@@ -63,15 +63,15 @@ ath5k_ani_set_noise_immunity_level(struct ath5k_hw *ah, int level)
* so i stick with the HAL version for now...
*/
#if 0
- const s8 hi[] = { -18, -18, -16, -14, -12 };
- const s8 lo[] = { -52, -56, -60, -64, -70 };
- const s8 sz[] = { -34, -41, -48, -55, -62 };
- const s8 fr[] = { -70, -72, -75, -78, -80 };
+ static const s8 hi[] = { -18, -18, -16, -14, -12 };
+ static const s8 lo[] = { -52, -56, -60, -64, -70 };
+ static const s8 sz[] = { -34, -41, -48, -55, -62 };
+ static const s8 fr[] = { -70, -72, -75, -78, -80 };
#else
- const s8 sz[] = { -55, -62 };
- const s8 lo[] = { -64, -70 };
- const s8 hi[] = { -14, -12 };
- const s8 fr[] = { -78, -80 };
+ static const s8 sz[] = { -55, -62 };
+ static const s8 lo[] = { -64, -70 };
+ static const s8 hi[] = { -14, -12 };
+ static const s8 fr[] = { -78, -80 };
#endif
if (level < 0 || level >= ARRAY_SIZE(sz)) {
ATH5K_ERR(ah->ah_sc, "noise immuniy level %d out of range",
@@ -102,7 +102,7 @@ ath5k_ani_set_noise_immunity_level(struct ath5k_hw *ah, int level)
void
ath5k_ani_set_spur_immunity_level(struct ath5k_hw *ah, int level)
{
- const int val[] = { 2, 4, 6, 8, 10, 12, 14, 16 };
+ static const int val[] = { 2, 4, 6, 8, 10, 12, 14, 16 };
if (level < 0 || level >= ARRAY_SIZE(val) ||
level > ah->ah_sc->ani_state.max_spur_level) {
@@ -127,7 +127,7 @@ ath5k_ani_set_spur_immunity_level(struct ath5k_hw *ah, int level)
void
ath5k_ani_set_firstep_level(struct ath5k_hw *ah, int level)
{
- const int val[] = { 0, 4, 8 };
+ static const int val[] = { 0, 4, 8 };
if (level < 0 || level >= ARRAY_SIZE(val)) {
ATH5K_ERR(ah->ah_sc, "firstep level %d out of range", level);
@@ -151,12 +151,12 @@ ath5k_ani_set_firstep_level(struct ath5k_hw *ah, int level)
void
ath5k_ani_set_ofdm_weak_signal_detection(struct ath5k_hw *ah, bool on)
{
- const int m1l[] = { 127, 50 };
- const int m2l[] = { 127, 40 };
- const int m1[] = { 127, 0x4d };
- const int m2[] = { 127, 0x40 };
- const int m2cnt[] = { 31, 16 };
- const int m2lcnt[] = { 63, 48 };
+ static const int m1l[] = { 127, 50 };
+ static const int m2l[] = { 127, 40 };
+ static const int m1[] = { 127, 0x4d };
+ static const int m2[] = { 127, 0x40 };
+ static const int m2cnt[] = { 31, 16 };
+ static const int m2lcnt[] = { 63, 48 };
AR5K_REG_WRITE_BITS(ah, AR5K_PHY_WEAK_OFDM_LOW_THR,
AR5K_PHY_WEAK_OFDM_LOW_THR_M1, m1l[on]);
@@ -192,7 +192,7 @@ ath5k_ani_set_ofdm_weak_signal_detection(struct ath5k_hw *ah, bool on)
void
ath5k_ani_set_cck_weak_signal_detection(struct ath5k_hw *ah, bool on)
{
- const int val[] = { 8, 6 };
+ static const int val[] = { 8, 6 };
AR5K_REG_WRITE_BITS(ah, AR5K_PHY_CCK_CROSSCORR,
AR5K_PHY_CCK_CROSSCORR_WEAK_SIG_THR, val[on]);
ah->ah_sc->ani_state.cck_weak_sig = on;
Using static const generally increases object text and decreases data size. It also generally decreases overall object size. text data bss dec hex filename 11266 56 2464 13786 35da drivers/net/wireless/ath/ath5k/ani.o.old 11181 56 2464 13701 3585 drivers/net/wireless/ath/ath5k/ani.o.new Signed-off-by: Joe Perches <joe@perches.com> --- drivers/net/wireless/ath/ath5k/ani.c | 34 +++++++++++++++++----------------- 1 files changed, 17 insertions(+), 17 deletions(-)