| Message ID | 1484617157-6203-1-git-send-email-b18965@freescale.com |
|---|---|
| State | Accepted |
| Commit | 7c5e1feb1d780cc857632c246e78ac7a8e6cf2d7 |
| Delegated to: | York Sun |
| Headers | show |
2017-01-17 2:39 GMT+01:00 Alison Wang <b18965@freescale.com>: > For 64-bit kernel, there is a warning about x1-x3 nonzero in violation > of boot protocol. To fix this issue, input argument 4 is added for > armv8_switch_to_el2 and armv8_switch_to_el1. The input argument 4 will > be set to the right value, such as zero. > > Signed-off-by: Alison Wang <alison.wang@nxp.com> > Reviewed-by: Alexander Graf <agraf@suse.de> > Tested-by: Ryan Harkin <ryan.harkin@linaro.org> > --- > Changes in v3: > - Remove redundant code. > Changes in v2: > - Add another input argument 4 for armv8_switch_to_el2 and > armv8_switch_to_el1. > - Give up the previous way to adjust the parameters to transfer and make > sure x3 is zero. > > arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S | 28 > ++++++++++++++-------------- > arch/arm/cpu/armv8/sec_firmware_asm.S | 6 +++--- > arch/arm/cpu/armv8/start.S | 8 ++++---- > arch/arm/cpu/armv8/transition.S | 22 +++++++++++----------- > arch/arm/include/asm/system.h | 8 +++++--- > arch/arm/lib/bootm.c | 10 +++++----- > arch/arm/mach-rmobile/lowlevel_init_gen3.S | 8 ++++---- > cmd/bootefi.c | 2 +- > 8 files changed, 47 insertions(+), 45 deletions(-) > > diff --git a/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S > b/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S > index 72f2c11..63215f0 100644 > --- a/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S > +++ b/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S > @@ -378,29 +378,29 @@ cpu_is_le: > b.eq 1f > > #ifdef CONFIG_ARMV8_SWITCH_TO_EL1 > - adr x3, secondary_switch_to_el1 > - ldr x4, =ES_TO_AARCH64 > + adr x4, secondary_switch_to_el1 > + ldr x5, =ES_TO_AARCH64 > #else > - ldr x3, [x11] > - ldr x4, =ES_TO_AARCH32 > + ldr x4, [x11] > + ldr x5, =ES_TO_AARCH32 > #endif > bl secondary_switch_to_el2 > > 1: > #ifdef CONFIG_ARMV8_SWITCH_TO_EL1 > - adr x3, secondary_switch_to_el1 > + adr x4, secondary_switch_to_el1 > #else > - ldr x3, [x11] > + ldr x4, [x11] > #endif > - ldr x4, =ES_TO_AARCH64 > + ldr x5, =ES_TO_AARCH64 > bl secondary_switch_to_el2 > > ENDPROC(secondary_boot_func) > > ENTRY(secondary_switch_to_el2) > - switch_el x5, 1f, 0f, 0f > + switch_el x6, 1f, 0f, 0f > 0: ret > -1: armv8_switch_to_el2_m x3, x4, x5 > +1: armv8_switch_to_el2_m x4, x5, x6 > ENDPROC(secondary_switch_to_el2) > > ENTRY(secondary_switch_to_el1) > @@ -414,22 +414,22 @@ ENTRY(secondary_switch_to_el1) > /* physical address of this cpus spin table element */ > add x11, x1, x0 > > - ldr x3, [x11] > + ldr x4, [x11] > > ldr x5, [x11, #24] > ldr x6, =IH_ARCH_DEFAULT > cmp x6, x5 > b.eq 2f > > - ldr x4, =ES_TO_AARCH32 > + ldr x5, =ES_TO_AARCH32 > bl switch_to_el1 > > -2: ldr x4, =ES_TO_AARCH64 > +2: ldr x5, =ES_TO_AARCH64 > > switch_to_el1: > - switch_el x5, 0f, 1f, 0f > + switch_el x6, 0f, 1f, 0f > 0: ret > -1: armv8_switch_to_el1_m x3, x4, x5 > +1: