chipsets) = {
+ { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82424) },
+ { PCI_DEVICE(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_496) },
+ { },
+};
+
static int __devinit tulip_init_one (struct pci_dev *pdev,
const struct pci_device_id *ent)
{
struct tulip_private *tp;
/* See note below on the multiport cards. */
static unsigned char last_phys_addr[6] = {0x00, 'L', 'i', 'n', 'u', 'x'};
- static struct pci_device_id early_486_chipsets[] = {
- { PCI_DEVICE(PCI_VENDOR_ID_INTEL, PCI_DEVICE_ID_INTEL_82424) },
- { PCI_DEVICE(PCI_VENDOR_ID_SI, PCI_DEVICE_ID_SI_496) },
- { },
- };
static int last_irq;
static int multiport_cnt; /* For four-port boards w/one EEPROM */
int i, irq;
@@ -1682,7 +1683,9 @@ static int __devinit tulip_init_one (struct pci_dev *pdev,
tp->full_duplex_lock = 1;
if (tulip_media_cap[tp->default_port] & MediaIsMII) {
- u16 media2advert[] = { 0x20, 0x40, 0x03e0, 0x60, 0x80, 0x100, 0x200 };
+ static const u16 media2advert[] = {
+ 0x20, 0x40, 0x03e0, 0x60, 0x80, 0x100, 0x200
+ };
tp->mii_advertise = media2advert[tp->default_port - 9];
tp->mii_advertise |= (tp->flags & HAS_8023X); /* Matching bits! */
}
Using static const generally increases object text and decreases data size. It also generally decreases overall object size. text data bss dec hex filename 26150 657 5416 32223 7ddf drivers/net/tulip/tulip_core.o.new 26054 741 5416 32211 7dd3 drivers/net/tulip/tulip_core.o.old Use DEFINE_PCI_DEVICE_TABLE for local declaration. Signed-off-by: Joe Perches <joe@perches.com> --- drivers/net/tulip/tulip_core.c | 15 +++++++++------ 1 files changed, 9 insertions(+), 6 deletions(-)