| Message ID | 148396204569.1471.7515038338417988537.stgit@aravinda |
|---|---|
| State | Superseded |
| Headers | show |
On Mon, Jan 09, 2017 at 05:10:45PM +0530, Aravinda Prasad wrote: > Enhance KVM to cause a guest exit with KVM_EXIT_NMI > exit reason upon a machine check exception (MCE) in > the guest address space if the KVM_CAP_PPC_FWNMI > capability is enabled (instead of delivering a 0x200 > interrupt to guest). This enables QEMU to build error > log and deliver machine check exception to guest via > guest registered machine check handler. > > This approach simplifies the delivery of machine > check exception to guest OS compared to the earlier > approach of KVM directly invoking 0x200 guest interrupt > vector. > > This design/approach is based on the feedback for the > QEMU patches to handle machine check exception. Details > of earlier approach of handling machine check exception > in QEMU and related discussions can be found at: > > https://lists.nongnu.org/archive/html/qemu-devel/2014-11/msg00813.html > > Note: > > This patch introduces a hook which is invoked at the time > of guest exit to facilitate the host-side handling of > machine check exception before the exception is passed > on to the guest. Hence, the host-side handling which was > performed earlier via machine_check_fwnmi is removed. > > The reasons for this approach is (i) it is not possible > to distinguish whether the exception occurred in the > guest or the host from the pt_regs passed on the > machine_check_exception(). Hence machine_check_exception() > calls panic, instead of passing on the exception to > the guest, if the machine check exception is not > recoverable. (ii) the approach introduced in this > patch gives opportunity to the host kernel to perform > actions in virtual mode before passing on the exception > to the guest. This approach does not require complex > tweaks to machine_check_fwnmi and friends. > > Signed-off-by: Aravinda Prasad <aravinda@linux.vnet.ibm.com> Reviewed-by: David Gibson <david@gibson.dropbear.id.au> > --- > arch/powerpc/kvm/book3s_hv.c | 27 +++++++++++++----- > arch/powerpc/kvm/book3s_hv_rmhandlers.S | 47 ++++++++++++++++--------------- > arch/powerpc/platforms/powernv/opal.c | 10 +++++++ > 3 files changed, 54 insertions(+), 30 deletions(-) > > diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c > index 3686471..cae4921 100644 > --- a/arch/powerpc/kvm/book3s_hv.c > +++ b/arch/powerpc/kvm/book3s_hv.c > @@ -123,6 +123,7 @@ MODULE_PARM_DESC(halt_poll_ns_shrink, "Factor halt poll time is shrunk by"); > > static void kvmppc_end_cede(struct kvm_vcpu *vcpu); > static int kvmppc_hv_setup_htab_rma(struct kvm_vcpu *vcpu); > +static void kvmppc_machine_check_hook(void); > > static inline struct kvm_vcpu *next_runnable_thread(struct kvmppc_vcore *vc, > int *ip) > @@ -954,15 +955,14 @@ static int kvmppc_handle_exit_hv(struct kvm_run *run, struct kvm_vcpu *vcpu, > r = RESUME_GUEST; > break; > case BOOK3S_INTERRUPT_MACHINE_CHECK: > + /* Exit to guest with KVM_EXIT_NMI as exit reason */ > + run->exit_reason = KVM_EXIT_NMI; > + r = RESUME_HOST; > /* > - * Deliver a machine check interrupt to the guest. > - * We have to do this, even if the host has handled the > - * machine check, because machine checks use SRR0/1 and > - * the interrupt might have trashed guest state in them. > + * Invoke host-kernel handler to perform any host-side > + * handling before exiting the guest. > */ > - kvmppc_book3s_queue_irqprio(vcpu, > - BOOK3S_INTERRUPT_MACHINE_CHECK); > - r = RESUME_GUEST; > + kvmppc_machine_check_hook(); > break; > case BOOK3S_INTERRUPT_PROGRAM: > { > @@ -3491,6 +3491,19 @@ static void kvmppc_irq_bypass_del_producer_hv(struct irq_bypass_consumer *cons, > } > #endif > > +/* > + * Hook to handle machine check exceptions occurred inside a guest. > + * This hook is invoked from host virtual mode from KVM before exiting > + * the guest with KVM_EXIT_NMI exit reason. This gives an opportunity > + * for the host to take action (if any) before passing on the machine > + * check exception to the guest kernel. > + */ > +static void kvmppc_machine_check_hook(void) > +{ > + if (ppc_md.machine_check_exception) > + ppc_md.machine_check_exception(NULL); > +} > + > static long kvm_arch_vm_ioctl_hv(struct file *filp, > unsigned int ioctl, unsigned long arg) > { > diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S > index c3c1d1b..9b41390 100644 > --- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S > +++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S > @@ -134,21 +134,18 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S) > stb r0, HSTATE_HWTHREAD_REQ(r13) > > /* > - * For external and machine check interrupts, we need > - * to call the Linux handler to process the interrupt. > - * We do that by jumping to absolute address 0x500 for > - * external interrupts, or the machine_check_fwnmi label > - * for machine checks (since firmware might have patched > - * the vector area at 0x200). The [h]rfid at the end of the > - * handler will return to the book3s_hv_interrupts.S code. > - * For other interrupts we do the rfid to get back > - * to the book3s_hv_interrupts.S code here. > + * For external interrupts we need to call the Linux > + * handler to process the interrupt. We do that by jumping > + * to absolute address 0x500 for external interrupts. > + * The [h]rfid at the end of the handler will return to > + * the book3s_hv_interrupts.S code. For other interrupts > + * we do the rfid to get back to the book3s_hv_interrupts.S > + * code here. > */ > ld r8, 112+PPC_LR_STKOFF(r1) > addi r1, r1, 112 > ld r7, HSTATE_HOST_MSR(r13) > > - cmpwi cr1, r12, BOOK3S_INTERRUPT_MACHINE_CHECK > cmpwi r12, BOOK3S_INTERRUPT_EXTERNAL > beq 11f > cmpwi r12, BOOK3S_INTERRUPT_H_DOORBELL > @@ -163,7 +160,10 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S) > mtmsrd r6, 1 /* Clear RI in MSR */ > mtsrr0 r8 > mtsrr1 r7 > - beq cr1, 13f /* machine check */ > + /* > + * BOOK3S_INTERRUPT_MACHINE_CHECK is handled at the > + * time of guest exit > + */ > RFI > > /* On POWER7, we have external interrupts set to use HSRR0/1 */ > @@ -171,8 +171,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S) > mtspr SPRN_HSRR1, r7 > ba 0x500 > > -13: b machine_check_fwnmi > - > 14: mtspr SPRN_HSRR0, r8 > mtspr SPRN_HSRR1, r7 > b hmi_exception_after_realmode > @@ -2338,15 +2336,13 @@ machine_check_realmode: > ld r9, HSTATE_KVM_VCPU(r13) > li r12, BOOK3S_INTERRUPT_MACHINE_CHECK > /* > - * Deliver unhandled/fatal (e.g. UE) MCE errors to guest through > - * machine check interrupt (set HSRR0 to 0x200). And for handled > - * errors (no-fatal), just go back to guest execution with current > - * HSRR0 instead of exiting guest. This new approach will inject > - * machine check to guest for fatal error causing guest to crash. > - * > - * The old code used to return to host for unhandled errors which > - * was causing guest to hang with soft lockups inside guest and > - * makes it difficult to recover guest instance. > + * Deliver unhandled/fatal (e.g. UE) MCE errors to guest either > + * through machine check interrupt (set HSRR0 to 0x200) or by > + * exiting the guest with KVM_EXIT_NMI exit reason if guest is > + * FWNMI capable. For handled errors (no-fatal), just go back > + * to guest execution with current HSRR0. This new approach > + * injects machine check errors in guest address space to guest > + * enabling guest kernel to suitably handle such errors. > * > * if we receive machine check with MSR(RI=0) then deliver it to > * guest as machine check causing guest to crash. > @@ -2360,7 +2356,12 @@ machine_check_realmode: > cmpdi r3, 0 /* Did we handle MCE ? */ > bne 2f /* Continue guest execution. */ > /* If not, deliver a machine check. SRR0/1 are already set */ > -1: li r10, BOOK3S_INTERRUPT_MACHINE_CHECK > + /* Check if guest is capable of handling NMI exit */ > +1: ld r3, VCPU_KVM(r9) > + lbz r3, KVM_FWNMI(r3) > + cmpdi r3, 1 /* FWNMI capable? */ > + beq mc_cont > + li r10, BOOK3S_INTERRUPT_MACHINE_CHECK > bl kvmppc_msr_interrupt > 2: b fast_interrupt_c_return > > diff --git a/arch/powerpc/platforms/powernv/opal.c b/arch/powerpc/platforms/powernv/opal.c > index 6c9a65b..25749c6 100644 > --- a/arch/powerpc/platforms/powernv/opal.c > +++ b/arch/powerpc/platforms/powernv/opal.c > @@ -446,6 +446,16 @@ int opal_machine_check(struct pt_regs *regs) > } > machine_check_print_event_info(&evt); > > + /* > + * If regs is NULL, then the machine check exception occurred > + * in the guest. Currently no action is performed in the host > + * other than printing the event information. The machine check > + * exception is passed on to the guest kernel and the guest > + * kernel will attempt for recovery. > + */ > + if (!regs) > + return 0; > + > if (opal_recover_mce(regs, &evt)) > return 1; > >
On Mon, Jan 09, 2017 at 05:10:45PM +0530, Aravinda Prasad wrote: > Enhance KVM to cause a guest exit with KVM_EXIT_NMI > exit reason upon a machine check exception (MCE) in > the guest address space if the KVM_CAP_PPC_FWNMI > capability is enabled (instead of delivering a 0x200 > interrupt to guest). This enables QEMU to build error > log and deliver machine check exception to guest via > guest registered machine check handler. > > This approach simplifies the delivery of machine > check exception to guest OS compared to the earlier > approach of KVM directly invoking 0x200 guest interrupt > vector. > > This design/approach is based on the feedback for the > QEMU patches to handle machine check exception. Details > of earlier approach of handling machine check exception > in QEMU and related discussions can be found at: > > https://lists.nongnu.org/archive/html/qemu-devel/2014-11/msg00813.html > > Note: > > This patch introduces a hook which is invoked at the time > of guest exit to facilitate the host-side handling of > machine check exception before the exception is passed > on to the guest. Hence, the host-side handling which was > performed earlier via machine_check_fwnmi is removed. > > The reasons for this approach is (i) it is not possible > to distinguish whether the exception occurred in the > guest or the host from the pt_regs passed on the > machine_check_exception(). Hence machine_check_exception() > calls panic, instead of passing on the exception to > the guest, if the machine check exception is not > recoverable. (ii) the approach introduced in this > patch gives opportunity to the host kernel to perform > actions in virtual mode before passing on the exception > to the guest. This approach does not require complex > tweaks to machine_check_fwnmi and friends. It would be good to qualify the different types of MCE and what action we expect across hypervisor and guest. > > Signed-off-by: Aravinda Prasad <aravinda@linux.vnet.ibm.com> > --- > arch/powerpc/kvm/book3s_hv.c | 27 +++++++++++++----- > arch/powerpc/kvm/book3s_hv_rmhandlers.S | 47 ++++++++++++++++--------------- > arch/powerpc/platforms/powernv/opal.c | 10 +++++++ > 3 files changed, 54 insertions(+), 30 deletions(-) > > diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c > index 3686471..cae4921 100644 > --- a/arch/powerpc/kvm/book3s_hv.c > +++ b/arch/powerpc/kvm/book3s_hv.c > @@ -123,6 +123,7 @@ MODULE_PARM_DESC(halt_poll_ns_shrink, "Factor halt poll time is shrunk by"); > > static void kvmppc_end_cede(struct kvm_vcpu *vcpu); > static int kvmppc_hv_setup_htab_rma(struct kvm_vcpu *vcpu); > +static void kvmppc_machine_check_hook(void); > > static inline struct kvm_vcpu *next_runnable_thread(struct kvmppc_vcore *vc, > int *ip) > @@ -954,15 +955,14 @@ static int kvmppc_handle_exit_hv(struct kvm_run *run, struct kvm_vcpu *vcpu, > r = RESUME_GUEST; > break; > case BOOK3S_INTERRUPT_MACHINE_CHECK: > + /* Exit to guest with KVM_EXIT_NMI as exit reason */ > + run->exit_reason = KVM_EXIT_NMI; > + r = RESUME_HOST; > /* > - * Deliver a machine check interrupt to the guest. > - * We have to do this, even if the host has handled the > - * machine check, because machine checks use SRR0/1 and > - * the interrupt might have trashed guest state in them. > + * Invoke host-kernel handler to perform any host-side > + * handling before exiting the guest. > */ > - kvmppc_book3s_queue_irqprio(vcpu, > - BOOK3S_INTERRUPT_MACHINE_CHECK); > - r = RESUME_GUEST; > + kvmppc_machine_check_hook(); > break; > case BOOK3S_INTERRUPT_PROGRAM: > { > @@ -3491,6 +3491,19 @@ static void kvmppc_irq_bypass_del_producer_hv(struct irq_bypass_consumer *cons, > } > #endif > > +/* > + * Hook to handle machine check exceptions occurred inside a guest. > + * This hook is invoked from host virtual mode from KVM before exiting > + * the guest with KVM_EXIT_NMI exit reason. This gives an opportunity > + * for the host to take action (if any) before passing on the machine > + * check exception to the guest kernel. > + */ > +static void kvmppc_machine_check_hook(void) > +{ > + if (ppc_md.machine_check_exception) > + ppc_md.machine_check_exception(NULL); > +} > + > static long kvm_arch_vm_ioctl_hv(struct file *filp, > unsigned int ioctl, unsigned long arg) > { > diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S > index c3c1d1b..9b41390 100644 > --- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S > +++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S > @@ -134,21 +134,18 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S) > stb r0, HSTATE_HWTHREAD_REQ(r13) > > /* > - * For external and machine check interrupts, we need > - * to call the Linux handler to process the interrupt. > - * We do that by jumping to absolute address 0x500 for > - * external interrupts, or the machine_check_fwnmi label > - * for machine checks (since firmware might have patched > - * the vector area at 0x200). The [h]rfid at the end of the > - * handler will return to the book3s_hv_interrupts.S code. > - * For other interrupts we do the rfid to get back > - * to the book3s_hv_interrupts.S code here. > + * For external interrupts we need to call the Linux > + * handler to process the interrupt. We do that by jumping > + * to absolute address 0x500 for external interrupts. > + * The [h]rfid at the end of the handler will return to > + * the book3s_hv_interrupts.S code. For other interrupts > + * we do the rfid to get back to the book3s_hv_interrupts.S > + * code here. > */ > ld r8, 112+PPC_LR_STKOFF(r1) > addi r1, r1, 112 > ld r7, HSTATE_HOST_MSR(r13) > > - cmpwi cr1, r12, BOOK3S_INTERRUPT_MACHINE_CHECK > cmpwi r12, BOOK3S_INTERRUPT_EXTERNAL > beq 11f > cmpwi