armv8_switch_to_el1_m x4, x5, x6 > ENDPROC(secondary_switch_to_el1) > > /* Ensure that the literals used by the secondary boot code are > diff --git a/arch/arm/cpu/armv8/sec_firmware_asm.S > b/arch/arm/cpu/armv8/sec_firmware_asm.S > index 903195d..5ed3677 100644 > --- a/arch/arm/cpu/armv8/sec_firmware_asm.S > +++ b/arch/arm/cpu/armv8/sec_firmware_asm.S > @@ -57,7 +57,8 @@ ENDPROC(_sec_firmware_support_psci_version) > * x0: argument, zero > * x1: machine nr > * x2: fdt address > - * x3: kernel entry point > + * x3: input argument > + * x4: kernel entry point > * @param outputs for secure firmware: > * x0: function id > * x1: kernel entry point > @@ -65,10 +66,9 @@ ENDPROC(_sec_firmware_support_psci_version) > * x3: fdt address > */ > ENTRY(armv8_el2_to_aarch32) > - mov x0, x3 > mov x3, x2 > mov x2, x1 > - mov x1, x0 > + mov x1, x4 > ldr x0, =0xc000ff04 > smc #0 > ret > diff --git a/arch/arm/cpu/armv8/start.S b/arch/arm/cpu/armv8/start.S > index 9535057..eb1b8a6 100644 > --- a/arch/arm/cpu/armv8/start.S > +++ b/arch/arm/cpu/armv8/start.S > @@ -250,14 +250,14 @@ WEAK(lowlevel_init) > /* > * All slaves will enter EL2 and optionally EL1. > */ > - adr x3, lowlevel_in_el2 > - ldr x4, =ES_TO_AARCH64 > + adr x4, lowlevel_in_el2 > + ldr x5, =ES_TO_AARCH64 > bl armv8_switch_to_el2 > > lowlevel_in_el2: > #ifdef CONFIG_ARMV8_SWITCH_TO_EL1 > - adr x3, lowlevel_in_el1 > - ldr x4, =ES_TO_AARCH64 > + adr x4, lowlevel_in_el1 > + ldr x5, =ES_TO_AARCH64 > bl armv8_switch_to_el1 > > lowlevel_in_el1: > diff --git a/arch/arm/cpu/armv8/transition.S b/arch/arm/cpu/armv8/ > transition.S > index adb9f35..ca07465 100644 > --- a/arch/arm/cpu/armv8/transition.S > +++ b/arch/arm/cpu/armv8/transition.S > @@ -11,9 +11,9 @@ > #include <asm/macro.h> > > ENTRY(armv8_switch_to_el2) > - switch_el x5, 1f, 0f, 0f > + switch_el x6, 1f, 0f, 0f > 0: > - cmp x4, #ES_TO_AARCH64 > + cmp x5, #ES_TO_AARCH64 > b.eq 2f > /* > * When loading 32-bit kernel, it will jump > @@ -22,23 +22,23 @@ ENTRY(armv8_switch_to_el2) > bl armv8_el2_to_aarch32 > 2: > /* > - * x3 is kernel entry point or switch_to_el1 > + * x4 is kernel entry point or switch_to_el1 > * if CONFIG_ARMV8_SWITCH_TO_EL1 is defined. > * When running in EL2 now, jump to the > - * address saved in x3. > + * address saved in x4. > */ > - br x3 > -1: armv8_switch_to_el2_m x3, x4, x5 > + br x4 > +1: armv8_switch_to_el2_m x4, x5, x6 > ENDPROC(armv8_switch_to_el2) > > ENTRY(armv8_switch_to_el1) > - switch_el x5, 0f, 1f, 0f > + switch_el x6, 0f, 1f, 0f > 0: > - /* x3 is kernel entry point. When running in EL1 > - * now, jump to the address saved in x3. > + /* x4 is kernel entry point. When running in EL1 > + * now, jump to the address saved in x4. > */ > - br x3 > -1: armv8_switch_to_el1_m x3, x4, x5 > + br x4 > +1: armv8_switch_to_el1_m x4, x5, x6 > ENDPROC(armv8_switch_to_el1) > > WEAK(armv8_el2_to_aarch32) > diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h > index dc4c991..766e929 100644 > --- a/arch/arm/include/asm/system.h > +++ b/arch/arm/include/asm/system.h > @@ -196,11 +196,12 @@ void __asm_switch_ttbr(u64 