Patchwork [U-Boot,v4,1/1] imx: Get fec mac address from fuse

login
register
mail settings
Submitter Liu Hui-R64343
Date Nov. 18, 2010, 5:44 a.m.
Message ID <1290059063-20899-1-git-send-email-r64343@freescale.com>
Download mbox | patch
Permalink /patch/72053/
State Superseded
Headers show

Comments

Liu Hui-R64343 - Nov. 18, 2010, 5:44 a.m.
The patch is to support getting FEC MAC address from fuse bank.

Signed-off-by: Jason Liu <r64343@freescale.com>

---
Changes for v2:
 - correct the mac address byte order according to review comments
 - add memset(edev, 0. sizeof(*edev)) when do fec_probe,
 - fix some code comments
Changes for v3:
 - rebase
 - address the comments of Stefano, make the imx_get_mac_from_fuse(),
   declared independently inside each imx-regs.h to make it specific
   for each processor, because it accesses to different structures.
 - address the comments of Wolfgang and Stefano, use struct to access
   mac_addr fuse.
Changes for v4:
 - Address the comments of Wolfgang, use fuse_regs instead of bank addres
   and change from fuse1_6 to fuse0_5 naming convention and use fuse_bank0_regs
   instead of fuse_bank0 to kill misleading.
---
 arch/arm/cpu/arm926ejs/mx25/generic.c     |   12 ++++++++++
 arch/arm/cpu/arm926ejs/mx27/generic.c     |   12 ++++++++++
 arch/arm/cpu/armv7/mx5/soc.c              |   14 ++++++++++++
 arch/arm/include/asm/arch-mx25/imx-regs.h |   19 +++++++++------
 arch/arm/include/asm/arch-mx27/imx-regs.h |   18 ++++++++++-----
 arch/arm/include/asm/arch-mx5/imx-regs.h  |   34 +++++++++++++++++++++++++++++
 drivers/net/fec_mxc.c                     |   15 +------------
 7 files changed, 96 insertions(+), 28 deletions(-)
Wolfgang Denk - Nov. 18, 2010, 6:34 a.m.
Dear Jason Liu,

In message <1290059063-20899-1-git-send-email-r64343@freescale.com> you wrote:
> The patch is to support getting FEC MAC address from fuse bank.
> 
> Signed-off-by: Jason Liu <r64343@freescale.com>
...
> +struct fuse_bank1_regs {
> +	u32	fuse0_8[9];
> +	u32 	mac_addr[6];
> +	u32 	fuse5_31[0x11];

This looks wrong to me. It's 0...8, 9...14, 15...31 o the last field's
name should be fuse15_31 ?

Best regards,

Wolfgang Denk
Jason Liu - Nov. 18, 2010, 6:45 a.m.
2010/11/18 Wolfgang Denk <wd@denx.de>:
> Dear Jason Liu,
>
> In message <1290059063-20899-1-git-send-email-r64343@freescale.com> you wrote:
>> The patch is to support getting FEC MAC address from fuse bank.
>>
>> Signed-off-by: Jason Liu <r64343@freescale.com>
> ...
>> +struct fuse_bank1_regs {
>> +     u32     fuse0_8[9];
>> +     u32     mac_addr[6];
>> +     u32     fuse5_31[0x11];
>
> This looks wrong to me. It's 0...8, 9...14, 15...31 o the last field's
> name should be fuse15_31 ?

Sorry, typo error, it should be fuse15_31[0x11];
Thanks for your good review.

>
> Best regards,
>
> Wolfgang Denk
>
> --
> DENX Software Engineering GmbH,     MD: Wolfgang Denk & Detlev Zundel
> HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
> Phone: (+49)-8142-66989-10 Fax: (+49)-8142-66989-80 Email: wd@denx.de
> Nearly everyone is in favor of going  to  heaven  but  too  many  are
> hoping  they'll  live  long  enough  to see an easing of the entrance
> requirements. Never appeal to a man's "better nature." he  might  not
> have one.
> _______________________________________________
> U-Boot mailing list
> U-Boot@lists.denx.de
> http://lists.denx.de/mailman/listinfo/u-boot
>

Patch

diff --git a/arch/arm/cpu/arm926ejs/mx25/generic.c b/arch/arm/cpu/arm926ejs/mx25/generic.c
index b80a389..4ac7bbb 100644
--- a/arch/arm/cpu/arm926ejs/mx25/generic.c
+++ b/arch/arm/cpu/arm926ejs/mx25/generic.c
@@ -260,4 +260,16 @@  void mx25_fec_init_pins (void)
 	writel (outpadctl, &padctl->pad_fec_tdata1);
 