r12, BOOK3S_INTERRUPT_H_DOORBELL > @@ -163,7 +160,10 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S) > mtmsrd r6, 1 /* Clear RI in MSR */ > mtsrr0 r8 > mtsrr1 r7 > - beq cr1, 13f /* machine check */ > + /* > + * BOOK3S_INTERRUPT_MACHINE_CHECK is handled at the > + * time of guest exit > + */ > RFI > > /* On POWER7, we have external interrupts set to use HSRR0/1 */ > @@ -171,8 +171,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S) > mtspr SPRN_HSRR1, r7 > ba 0x500 > > -13: b machine_check_fwnmi > - > 14: mtspr SPRN_HSRR0, r8 > mtspr SPRN_HSRR1, r7 > b hmi_exception_after_realmode > @@ -2338,15 +2336,13 @@ machine_check_realmode: > ld r9, HSTATE_KVM_VCPU(r13) > li r12, BOOK3S_INTERRUPT_MACHINE_CHECK > /* > - * Deliver unhandled/fatal (e.g. UE) MCE errors to guest through > - * machine check interrupt (set HSRR0 to 0x200). And for handled > - * errors (no-fatal), just go back to guest execution with current > - * HSRR0 instead of exiting guest. This new approach will inject > - * machine check to guest for fatal error causing guest to crash. > - * > - * The old code used to return to host for unhandled errors which > - * was causing guest to hang with soft lockups inside guest and > - * makes it difficult to recover guest instance. > + * Deliver unhandled/fatal (e.g. UE) MCE errors to guest either > + * through machine check interrupt (set HSRR0 to 0x200) or by > + * exiting the guest with KVM_EXIT_NMI exit reason if guest is > + * FWNMI capable. For handled errors (no-fatal), just go back > + * to guest execution with current HSRR0. This new approach > + * injects machine check errors in guest address space to guest > + * enabling guest kernel to suitably handle such errors. > * > * if we receive machine check with MSR(RI=0) then deliver it to > * guest as machine check causing guest to crash. > @@ -2360,7 +2356,12 @@ machine_check_realmode: > cmpdi r3, 0 /* Did we handle MCE ? */ > bne 2f /* Continue guest execution. */ > /* If not, deliver a machine check. SRR0/1 are already set */ > -1: li r10, BOOK3S_INTERRUPT_MACHINE_CHECK > + /* Check if guest is capable of handling NMI exit */ > +1: ld r3, VCPU_KVM(r9) > + lbz r3, KVM_FWNMI(r3) > + cmpdi r3, 1 /* FWNMI capable? */ > + beq mc_cont > + li r10, BOOK3S_INTERRUPT_MACHINE_CHECK > bl kvmppc_msr_interrupt > 2: b fast_interrupt_c_return > > diff --git a/arch/powerpc/platforms/powernv/opal.c b/arch/powerpc/platforms/powernv/opal.c > index 6c9a65b..25749c6 100644 > --- a/arch/powerpc/platforms/powernv/opal.c > +++ b/arch/powerpc/platforms/powernv/opal.c > @@ -446,6 +446,16 @@ int opal_machine_check(struct pt_regs *regs) > } > machine_check_print_event_info(&evt); > > + /* > + * If regs is NULL, then the machine check exception occurred > + * in the guest. Currently no action is performed in the host > + * other than printing the event information. The machine check > + * exception is passed on to the guest kernel and the guest > + * kernel will attempt for recovery. > + */ > + if (!regs) > + return 0; > + Shouldn't the host take action for example poison bad pages? > if (opal_recover_mce(regs, &evt)) > return 1; > > Balbir Singh -- To unsubscribe from this list: send the line "unsubscribe kvm-ppc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Thursday 12 January 2017 02:35 PM, Balbir Singh wrote: > On Mon, Jan 09, 2017 at 05:10:45PM +0530, Aravinda Prasad wrote: [ . . .] >> The reasons for this approach is (i) it is not possible >> to distinguish whether the exception occurred in the >> guest or the host from the pt_regs passed on the >> machine_check_exception(). Hence machine_check_exception() >> calls