new_ttbr); > * For loading 32-bit OS, machine nr > * @fdt_addr: For loading 64-bit OS, zero. > * For loading 32-bit OS, fdt address. > + * @arg4: Input argument. > * @entry_point: kernel entry point > * @es_flag: execution state flag, ES_TO_AARCH64 or ES_TO_AARCH32 > */ > void armv8_switch_to_el2(u64 args, u64 mach_nr, u64 fdt_addr, > - u64 entry_point, u64 es_flag); > + u64 arg4, u64 entry_point, u64 es_flag); > /* > * Switch from EL2 to EL1 for ARMv8 > * > @@ -210,13 +211,14 @@ void armv8_switch_to_el2(u64 args, u64 mach_nr, u64 > fdt_addr, > * For loading 32-bit OS, machine nr > * @fdt_addr: For loading 64-bit OS, zero. > * For loading 32-bit OS, fdt address. > + * @arg4: Input argument. > * @entry_point: kernel entry point > * @es_flag: execution state flag, ES_TO_AARCH64 or ES_TO_AARCH32 > */ > void armv8_switch_to_el1(u64 args, u64 mach_nr, u64 fdt_addr, > - u64 entry_point, u64 es_flag); > + u64 arg4, u64 entry_point, u64 es_flag); > void armv8_el2_to_aarch32(u64 args, u64 mach_nr, u64 fdt_addr, > - u64 entry_point); > + u64 arg4, u64 entry_point); > void gic_init(void); > void gic_send_sgi(unsigned long sgino); > void wait_for_wakeup(void); > diff --git a/arch/arm/lib/bootm.c b/arch/arm/lib/bootm.c > index 43cc83e..8125cf0 100644 > --- a/arch/arm/lib/bootm.c > +++ b/arch/arm/lib/bootm.c > @@ -287,11 +287,11 @@ static void switch_to_el1(void) > if ((IH_ARCH_DEFAULT == IH_ARCH_ARM64) && > (images.os.arch == IH_ARCH_ARM)) > armv8_switch_to_el1(0, (u64)gd->bd->bi_arch_number, > - (u64)images.ft_addr, > + (u64)images.ft_addr, 0, > (u64)images.ep, > ES_TO_AARCH32); > else > - armv8_switch_to_el1((u64)images.ft_addr, 0, 0, > + armv8_switch_to_el1((u64)images.ft_addr, 0, 0, 0, > images.ep, > ES_TO_AARCH64); > } > @@ -324,17 +324,17 @@ static void boot_jump_linux(bootm_headers_t > *images, int flag) > update_os_arch_secondary_cores(images->os.arch); > > #ifdef CONFIG_ARMV8_SWITCH_TO_EL1 > - armv8_switch_to_el2((u64)images->ft_addr, 0, 0, > + armv8_switch_to_el2((u64)images->ft_addr, 0, 0, 0, > (u64)switch_to_el1, ES_TO_AARCH64); > #else > if ((IH_ARCH_DEFAULT == IH_ARCH_ARM64) && > (images->os.arch == IH_ARCH_ARM)) > armv8_switch_to_el2(0, (u64)gd->bd->bi_arch_number, > - (u64)images->ft_addr, > + (u64)images->ft_addr, 0, > (u64)images->ep, > ES_TO_AARCH32); > else > - armv8_switch_to_el2((u64)images->ft_addr, 0, 0, > + armv8_switch_to_el2((u64)images->ft_addr, 0, 0, 0, > images->ep, > ES_TO_AARCH64); > #endif > diff --git a/arch/arm/mach-rmobile/lowlevel_init_gen3.S > b/arch/arm/mach-rmobile/lowlevel_init_gen3.S > index 11acce0..ce3d4f5 100644 > --- a/arch/arm/mach-rmobile/lowlevel_init_gen3.S > +++ b/arch/arm/mach-rmobile/lowlevel_init_gen3.S > @@ -61,14 +61,14 @@ ENTRY(lowlevel_init) > /* > * All slaves will enter EL2 and optionally EL1. > */ > - adr x3, lowlevel_in_el2 > - ldr x4, =ES_TO_AARCH64 > + adr x4, lowlevel_in_el2 > + ldr x5, =ES_TO_AARCH64 > bl armv8_switch_to_el2 > > lowlevel_in_el2: > #ifdef CONFIG_ARMV8_SWITCH_TO_EL1 > - adr x3, lowlevel_in_el1 > - ldr x4, =ES_TO_AARCH64 > + adr x4, lowlevel_in_el1 > + ldr x5, =ES_TO_AARCH64 > bl armv8_switch_to_el1 > > lowlevel_in_el1: > diff --git a/cmd/bootefi.c b/cmd/bootefi.c > index 97a0fc9..06943a9 100644 > --- a/cmd/bootefi.c > +++ b/cmd/bootefi.c > @@ -246,7 +246,7 @@ static unsigned long do_bootefi_exec(void *efi, void > *fdt) > > /* Move into EL2 and keep running there */ > armv8_switch_to_el2((ulong)entry, > (ulong)&loaded_image_info, > - (ulong)&systab, (ulong)efi_run_in_el2, > + (ulong)&systab, 0, > (ulong)efi_run_in_el2, > ES_TO_AARCH64); > > /* Should never reach here, efi exits with longjmp */ > ZynqMP is also booting fine. Tested-by: Michal Simek <michal.simek@xilinx.com> Thanks, Michal
On 01/16/2017 05:52 PM, Alison Wang wrote: > For 64-bit kernel, there is a warning about x1-x3 nonzero in violation > of boot protocol. To fix this issue, input argument 4 is added for > armv8_switch_to_el2 and armv8_switch_to_el1. The input argument 4 will > be set to the right value, such as zero. > > Signed-off-by: Alison Wang <alison.wang@nxp.com> > Reviewed-by: Alexander Graf <agraf@suse.de> > Tested-by: Ryan Harkin <ryan.harkin@linaro.org> > --- > Changes in v3: > - Remove redundant code. > Changes in v2: > - Add another input argument 4 for armv8_switch_to_el2 and armv8_switch_to_el1. > - Give up the previous way to adjust the parameters to transfer and make sure x3 is zero. Applied to fsl-qoriq master, awaiting upstream. Thanks. York
diff --git a/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S b/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S index 72f2c11..63215f0 100644 --- a/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S +++ b/arch/arm/cpu/armv8/fsl-layerscape/lowlevel.S @@ -378,29 +378,29 @@ cpu_is_le: b.eq 1f #ifdef CONFIG_ARMV8_SWITCH_TO_EL1 - adr x3, secondary_switch_to_el1 - ldr x4, =ES_TO_AARCH64 + adr x4, secondary_switch_to_el1 + ldr x5, =ES_TO_AARCH64 #else - ldr x3, [x11] - ldr x4, =ES_TO_AARCH32 + ldr x4, [x11] + ldr x5, =ES_TO_AARCH32 #endif bl secondary_switch_to_el2 1: #ifdef CONFIG_ARMV8_SWITCH_TO_EL1 - adr x3, secondary_switch_to_el1 + adr x4, secondary_switch_to_el1 #else - ldr x3, [x11] + ldr x4, [x11] #endif - ldr x4, =ES_TO_AARCH64 + ldr x5, =ES_TO_AARCH64 bl secondary_switch_to_el2 ENDPROC(secondary_boot_func) ENTRY(secondary_switch_to_el2) - switch_el x5, 1f, 0f, 0f + switch_el x6, 1f, 0f, 0f 0: ret -1: armv8_switch_to_el2_m x3, x4, x5 +1: armv8_switch_to_el2_m x4, x5, x6 ENDPROC(secondary_switch_to_el2) ENTRY(secondary_switch_to_el1) @@ -414,22 +414,22 @@ ENTRY(secondary_switch_to_el1) /* physical address of this cpus spin table element */ add x11, x1, x0 - ldr x3, [x11] + ldr x4, [x11] ldr x5, [x11, #24] ldr x6, =IH_ARCH_DEFAULT cmp x6, x5 b.eq 2f - ldr x4, =ES_TO_AARCH32 + ldr x5, =ES_TO_AARCH32 bl switch_to_el1 -2: ldr x4, =ES_TO_AARCH64 +2: ldr x5, =ES_TO_AARCH64 switch_to_el1: - switch_el x5, 0f, 1f, 0f + switch_el x6, 0f, 1f, 0f 0: ret -1: armv8_switch_to_el1_m x3, x4, x5 +1: armv8_switch_to_el1_m x4, x5, x6 ENDPROC(secondary_switch_to_el1) /* Ensure that the literals used by the secondary boot code are diff --git