Message ID | 20101116205010.12146.37154.stgit@riker (mailing list archive) |
---|---|
State | Superseded |
Headers | show |
On Tue, Nov 16, 2010 at 12:50:10PM -0800, John Bonesio wrote: > This patch remove unused properties in dts files in preparation of refactoring > the dts files for MPC5200b based boards. > > Signed-off-by: John Bonesio <bones@secretlab.ca> > --- > > arch/powerpc/boot/dts/cm5200.dts | 2 -- > arch/powerpc/boot/dts/lite5200b.dts | 3 --- > arch/powerpc/boot/dts/media5200.dts | 2 -- > arch/powerpc/boot/dts/motionpro.dts | 2 -- > arch/powerpc/boot/dts/pcm030.dts | 2 -- > arch/powerpc/boot/dts/pcm032.dts | 2 -- > 6 files changed, 0 insertions(+), 13 deletions(-) > > diff --git a/arch/powerpc/boot/dts/cm5200.dts b/arch/powerpc/boot/dts/cm5200.dts > index 9369dcd..d549897 100644 > --- a/arch/powerpc/boot/dts/cm5200.dts > +++ b/arch/powerpc/boot/dts/cm5200.dts > @@ -230,8 +230,6 @@ > reg = <0 0 0x2000000>; > bank-width = <2>; > device-width = <2>; > - #size-cells = <1>; > - #address-cells = <1>; > }; > }; > }; > diff --git a/arch/powerpc/boot/dts/lite5200b.dts b/arch/powerpc/boot/dts/lite5200b.dts > index a74b790..c0a4e45 100644 > --- a/arch/powerpc/boot/dts/lite5200b.dts > +++ b/arch/powerpc/boot/dts/lite5200b.dts > @@ -174,7 +174,6 @@ > > psc@2000 { // PSC1 > compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; > - cell-index = <0>; > reg = <0x2000 0x100>; > interrupts = <2 1 0>; > }; > @@ -198,7 +197,6 @@ > // PSC4 in uart mode example > //serial@2600 { // PSC4 > // compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; > - // cell-index = <3>; > // reg = <0x2600 0x100>; > // interrupts = <2 11 0>; > //}; > @@ -206,7 +204,6 @@ > // PSC5 in uart mode example > //serial@2800 { // PSC5 > // compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; > - // cell-index = <4>; > // reg = <0x2800 0x100>; > // interrupts = <2 12 0>; > //}; How about deleting the commented out nodes entirely since they can now be captured in the mpc5200.dtsi file. > diff --git a/arch/powerpc/boot/dts/media5200.dts b/arch/powerpc/boot/dts/media5200.dts > index a70ef68..e027f45 100644 > --- a/arch/powerpc/boot/dts/media5200.dts > +++ b/arch/powerpc/boot/dts/media5200.dts > @@ -185,8 +185,6 @@ > // PSC6 in uart mode > console: psc@2c00 { // PSC6 > compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; > - cell-index = <5>; > - port-number = <0>; // Logical port assignment > reg = <0x2c00 0x100>; > interrupts = <2 4 0>; > }; > diff --git a/arch/powerpc/boot/dts/motionpro.dts b/arch/powerpc/boot/dts/motionpro.dts > index f6261ea..3ab4666 100644 > --- a/arch/powerpc/boot/dts/motionpro.dts > +++ b/arch/powerpc/boot/dts/motionpro.dts > @@ -277,8 +277,6 @@ > reg = <0 0 0x01000000>; > bank-width = <2>; > device-width = <2>; > - #size-cells = <1>; > - #address-cells = <1>; > }; > }; > }; > diff --git a/arch/powerpc/boot/dts/pcm030.dts b/arch/powerpc/boot/dts/pcm030.dts > index 3a4f554..f3e30bb 100644 > --- a/arch/powerpc/boot/dts/pcm030.dts > +++ b/arch/powerpc/boot/dts/pcm030.dts > @@ -196,7 +196,6 @@ > > psc@2400 { /* PSC3 in UART mode */ > compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; > - cell-index = <2>; > reg = <0x2400 0x100>; > interrupts = <2 3 0>; > }; > @@ -207,7 +206,6 @@ > > psc@2c00 { /* PSC6 in UART mode */ > compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; > - cell-index = <5>; > reg = <0x2c00 0x100>; > interrupts = <2 4 0>; > }; > diff --git a/arch/powerpc/boot/dts/pcm032.dts b/arch/powerpc/boot/dts/pcm032.dts > index 17596c7..e0f2702 100644 > --- a/arch/powerpc/boot/dts/pcm032.dts > +++ b/arch/powerpc/boot/dts/pcm032.dts > @@ -196,7 +196,6 @@ > > psc@2400 { /* PSC3 in UART mode */ > compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; > - cell-index = <2>; > reg = <0x2400 0x100>; > interrupts = <2 3 0>; > }; > @@ -207,7 +206,6 @@ > > psc@2c00 { /* PSC6 in UART mode */ > compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; > - cell-index = <5>; > reg = <0x2c00 0x100>; > interrupts = <2 4 0>; > }; >
