Message ID | 20170124130306.5499-1-colin.king@canonical.com |
---|---|
State | Accepted |
Headers | show |
On 2017-01-24 09:03 PM, Colin King wrote: > From: Colin Ian King <colin.king@canonical.com> > > Signed-off-by: Colin Ian King <colin.king@canonical.com> > --- > doc/fwts.1 | 20 ++++++++++---------- > 1 file changed, 10 insertions(+), 10 deletions(-) > > diff --git a/doc/fwts.1 b/doc/fwts.1 > index e05c111..3c97480 100644 > --- a/doc/fwts.1 > +++ b/doc/fwts.1 > @@ -28,7 +28,7 @@ fwts \- a firmware test suite to identify firmware bugs. > .SH DESCRIPTION > This manual page documents briefly the > .B fwts > -firmware test suite. > +firmware test suite. > The tool > .B fwts > is comprised of over fifty tests that are designed to examine and test > @@ -81,7 +81,7 @@ run all the tests. > .TP > .B \-\-arch=name > specify the target architecture whose firmware is being tested. This allows > -fwts to run on one architecture (the host) but perform tests for a different > +fwts to run on one architecture (the host) but perform tests for a different > architecture (the target). Known architecture strings are: x86, x86_32, or > x86_64 for Intel; ia64 for Itanium; arm64 or aarch64 for ARMv8. Unless this > option is specified, the target is assumed to be the same as the host. > @@ -308,18 +308,18 @@ wakeup timer will fire during the hibernate state. The default is currently 90 s > .TP > .B \-p, \-\-show\-progress > show the progress of the tests being run. Each test will identified as it is being > -run. For long tests, a percentage of completion time will be displayed. As of fwts > +run. For long tests, a percentage of completion time will be displayed. As of fwts > 0.19.06 this is enabled by default and can be disabled with \-\-quiet (or \-q). > .TP > .B \-q, \-\-quiet > run quietly with no output to stdout. > .TP > -.B \-D, \-\-show\-progress\-dialog > +.B \-D, \-\-show\-progress\-dialog > output the progress of tests being run in a form that can be piped into the > dialog tool with the \-\-gauge option. > .TP > .B \-s, \-\-show\-tests > -show the names of available tests. By default will show all tests. Use the \-\-batch, \-\-interactive, \-\-batch\-experimental, \-\-interactive\-experimental, \-\-utils > +show the names of available tests. By default will show all tests. Use the \-\-batch, \-\-interactive, \-\-batch\-experimental, \-\-interactive\-experimental, \-\-utils > options to show these specific tests. > .TP > .B \-\-show\-tests\-full > @@ -346,7 +346,7 @@ Int 15 E820 memory map, firmware ROM data. > .B \-v, \-\-version > output version number and build date of the > .B > -fwts > +fwts > tool. > .TP > .B \-w, \-\-width=N > @@ -405,11 +405,11 @@ Run multiple S3 tests with delay between each test ranging from 1 second to 10 s > sudo fwts s3 \-\-s3\-multiple=100 \-\-s3\-min\-delay=1 \-\-s3\-max\-delay=10 \-\-s3\-delay\-delta=0.2 > > .SH SEE ALSO > -.BR iasl (1), > -.BR acpixtract (1), > -.BR acpidump (1), > +.BR iasl (1), > +.BR acpixtract (1), > +.BR acpidump (1), > .BR dtc (1), > -.BR dmidecode (8), > +.BR dmidecode (8), > .BR lspci (8) > .SH AUTHOR > fwts was originally written by Colin King with much of the original test > Acked-by: Alex Hung <alex.hung@canonical.com>
On 2017年01月24日 21:03, Colin King wrote: > From: Colin Ian King <colin.king@canonical.com> > > Signed-off-by: Colin Ian King <colin.king@canonical.com> > --- > doc/fwts.1 | 20 ++++++++++---------- > 1 file changed, 10 insertions(+), 10 deletions(-) > > diff --git a/doc/fwts.1 b/doc/fwts.1 > index e05c111..3c97480 100644 > --- a/doc/fwts.1 > +++ b/doc/fwts.1 > @@ -28,7 +28,7 @@ fwts \- a firmware test suite to identify firmware bugs. > .SH DESCRIPTION > This manual page documents briefly the > .B fwts > -firmware test suite. > +firmware test suite. > The tool > .B fwts > is comprised of over fifty tests that are designed to examine and test > @@ -81,7 +81,7 @@ run all the tests. > .TP > .B \-\-arch=name > specify the target architecture whose firmware is being tested. This allows > -fwts to run on one architecture (the host) but perform tests for a different > +fwts to run on one architecture (the host) but perform tests for a different > architecture (the target). Known architecture strings are: x86, x86_32, or > x86_64 for Intel; ia64 for Itanium; arm64 or aarch64 for ARMv8. Unless this > option is specified, the target is assumed to be the same as the host. > @@ -308,18 +308,18 @@ wakeup timer will fire during the hibernate state. The default is currently 90 s > .TP > .B \-p, \-\-show\-progress > show the progress of the tests being run. Each test will identified as it is being > -run. For long tests, a percentage of completion time will be displayed. As of fwts > +run. For long tests, a percentage of completion time will be displayed. As of fwts > 0.19.06 this is enabled by default and can be disabled with \-\-quiet (or \-q). > .TP > .B \-q, \-\-quiet > run quietly with no output to stdout. > .TP > -.B \-D, \-\-show\-progress\-dialog > +.B \-D, \-\-show\-progress\-dialog > output the progress of tests being run in a form that can be piped into the > dialog tool with the \-\-gauge option. > .TP > .B \-s, \-\-show\-tests > -show the names of available tests. By default will show all tests. Use the \-\-batch, \-\-interactive, \-\-batch\-experimental, \-\-interactive\-experimental, \-\-utils > +show the names of available tests. By default will show all tests. Use the \-\-batch, \-\-interactive, \-\-batch\-experimental, \-\-interactive\-experimental, \-\-utils > options to show these specific tests. > .TP > .B \-\-show\-tests\-full > @@ -346,7 +346,7 @@ Int 15 E820 memory map, firmware ROM data. > .B \-v, \-\-version > output version number and build date of the > .B > -fwts > +fwts > tool. > .TP > .B \-w, \-\-width=N > @@ -405,11 +405,11 @@ Run multiple S3 tests with delay between each test ranging from 1 second to 10 s > sudo fwts s3 \-\-s3\-multiple=100 \-\-s3\-min\-delay=1 \-\-s3\-max\-delay=10 \-\-s3\-delay\-delta=0.2 > > .SH SEE ALSO > -.BR iasl (1), > -.BR acpixtract (1), > -.BR acpidump (1), > +.BR iasl (1), > +.BR acpixtract (1), > +.BR acpidump (1), > .BR dtc (1), > -.BR dmidecode (8), > +.BR dmidecode (8), > .BR lspci (8) > .SH AUTHOR > fwts was originally written by Colin King with much of the original test > Acked-by: Ivan Hu <ivan.hu@canonical.com>
diff --git a/doc/fwts.1 b/doc/fwts.1 index e05c111..3c97480 100644 --- a/doc/fwts.1 +++ b/doc/fwts.1 @@ -28,7 +28,7 @@ fwts \- a firmware test suite to identify firmware bugs. .SH DESCRIPTION This manual page documents briefly the .B fwts -firmware test suite. +firmware test suite. The tool .B fwts is comprised of over fifty tests that are designed to examine and test @@ -81,7 +81,7 @@ run all the tests. .TP .B \-\-arch=name specify the target architecture whose firmware is being tested. This allows -fwts to run on one architecture (the host) but perform tests for a different +fwts to run on one architecture (the host) but perform tests for a different architecture (the target). Known architecture strings are: x86, x86_32, or x86_64 for Intel; ia64 for Itanium; arm64 or aarch64 for ARMv8. Unless this option is specified, the target is assumed to be the same as the host. @@ -308,18 +308,18 @@ wakeup timer will fire during the hibernate state. The default is currently 90 s .TP .B \-p, \-\-show\-progress show the progress of the tests being run. Each test will identified as it is being -run. For long tests, a percentage of completion time will be displayed. As of fwts +run. For long tests, a percentage of completion time will be displayed. As of fwts 0.19.06 this is enabled by default and can be disabled with \-\-quiet (or \-q). .TP .B \-q, \-\-quiet run quietly with no output to stdout. .TP -.B \-D, \-\-show\-progress\-dialog +.B \-D, \-\-show\-progress\-dialog output the progress of tests being run in a form that can be piped into the dialog tool with the \-\-gauge option. .TP .B \-s, \-\-show\-tests -show the names of available tests. By default will show all tests. Use the \-\-batch, \-\-interactive, \-\-batch\-experimental, \-\-interactive\-experimental, \-\-utils +show the names of available tests. By default will show all tests. Use the \-\-batch, \-\-interactive, \-\-batch\-experimental, \-\-interactive\-experimental, \-\-utils options to show these specific tests. .TP .B \-\-show\-tests\-full @@ -346,7 +346,7 @@ Int 15 E820 memory map, firmware ROM data. .B \-v, \-\-version output version number and build date of the .B -fwts +fwts tool. .TP .B \-w, \-\-width=N @@ -405,11 +405,11 @@ Run multiple S3 tests with delay between each test ranging from 1 second to 10 s sudo fwts s3 \-\-s3\-multiple=100 \-\-s3\-min\-delay=1 \-\-s3\-max\-delay=10 \-\-s3\-delay\-delta=0.2 .SH SEE ALSO -.BR iasl (1), -.BR acpixtract (1), -.BR acpidump (1), +.BR iasl (1), +.BR acpixtract (1), +.BR acpidump (1), .BR dtc (1), -.BR dmidecode (8), +.BR dmidecode (8), .BR lspci (8) .SH AUTHOR fwts was originally written by Colin King with much of the original test