a/arch/arm/cpu/armv8/sec_firmware_asm.S b/arch/arm/cpu/armv8/sec_firmware_asm.S index 903195d..5ed3677 100644 --- a/arch/arm/cpu/armv8/sec_firmware_asm.S +++ b/arch/arm/cpu/armv8/sec_firmware_asm.S @@ -57,7 +57,8 @@ ENDPROC(_sec_firmware_support_psci_version) * x0: argument, zero * x1: machine nr * x2: fdt address - * x3: kernel entry point + * x3: input argument + * x4: kernel entry point * @param outputs for secure firmware: * x0: function id * x1: kernel entry point @@ -65,10 +66,9 @@ ENDPROC(_sec_firmware_support_psci_version) * x3: fdt address */ ENTRY(armv8_el2_to_aarch32) - mov x0, x3 mov x3, x2 mov x2, x1 - mov x1, x0 + mov x1, x4 ldr x0, =0xc000ff04 smc #0 ret diff --git a/arch/arm/cpu/armv8/start.S b/arch/arm/cpu/armv8/start.S index 9535057..eb1b8a6 100644 --- a/arch/arm/cpu/armv8/start.S +++ b/arch/arm/cpu/armv8/start.S @@ -250,14 +250,14 @@ WEAK(lowlevel_init) /* * All slaves will enter EL2 and optionally EL1. */ - adr x3, lowlevel_in_el2 - ldr x4, =ES_TO_AARCH64 + adr x4, lowlevel_in_el2 + ldr x5, =ES_TO_AARCH64 bl armv8_switch_to_el2 lowlevel_in_el2: #ifdef CONFIG_ARMV8_SWITCH_TO_EL1 - adr x3, lowlevel_in_el1 - ldr x4, =ES_TO_AARCH64 + adr x4, lowlevel_in_el1 + ldr x5, =ES_TO_AARCH64 bl armv8_switch_to_el1 lowlevel_in_el1: diff --git a/arch/arm/cpu/armv8/transition.S b/arch/arm/cpu/armv8/transition.S index adb9f35..ca07465 100644 --- a/arch/arm/cpu/armv8/transition.S +++ b/arch/arm/cpu/armv8/transition.S @@ -11,9 +11,9 @@ #include <asm/macro.h> ENTRY(armv8_switch_to_el2) - switch_el x5, 1f, 0f, 0f + switch_el x6, 1f, 0f, 0f 0: - cmp x4, #ES_TO_AARCH64 + cmp x5, #ES_TO_AARCH64 b.eq 2f /* * When loading 32-bit kernel, it will jump @@ -22,23 +22,23 @@ ENTRY(armv8_switch_to_el2) bl armv8_el2_to_aarch32 2: /* - * x3 is kernel entry point or switch_to_el1 + * x4 is kernel entry point or switch_to_el1 * if CONFIG_ARMV8_SWITCH_TO_EL1 is defined. * When running in EL2 now, jump to the - * address saved in x3. + * address saved in x4. */ - br x3 -1: armv8_switch_to_el2_m x3, x4, x5 + br x4 +1: armv8_switch_to_el2_m x4, x5, x6 ENDPROC(armv8_switch_to_el2) ENTRY(armv8_switch_to_el1) - switch_el x5, 0f, 1f, 0f + switch_el x6, 0f, 1f, 0f 0: - /* x3 is kernel entry point. When running in EL1 - * now, jump to the address saved in x3. + /* x4 is kernel entry point. When running in EL1 + * now, jump to the address saved in x4. */ - br x3 -1: armv8_switch_to_el1_m x3, x4, x5 + br x4 +1: armv8_switch_to_el1_m x4, x5, x6 ENDPROC(armv8_switch_to_el1) WEAK(armv8_el2_to_aarch32) diff --git a/arch/arm/include/asm/system.h b/arch/arm/include/asm/system.h index dc4c991..766e929 100644 --- a/arch/arm/include/asm/system.h +++ b/arch/arm/include/asm/system.h @@ -196,11 +196,12 @@ void __asm_switch_ttbr(u64 new_ttbr); * For loading 32-bit OS, machine nr * @fdt_addr: For loading 64-bit OS, zero. * For loading 32-bit OS, fdt address. + * @arg4: Input argument. * @entry_point: kernel entry point * @es_flag: execution state flag, ES_TO_AARCH64 or ES_TO_AARCH32 */ void armv8_switch_to_el2(u64 args, u64 mach_nr, u64 fdt_addr, - u64 