@@ -764,41 +764,37 @@ static int vnet_event_napi(struct vnet_port *port, int budget)
struct vio_driver_state *vio = &port->vio;
int tx_wakeup, err;
int npkts = 0;
- int event = (port->rx_event & LDC_EVENT_RESET);
-
-ldc_ctrl:
- if (unlikely(event == LDC_EVENT_RESET ||
- event == LDC_EVENT_UP)) {
- vio_link_state_change(vio, event);
-
- if (event == LDC_EVENT_RESET) {
- vnet_port_reset(port);
- vio_port_up(vio);
-
- /* If the device is running but its tx queue was
- * stopped (due to flow control), restart it.
- * This is necessary since vnet_port_reset()
- * clears the tx drings and thus we may never get
- * back a VIO_TYPE_DATA ACK packet - which is
- * the normal mechanism to restart the tx queue.
- */
- if (netif_running(dev))
- maybe_tx_wakeup(port);
- }
+
+ /* we don't expect any other bits */
+ BUG_ON(port->rx_event & ~(LDC_EVENT_DATA_READY |
+ LDC_EVENT_RESET |
+ LDC_EVENT_UP));
+
+ /* RESET takes precedent over any other event */
+ if (port->rx_event & LDC_EVENT_RESET) {
+ vio_link_state_change(vio, LDC_EVENT_RESET);
+ vnet_port_reset(port);
+ vio_port_up(vio);
+
+ /* If the device is running but its tx queue was
+ * stopped (due to flow control), restart it.
+ * This is necessary since vnet_port_reset()
+ * clears the tx drings and thus we may never get
+ * back a VIO_TYPE_DATA ACK packet - which is
+ * the normal mechanism to restart the tx queue.
+ */
+ if (netif_running(dev))
+ maybe_tx_wakeup(port);
+
port->rx_event = 0;
return 0;
}
- /* We may have multiple LDC events in rx_event. Unroll send_events() */
- event = (port->rx_event & LDC_EVENT_UP);
- port->rx_event &= ~(LDC_EVENT_RESET | LDC_EVENT_UP);
- if (event == LDC_EVENT_UP)
- goto ldc_ctrl;
- event = port->rx_event;
- if (!(event & LDC_EVENT_DATA_READY))
- return 0;
- /* we dont expect any other bits than RESET, UP, DATA_READY */
- BUG_ON(event != LDC_EVENT_DATA_READY);
+ if (port->rx_event & LDC_EVENT_UP) {
+ vio_link_state_change(vio, LDC_EVENT_UP);
+ port->rx_event = 0;
+ return 0;
+ }
err = 0;
tx_wakeup = 0;
@@ -821,25 +817,25 @@ ldc_ctrl:
pkt->start_idx = vio_dring_next(dr,
port->napi_stop_idx);
pkt->end_idx = -1;
- goto napi_resume;
- }
- err = ldc_read(vio->lp, &msgbuf, sizeof(msgbuf));
- if (unlikely(err < 0)) {
- if (err == -ECONNRESET)
- vio_conn_reset(vio);
- break;
+ } else {
+ err = ldc_read(vio->lp, &msgbuf, sizeof(msgbuf));
+ if (unlikely(err < 0)) {
+ if (err == -ECONNRESET)
+ vio_conn_reset(vio);
+ break;
+ }
+ if (err == 0)
+ break;
+ viodbg(DATA, "TAG [%02x:%02x:%04x:%08x]\n",
+ msgbuf.tag.type,
+ msgbuf.tag.stype,
+ msgbuf.tag.stype_env,
+ msgbuf.tag.sid);
+ err = vio_validate_sid(vio, &msgbuf.tag);
+ if (err < 0)
+ break;
}
- if (err == 0)
- break;
- viodbg(DATA, "TAG [%02x:%02x:%04x:%08x]\n",
- msgbuf.tag.type,
- msgbuf.tag.stype,
- msgbuf.tag.stype_env,
- msgbuf.tag.sid);
- err = vio_validate_sid(vio, &msgbuf.tag);
- if (err < 0)
- break;
-napi_resume:
+
if (likely(msgbuf.tag.type == VIO_TYPE_DATA)) {
if (msgbuf.tag.stype == VIO_SUBTYPE_INFO) {
if (!sunvnet_port_is_up_common(port)) {
The use of gotos for handling the incoming events made this code harder to read and support than it should be. This patch straightens out and clears up the logic. Signed-off-by: Shannon Nelson <shannon.nelson@oracle.com> --- drivers/net/ethernet/sun/sunvnet_common.c | 94 ++++++++++++++--------------- 1 files changed, 45 insertions(+), 49 deletions(-)