@@ -222,6 +222,18 @@ int mv88e6xxx_write(struct mv88e6xxx_chip *chip, int addr, int reg, u16 val)
return 0;
}
+static int mv88e6165_phy_read(struct mv88e6xxx_chip *chip, int addr,
+ int reg, u16 *val)
+{
+ return mv88e6xxx_read(chip, addr, reg, val);
+}
+
+static int mv88e6165_phy_write(struct mv88e6xxx_chip *chip, int addr,
+ int reg, u16 val)
+{
+ return mv88e6xxx_write(chip, addr, reg, val);
+}
+
static int mv88e6xxx_phy_read(struct mv88e6xxx_chip *chip, int phy,
int reg, u16 *val)
{
@@ -3085,8 +3097,8 @@ static const struct mv88e6xxx_ops mv88e6097_ops = {
static const struct mv88e6xxx_ops mv88e6123_ops = {
/* MV88E6XXX_FAMILY_6165 */
.set_switch_mac = mv88e6xxx_g2_set_switch_mac,
- .phy_read = mv88e6xxx_read,
- .phy_write = mv88e6xxx_write,
+ .phy_read = mv88e6165_phy_read,
+ .phy_write = mv88e6165_phy_write,
.port_set_link = mv88e6xxx_port_set_link,
.port_set_duplex = mv88e6xxx_port_set_duplex,
.port_set_speed = mv88e6185_port_set_speed,
@@ -3132,8 +3144,8 @@ static const struct mv88e6xxx_ops mv88e6131_ops = {
static const struct mv88e6xxx_ops mv88e6161_ops = {
/* MV88E6XXX_FAMILY_6165 */
.set_switch_mac = mv88e6xxx_g2_set_switch_mac,
- .phy_read = mv88e6xxx_read,
- .phy_write = mv88e6xxx_write,
+ .phy_read = mv88e6165_phy_read,
+ .phy_write = mv88e6165_phy_write,
.port_set_link = mv88e6xxx_port_set_link,
.port_set_duplex = mv88e6xxx_port_set_duplex,
.port_set_speed = mv88e6185_port_set_speed,
@@ -3157,8 +3169,8 @@ static const struct mv88e6xxx_ops mv88e6161_ops = {
static const struct mv88e6xxx_ops mv88e6165_ops = {
/* MV88E6XXX_FAMILY_6165 */
.set_switch_mac = mv88e6xxx_g2_set_switch_mac,
- .phy_read = mv88e6xxx_read,
- .phy_write = mv88e6xxx_write,
+ .phy_read = mv88e6165_phy_read,
+ .phy_write = mv88e6165_phy_write,
.port_set_link = mv88e6xxx_port_set_link,
.port_set_duplex = mv88e6xxx_port_set_duplex,
.port_set_speed = mv88e6185_port_set_speed,
The mv88e6165 family has the internal PHYs mapped directly onto the SMI register space as the switch. So the registers can be read directly. Put a wrapper around this, in preparation for changing the signature in order to support the external MDIO bus of the 6390. Signed-off-by: Andrew Lunn <andrew@lunn.ch> --- drivers/net/dsa/mv88e6xxx/chip.c | 24 ++++++++++++++++++------ 1 file changed, 18 insertions(+), 6 deletions(-)