entry_point, u64 es_flag); + u64 arg4, u64 entry_point, u64 es_flag); /* * Switch from EL2 to EL1 for ARMv8 * @@ -210,13 +211,14 @@ void armv8_switch_to_el2(u64 args, u64 mach_nr, u64 fdt_addr, * For loading 32-bit OS, machine nr * @fdt_addr: For loading 64-bit OS, zero. * For loading 32-bit OS, fdt address. + * @arg4: Input argument. * @entry_point: kernel entry point * @es_flag: execution state flag, ES_TO_AARCH64 or ES_TO_AARCH32 */ void armv8_switch_to_el1(u64 args, u64 mach_nr, u64 fdt_addr, - u64 entry_point, u64 es_flag); + u64 arg4, u64 entry_point, u64 es_flag); void armv8_el2_to_aarch32(u64 args, u64 mach_nr, u64 fdt_addr, - u64 entry_point); + u64 arg4, u64 entry_point); void gic_init(void); void gic_send_sgi(unsigned long sgino); void wait_for_wakeup(void); diff --git a/arch/arm/lib/bootm.c b/arch/arm/lib/bootm.c index 43cc83e..8125cf0 100644 --- a/arch/arm/lib/bootm.c +++ b/arch/arm/lib/bootm.c @@ -287,11 +287,11 @@ static void switch_to_el1(void) if ((IH_ARCH_DEFAULT == IH_ARCH_ARM64) && (images.os.arch == IH_ARCH_ARM)) armv8_switch_to_el1(0, (u64)gd->bd->bi_arch_number, - (u64)images.ft_addr, + (u64)images.ft_addr, 0, (u64)images.ep, ES_TO_AARCH32); else - armv8_switch_to_el1((u64)images.ft_addr, 0, 0, + armv8_switch_to_el1((u64)images.ft_addr, 0, 0, 0, images.ep, ES_TO_AARCH64); } @@ -324,17 +324,17 @@ static void boot_jump_linux(bootm_headers_t *images, int flag) update_os_arch_secondary_cores(images->os.arch); #ifdef CONFIG_ARMV8_SWITCH_TO_EL1 - armv8_switch_to_el2((u64)images->ft_addr, 0, 0, + armv8_switch_to_el2((u64)images->ft_addr, 0, 0, 0, (u64)switch_to_el1, ES_TO_AARCH64); #else if ((IH_ARCH_DEFAULT == IH_ARCH_ARM64) && (images->os.arch == IH_ARCH_ARM)) armv8_switch_to_el2(0, (u64)gd->bd->bi_arch_number, - (u64)images->ft_addr, + (u64)images->ft_addr, 0, (u64)images->ep, ES_TO_AARCH32); else - armv8_switch_to_el2((u64)images->ft_addr, 0, 0, + armv8_switch_to_el2((u64)images->ft_addr, 0, 0, 0, images->ep, ES_TO_AARCH64); #endif diff --git a/arch/arm/mach-rmobile/lowlevel_init_gen3.S b/arch/arm/mach-rmobile/lowlevel_init_gen3.S index 11acce0..ce3d4f5 100644 --- a/arch/arm/mach-rmobile/lowlevel_init_gen3.S +++ b/arch/arm/mach-rmobile/lowlevel_init_gen3.S @@ -61,14 +61,14 @@ ENTRY(lowlevel_init) /* * All slaves will enter EL2 and optionally EL1. */ - adr x3, lowlevel_in_el2 - ldr x4, =ES_TO_AARCH64 + adr x4, lowlevel_in_el2 + ldr x5, =ES_TO_AARCH64 bl armv8_switch_to_el2 lowlevel_in_el2: #ifdef CONFIG_ARMV8_SWITCH_TO_EL1 - adr x3, lowlevel_in_el1 - ldr x4, =ES_TO_AARCH64 + adr x4, lowlevel_in_el1 + ldr x5, =ES_TO_AARCH64 bl armv8_switch_to_el1 lowlevel_in_el1: diff --git a/cmd/bootefi.c b/cmd/bootefi.c index 97a0fc9..06943a9 100644 --- a/cmd/bootefi.c +++ b/cmd/bootefi.c @@ -246,7 +246,7 @@ static unsigned long do_bootefi_exec(void *efi, void *fdt) /* Move into EL2 and keep running there */ armv8_switch_to_el2((ulong)entry, (ulong)&loaded_image_info, - (ulong)&systab, (ulong)efi_run_in_el2, + (ulong)&systab, 0, (ulong)efi_run_in_el2, ES_TO_AARCH64); /* Should never reach here, efi exits with longjmp */