 }
+
+void imx_get_mac_from_fuse(unsigned char *mac)
+{
+	int i;
+	struct iim_regs *iim = (struct iim_regs *)IMX_IIM_BASE;
+	struct fuse_bank *bank = &iim->bank[0];
+	struct fuse_bank0_regs *fuse =
+			(struct fuse_bank0_regs *)bank->fuse_regs;
+
+	for (i = 0; i < 6; i++)
+		mac[i] = readl(&fuse->mac_addr[i]);
+}
 #endif /* CONFIG_FEC_MXC */
diff --git a/arch/arm/cpu/arm926ejs/mx27/generic.c b/arch/arm/cpu/arm926ejs/mx27/generic.c
index ae2ce58..ceaac48 100644
--- a/arch/arm/cpu/arm926ejs/mx27/generic.c
+++ b/arch/arm/cpu/arm926ejs/mx27/generic.c
@@ -313,6 +313,18 @@  void mx27_fec_init_pins(void)
 	for (i = 0; i < ARRAY_SIZE(mode); i++)
 		imx_gpio_mode(mode[i]);
 }
+
+void imx_get_mac_from_fuse(unsigned char *mac)
+{
+	int i;
+	struct iim_regs *iim = (struct iim_regs *)IMX_IIM_BASE;
+	struct fuse_bank *bank = &iim->bank[0];
+	struct fuse_bank0_regs *fuse =
+			(struct fuse_bank0_regs *)bank->fuse_regs;
+
+	for (i = 0; i < 6; i++)
+		mac[6-1-i] = readl(&fuse->mac_addr[i]);
+}
 #endif /* CONFIG_FEC_MXC */
 
 #ifdef CONFIG_MXC_MMC
diff --git a/arch/arm/cpu/armv7/mx5/soc.c b/arch/arm/cpu/armv7/mx5/soc.c
index 7c7a565..c22d6dc 100644
--- a/arch/arm/cpu/armv7/mx5/soc.c
+++ b/arch/arm/cpu/armv7/mx5/soc.c
@@ -100,6 +100,20 @@  int cpu_eth_init(bd_t *bis)
 	return rc;
 }
 
+#if defined(CONFIG_FEC_MXC)
+void imx_get_mac_from_fuse(unsigned char *mac)
+{
+	int i;
+	struct iim_regs *iim = (struct iim_regs *)IMX_IIM_BASE;
+	struct fuse_bank *bank = &iim->bank[1];
+	struct fuse_bank1_regs *fuse =
+			(struct fuse_bank1_regs *)bank->fuse_regs;
+
+	for (i = 0; i < 6; i++)
+		mac[i] = readl(&fuse->mac_addr[i]);
+}
+#endif
+
 /*
  * Initializes on-chip MMC controllers.
  * to override, implement board_mmc_init()
diff --git a/arch/arm/include/asm/arch-mx25/imx-regs.h b/arch/arm/include/asm/arch-mx25/imx-regs.h
index f5a2929..55ad115 100644
--- a/arch/arm/include/asm/arch-mx25/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx25/imx-regs.h
@@ -36,6 +36,7 @@ 
 #ifndef __ASSEMBLY__
 #ifdef CONFIG_FEC_MXC
 extern void mx25_fec_init_pins(void);
+extern void imx_get_mac_from_fuse(unsigned char *mac);
 #endif
 
 /* Clock Control Module (CCM) registers */
@@ -129,12 +130,17 @@  struct iim_regs {
 	u32 iim_srev;
 	u32 iim_prog_p;
 	u32 res1[0x1f5];
-	u32 iim_bank_area0[0x20];
-	u32 res2[0xe0];
-	u32 iim_bank_area1[0x20];
-	u32 res3[0xe0];
-	u32 iim_bank_area2[0x20];
+	struct fuse_bank {
+		u32 fuse_regs[0x20];
+		u32 fuse_rsvd[0xe0];
+	} bank[3];
 };
+
+struct fuse_bank0_regs {
+	u32 fuse0_25[0x1a];
+	u32 mac_addr[6];
+};
+
 #endif
 
 /* AIPS 1 */
@@ -312,7 +318,4 @@  struct iim_regs {
 #define WSR_UNLOCK1		0x5555
 #define WSR_UNLOCK2		0xAAAA
 
-/* FUSE bank offsets */
-#define IIM0_MAC		0x1a
-
 #endif				/* _IMX_REGS_H */
diff --git a/arch/arm/include/asm/arch-mx27/imx-regs.h b/arch/arm/include/asm/arch-mx27/imx-regs.h
index 6ecddaa..3095839 100644
--- a/arch/arm/include/asm/arch-mx27/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx27/imx-regs.h
@@ -34,6 +34,7 @@  extern void mx27_uart_init_pins(void);
 