diff --git a/arch/powerpc/boot/dts/cm5200.dts b/arch/powerpc/boot/dts/cm5200.dts index 9369dcd..d549897 100644 --- a/arch/powerpc/boot/dts/cm5200.dts +++ b/arch/powerpc/boot/dts/cm5200.dts @@ -230,8 +230,6 @@ reg = <0 0 0x2000000>; bank-width = <2>; device-width = <2>; - #size-cells = <1>; - #address-cells = <1>; }; }; }; diff --git a/arch/powerpc/boot/dts/lite5200b.dts b/arch/powerpc/boot/dts/lite5200b.dts index a74b790..c0a4e45 100644 --- a/arch/powerpc/boot/dts/lite5200b.dts +++ b/arch/powerpc/boot/dts/lite5200b.dts @@ -174,7 +174,6 @@ psc@2000 { // PSC1 compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; - cell-index = <0>; reg = <0x2000 0x100>; interrupts = <2 1 0>; }; @@ -198,7 +197,6 @@ // PSC4 in uart mode example //serial@2600 { // PSC4 // compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; - // cell-index = <3>; // reg = <0x2600 0x100>; // interrupts = <2 11 0>; //}; @@ -206,7 +204,6 @@ // PSC5 in uart mode example //serial@2800 { // PSC5 // compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; - // cell-index = <4>; // reg = <0x2800 0x100>; // interrupts = <2 12 0>; //}; diff --git a/arch/powerpc/boot/dts/media5200.dts b/arch/powerpc/boot/dts/media5200.dts index a70ef68..e027f45 100644 --- a/arch/powerpc/boot/dts/media5200.dts +++ b/arch/powerpc/boot/dts/media5200.dts @@ -185,8 +185,6 @@ // PSC6 in uart mode console: psc@2c00 { // PSC6 compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; - cell-index = <5>; - port-number = <0>; // Logical port assignment reg = <0x2c00 0x100>; interrupts = <2 4 0>; }; diff --git a/arch/powerpc/boot/dts/motionpro.dts b/arch/powerpc/boot/dts/motionpro.dts index f6261ea..3ab4666 100644 --- a/arch/powerpc/boot/dts/motionpro.dts +++ b/arch/powerpc/boot/dts/motionpro.dts @@ -277,8 +277,6 @@ reg = <0 0 0x01000000>; bank-width = <2>; device-width = <2>; - #size-cells = <1>; - #address-cells = <1>; }; }; }; diff --git a/arch/powerpc/boot/dts/pcm030.dts b/arch/powerpc/boot/dts/pcm030.dts index 3a4f554..f3e30bb 100644 --- a/arch/powerpc/boot/dts/pcm030.dts +++ b/arch/powerpc/boot/dts/pcm030.dts @@ -196,7 +196,6 @@ psc@2400 { /* PSC3 in UART mode */ compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; - cell-index = <2>; reg = <0x2400 0x100>; interrupts = <2 3 0>; }; @@ -207,7 +206,6 @@ psc@2c00 { /* PSC6 in UART mode */ compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; - cell-index = <5>; reg = <0x2c00 0x100>; interrupts = <2 4 0>; }; diff --git a/arch/powerpc/boot/dts/pcm032.dts b/arch/powerpc/boot/dts/pcm032.dts index 17596c7..e0f2702 100644 --- a/arch/powerpc/boot/dts/pcm032.dts +++ b/arch/powerpc/boot/dts/pcm032.dts @@ -196,7 +196,6 @@ psc@2400 { /* PSC3 in UART mode */ compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; - cell-index = <2>; reg = <0x2400 0x100>; interrupts = <2 3 0>; }; @@ -207,7 +206,6 @@ psc@2c00 { /* PSC6 in UART mode */ compatible = "fsl,mpc5200b-psc-uart","fsl,mpc5200-psc-uart"; - cell-index = <5>; reg = <0x2c00 0x100>; interrupts = <2 4 0>; };
This patch remove unused properties in dts files in preparation of refactoring the dts files for MPC5200b based boards. Signed-off-by: John Bonesio <bones@secretlab.ca> --- arch/powerpc/boot/dts/cm5200.dts | 2 -- arch/powerpc/boot/dts/lite5200b.dts | 3 --- arch/powerpc/boot/dts/media5200.dts | 2 -- arch/powerpc/boot/dts/motionpro.dts | 2 -- arch/powerpc/boot/dts/pcm030.dts | 2 -- arch/powerpc/boot/dts/pcm032.dts | 2 -- 6 files changed, 0 insertions(+), 13 deletions(-)