panic, instead of passing on the exception to >> the guest, if the machine check exception is not >> recoverable. (ii) the approach introduced in this >> patch gives opportunity to the host kernel to perform >> actions in virtual mode before passing on the exception >> to the guest. This approach does not require complex >> tweaks to machine_check_fwnmi and friends. > > It would be good to qualify the different types of MCE > and what action we expect across hypervisor and guest. The hypervisor performs actions depending on the type of MCE (SLB multihit, UEs, etc). If the hypervisor is unable to recover from the MCE and if the address in error belongs to the guest, then this patch set forwards the error to the guest kernel for handling. The main goal of this patch set is to pass on the unrecoverable MCE errors in the guest address space to the guest kernel, instead of crashing the hypervisor. The action taken by the hypervisor and the guest kernel upon MCE remains unchanged. [ . . . ] > > Shouldn't the host take action for example poison bad pages? > We want to give the guest kernel a chance to recover the clean part of the page before poisoning. As in case of an UE only few bytes of a page are affected. Hence we don't immediately poison the bad pages in the host. It is expected that the guest kernel performs the poisoning of the bad pages after performing recovery action. This prevents the guest from reusing the bad page. However, the missing part is to communicate back to the host when guest is done with the recovery. This is mainly to prevent reuse of bad pages by the host when the guest shutdowns/reboots/crashes/migrates. We are planning to address this part as a separate patch set. Regards, Aravinda >> if (opal_recover_mce(regs, &evt)) >> return 1; >> >> > > Balbir Singh >
diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c index 3686471..cae4921 100644 --- a/arch/powerpc/kvm/book3s_hv.c +++ b/arch/powerpc/kvm/book3s_hv.c @@ -123,6 +123,7 @@ MODULE_PARM_DESC(halt_poll_ns_shrink, "Factor halt poll time is shrunk by"); static void kvmppc_end_cede(struct kvm_vcpu *vcpu); static int kvmppc_hv_setup_htab_rma(struct kvm_vcpu *vcpu); +static void kvmppc_machine_check_hook(void); static inline struct kvm_vcpu *next_runnable_thread(struct kvmppc_vcore *vc, int *ip) @@ -954,15 +955,14 @@ static int kvmppc_handle_exit_hv(struct kvm_run *run, struct kvm_vcpu *vcpu, r = RESUME_GUEST; break; case BOOK3S_INTERRUPT_MACHINE_CHECK: + /* Exit to guest with KVM_EXIT_NMI as exit reason */ + run->exit_reason = KVM_EXIT_NMI; + r = RESUME_HOST; /* - * Deliver a machine check interrupt to the guest. - * We have to do this, even if the host has handled the - * machine check, because machine checks use SRR0/1 and - * the interrupt might have trashed guest state in them. + * Invoke host-kernel handler to perform any host-side + * handling before exiting the guest. */ - kvmppc_book3s_queue_irqprio(vcpu, - BOOK3S_INTERRUPT_MACHINE_CHECK); - r = RESUME_GUEST; + kvmppc_machine_check_hook(); break; case BOOK3S_INTERRUPT_PROGRAM: { @@ -3491,6 +3491,19 @@ static void kvmppc_irq_bypass_del_producer_hv(struct irq_bypass_consumer *cons, } #endif +/* + * Hook to handle machine check exceptions occurred inside a guest. + * This hook is invoked from host virtual mode from KVM before exiting + * the guest with KVM_EXIT_NMI exit reason. This gives an opportunity + * for the host to take action (if any) before passing on the machine + * check exception to the guest kernel. + */ +static void kvmppc_machine_check_hook(void) +{ + if (ppc_md.machine_check_exception) + ppc_md.machine_check_exception(NULL); +} + static