 #ifdef CONFIG_FEC_MXC
 extern void mx27_fec_init_pins(void);
+extern void imx_get_mac_from_fuse(unsigned char *mac);
 #endif /* CONFIG_FEC_MXC */
 
 #ifdef CONFIG_MXC_MMC
@@ -203,8 +204,18 @@  struct iim_regs {
 	u32 iim_scs2;
 	u32 iim_scs3;
 	u32 res[0x1F0];
-	u32 iim_bank_area0[0x100];
+	struct fuse_bank {
+		u32 fuse_regs[0x20];
+		u32 fuse_rsvd[0xe0];
+	} bank[1];
 };
+
+struct fuse_bank0_regs {
+	u32 fuse0_3[4];
+	u32 mac_addr[6];
+	u32 fuse10_31[0x16];
+};
+
 #endif
 
 #define IMX_IO_BASE		0x10000000
@@ -512,9 +523,4 @@  struct iim_regs {
 #define IIM_ERR_SNSE	(1 << 2)
 #define IIM_ERR_PARITYE	(1 << 1)
 
-/* Definitions for i.MX27 TO2 */
-#define IIM0_MAC		5
-#define IIM0_SCC_KEY		11
-#define IIM1_SUID		1
-
 #endif				/* _IMX_REGS_H */
diff --git a/arch/arm/include/asm/arch-mx5/imx-regs.h b/arch/arm/include/asm/arch-mx5/imx-regs.h
index 0b6249a..934a20e 100644
--- a/arch/arm/include/asm/arch-mx5/imx-regs.h
+++ b/arch/arm/include/asm/arch-mx5/imx-regs.h
@@ -205,9 +205,13 @@ 
 #define BOARD_REV_1_0           0x0
 #define BOARD_REV_2_0           0x1
 
+#define IMX_IIM_BASE            (IIM_BASE_ADDR)
+
 #if !(defined(__KERNEL_STRICT_NAMES) || defined(__ASSEMBLY__))
 #include <asm/types.h>
 
+extern void imx_get_mac_from_fuse(unsigned char *mac);
+
 #define __REG(x)	(*((volatile u32 *)(x)))
 #define __REG16(x)	(*((volatile u16 *)(x)))
 #define __REG8(x)	(*((volatile u8 *)(x)))
@@ -275,6 +279,36 @@  struct src {
 	u32	sisr;
 	u32	simr;
 };
+
+struct iim_regs {
+	u32 	stat;
+	u32 	statm;
+	u32 	err;
+	u32 	emask;
+	u32 	fctl;
+	u32 	ua;
+	u32 	la;
+	u32 	sdat;
+	u32 	prev;
+	u32 	srev;
+	u32 	preg_p;
+	u32 	scs0;
+	u32 	scs1;
+	u32 	scs2;
+	u32 	scs3;
+	u32 	res0[0x1f1];
+	struct fuse_bank {
+		u32 	fuse_regs[0x20];
+		u32 	fuse_rsvd[0xe0];
+	} bank[4];
+};
+
+struct fuse_bank1_regs {
+	u32	fuse0_8[9];
+	u32 	mac_addr[6];
+	u32 	fuse5_31[0x11];
+};
+
 #endif /* __ASSEMBLER__*/
 
 #endif				/*  __ASM_ARCH_MXC_MX51_H__ */
diff --git a/drivers/net/fec_mxc.c b/drivers/net/fec_mxc.c
index c17f937..0013ab4 100644
--- a/drivers/net/fec_mxc.c
+++ b/drivers/net/fec_mxc.c
@@ -312,21 +312,8 @@  static void fec_rbd_clean(int last, struct fec_bd *pRbd)
 
 static int fec_get_hwaddr(struct eth_device *dev, unsigned char *mac)
 {
-/*
- * The MX27 can store the mac address in internal eeprom
- * This mechanism is not supported now by MX51 or MX25
- */
-#if defined(CONFIG_MX51) || defined(CONFIG_MX25)
-	return -1;
-#else
-	struct iim_regs *iim = (struct iim_regs *)IMX_IIM_BASE;
-	int i;
-
-	for (i = 0; i < 6; i++)
-		mac[6-1-i] = readl(&iim->iim_bank_area0[IIM0_MAC + i]);
-
+	imx_get_mac_from_fuse(mac);
 	return !is_valid_ether_addr(mac);
-#endif
 }
 
 static int fec_set_hwaddr(struct eth_device *dev)