diff mbox

[U-Boot,14/16] ARM: uniphier: make update commands more flexible for ATF

Message ID 1485554036-29320-15-git-send-email-yamada.masahiro@socionext.com
State Accepted
Commit b7b4303642af1cf3a2c58befaa8e8944b9fbb3c9
Delegated to: Masahiro Yamada
Headers show

Commit Message

Masahiro Yamada Jan. 27, 2017, 9:53 p.m. UTC 
Currently, SPL (u-boot-spl.bin) and U-Boot (u-boot.bin) are stored
in non-volatile devices, and some environments are defined to update
the images easily.

When ARM Trusted Firmware is fully used, SPL is not used.  U-Boot
proper is contained as BL33 into FIP (Firmware Image Package), which
is standard container used by ATF.  Allow to use it.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
---

 include/configs/uniphier.h | 24 ++++++++++++++++++------
 1 file changed, 18 insertions(+), 6 deletions(-)
diff mbox

Patch

diff --git a/include/configs/uniphier.h b/include/configs/uniphier.h
index a8a1849..da7639f 100644
--- a/include/configs/uniphier.h
+++ b/include/configs/uniphier.h
@@ -147,6 +147,17 @@ 
 
 #define CONFIG_CMDLINE_EDITING		/* add command line history	*/
 
+#if defined(CONFIG_ARM64) && !defined(CONFIG_ARMV8_MULTIENTRY)
+/* ARM Trusted Firmware */
+#define BOOT_IMAGES \
+	"second_image=bl1.bin\0" \
+	"third_image=fip.bin\0"
+#else
+#define BOOT_IMAGES \
+	"second_image=u-boot-spl.bin\0" \
+	"third_image=u-boot.bin\0"
+#endif
+
 #define CONFIG_BOOTCOMMAND		"run $bootmode"
 
 #define CONFIG_ROOTPATH			"/nfs/root/path"
@@ -230,20 +241,21 @@ 
 	"initrd_high=0xffffffffffffffff\0"			\
 	"nor_base=0x42000000\0"					\
 	"sramupdate=setexpr tmp_addr $nor_base + 0x50000 &&"	\
-		"tftpboot $tmp_addr u-boot-spl.bin &&"		\
+		"tftpboot $tmp_addr $second_image && " \
 		"setexpr tmp_addr $nor_base + 0x70000 && " \
-		"tftpboot $tmp_addr u-boot.bin\0"		\
+		"tftpboot $tmp_addr $third_image\0" \
 	"emmcupdate=mmcsetn &&"					\
 		"mmc partconf $mmc_first_dev 0 1 1 &&"		\
-		"tftpboot u-boot-spl.bin &&"			\
+		"tftpboot $second_image && " \
 		"mmc write $loadaddr 0 100 && " \
-		"tftpboot u-boot.bin &&"			\
+		"tftpboot $third_image && " \
 		"mmc write $loadaddr 100 700\0" \
 	"nandupdate=nand erase 0 0x00100000 &&"			\
-		"tftpboot u-boot-spl.bin &&"			\
+		"tftpboot $second_image && " \
 		"nand write $loadaddr 0 0x00020000 && " \
-		"tftpboot u-boot.bin &&"			\
+		"tftpboot $third_image && " \
 		"nand write $loadaddr 0x00020000 0x000e0000\0" \
+	BOOT_IMAGES \
 	LINUXBOOT_ENV_SETTINGS
 
 #define CONFIG_SYS_BOOTMAPSZ			0x20000000