diff mbox

[v8,05/12] dt-bindings: iio: io-channel-mux: document io-channel-mux bindings

Message ID 1484755035-25927-6-git-send-email-peda@axentia.se
State Not Applicable, archived
Headers show

Commit Message

Peter Rosin Jan. 18, 2017, 3:57 p.m. UTC 
Describe how a multiplexer can be used to select which signal is fed to
an io-channel.

Acked-by: Jonathan Cameron <jic23@kernel.org>
Signed-off-by: Peter Rosin <peda@axentia.se>
---
 .../bindings/iio/multiplexer/io-channel-mux.txt    | 39 ++++++++++++++++++++++
 MAINTAINERS                                        |  6 ++++
 2 files changed, 45 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/iio/multiplexer/io-channel-mux.txt

Comments

Rob Herring Jan. 27, 2017, 7:12 p.m. UTC | #1 
On Wed, Jan 18, 2017 at 04:57:08PM +0100, Peter Rosin wrote:
> Describe how a multiplexer can be used to select which signal is fed to
> an io-channel.
> 
> Acked-by: Jonathan Cameron <jic23@kernel.org>
> Signed-off-by: Peter Rosin <peda@axentia.se>
> ---
>  .../bindings/iio/multiplexer/io-channel-mux.txt    | 39 ++++++++++++++++++++++
>  MAINTAINERS                                        |  6 ++++
>  2 files changed, 45 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/iio/multiplexer/io-channel-mux.txt

Acked-by: Rob Herring <robh@kernel.org>
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/iio/multiplexer/io-channel-mux.txt b/Documentation/devicetree/bindings/iio/multiplexer/io-channel-mux.txt
new file mode 100644
index 000000000000..c82794002595
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/multiplexer/io-channel-mux.txt
@@ -0,0 +1,39 @@ 
+I/O channel multiplexer bindings
+
+If a multiplexer is used to select which hardware signal is fed to
+e.g. an ADC channel, these bindings describe that situation.
+
+Required properties:
+- compatible : "io-channel-mux"
+- io-channels : Channel node of the parent channel that has multiplexed
+		input.
+- io-channel-names : Should be "parent".
+- #address-cells = <1>;
+- #size-cells = <0>;
+- mux-controls : Mux controller node to use for operating the mux
+- channels : List of strings, labeling the mux controller states.
+
+For each non-empty string in the channels property, an io-channel will
+be created. The number of this io-channel is the same as the index into
+the list of strings in the channels property, and also matches the mux
+controller state. The mux controller state is described in
+../mux/mux-controller.txt
+
+Example:
+	mux: mux-controller {
+		compatible = "mux-gpio";
+		#mux-control-cells = <0>;
+
+		mux-gpios = <&pioA 0 GPIO_ACTIVE_HIGH>,
+			    <&pioA 1 GPIO_ACTIVE_HIGH>;
+	};
+
+	adc-mux {
+		compatible = "io-channel-mux";
+		io-channels = <&adc 0>;
+		io-channel-names = "parent";
+
+		mux-controls = <&mux>;
+
+		channels = "sync", "in", "system-regulator";
+	};
diff --git a/MAINTAINERS b/MAINTAINERS
index e4fac17e0fa4..35325a3d9ca4 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -6289,6 +6289,12 @@  F:	Documentation/ABI/testing/sysfs-bus-iio-adc-envelope-detector
 F:	Documentation/devicetree/bindings/iio/adc/envelope-detector.txt
 F:	drivers/iio/adc/envelope-detector.c
 
+IIO MULTIPLEXER
+M:	Peter Rosin <peda@axentia.se>
+L:	linux-iio@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/iio/multiplexer/iio-mux.txt
+
 IIO SUBSYSTEM AND DRIVERS
 M:	Jonathan Cameron <jic23@kernel.org>
 R:	Hartmut Knaack <knaack.h@gmx.de>