long kvm_arch_vm_ioctl_hv(struct file *filp, unsigned int ioctl, unsigned long arg) { diff --git a/arch/powerpc/kvm/book3s_hv_rmhandlers.S b/arch/powerpc/kvm/book3s_hv_rmhandlers.S index c3c1d1b..9b41390 100644 --- a/arch/powerpc/kvm/book3s_hv_rmhandlers.S +++ b/arch/powerpc/kvm/book3s_hv_rmhandlers.S @@ -134,21 +134,18 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S) stb r0, HSTATE_HWTHREAD_REQ(r13) /* - * For external and machine check interrupts, we need - * to call the Linux handler to process the interrupt. - * We do that by jumping to absolute address 0x500 for - * external interrupts, or the machine_check_fwnmi label - * for machine checks (since firmware might have patched - * the vector area at 0x200). The [h]rfid at the end of the - * handler will return to the book3s_hv_interrupts.S code. - * For other interrupts we do the rfid to get back - * to the book3s_hv_interrupts.S code here. + * For external interrupts we need to call the Linux + * handler to process the interrupt. We do that by jumping + * to absolute address 0x500 for external interrupts. + * The [h]rfid at the end of the handler will return to + * the book3s_hv_interrupts.S code. For other interrupts + * we do the rfid to get back to the book3s_hv_interrupts.S + * code here. */ ld r8, 112+PPC_LR_STKOFF(r1) addi r1, r1, 112 ld r7, HSTATE_HOST_MSR(r13) - cmpwi cr1, r12, BOOK3S_INTERRUPT_MACHINE_CHECK cmpwi r12, BOOK3S_INTERRUPT_EXTERNAL beq 11f cmpwi r12, BOOK3S_INTERRUPT_H_DOORBELL @@ -163,7 +160,10 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S) mtmsrd r6, 1 /* Clear RI in MSR */ mtsrr0 r8 mtsrr1 r7 - beq cr1, 13f /* machine check */ + /* + * BOOK3S_INTERRUPT_MACHINE_CHECK is handled at the + * time of guest exit + */ RFI /* On POWER7, we have external interrupts set to use HSRR0/1 */ @@ -171,8 +171,6 @@ END_FTR_SECTION_IFSET(CPU_FTR_ARCH_207S) mtspr SPRN_HSRR1, r7 ba 0x500 -13: b machine_check_fwnmi - 14: mtspr SPRN_HSRR0, r8 mtspr SPRN_HSRR1, r7 b hmi_exception_after_realmode @@ -2338,15 +2336,13 @@ machine_check_realmode: ld r9, HSTATE_KVM_VCPU(r13) li r12, BOOK3S_INTERRUPT_MACHINE_CHECK /* - * Deliver unhandled/fatal (e.g. UE) MCE errors to guest through - * machine check interrupt (set HSRR0 to 0x200). And for handled - * errors (no-fatal), just go back to guest execution with current - * HSRR0 instead of exiting guest. This new approach will inject - * machine check to guest for fatal error causing guest to crash. - * - * The old code used to return to host for unhandled errors which - * was causing guest to hang with soft lockups inside guest and - * makes it difficult to recover guest instance. + * Deliver unhandled/fatal (e.g. UE) MCE errors to guest either + * through machine check interrupt (set HSRR0 to 0x200) or by + * exiting the guest with KVM_EXIT_NMI exit reason if guest is + * FWNMI capable. For handled errors (no-fatal), just go back + * to guest execution with current HSRR0. This new approach + * injects machine check errors in guest address space to guest + * enabling guest kernel to suitably handle such errors. * * if we receive machine check with MSR(RI=0) then deliver it to * guest as machine check causing guest to crash. @@ -2360,7 +2356,12 @@ machine_check_realmode: cmpdi r3, 0 /* Did we handle MCE ? */ bne 2f /* Continue guest execution. */ /* If not, deliver a machine check. SRR0/1 are already set */ -1: li r10, BOOK3S_INTERRUPT_MACHINE_CHECK + /* Check if guest is capable of handling NMI exit */ +1: ld r3, VCPU_KVM(r9) + lbz r3, KVM_FWNMI(r3) + cmpdi r3, 1 /* FWNMI capable? */ + beq mc_cont + li r10, BOOK3S_INTERRUPT_MACHINE_CHECK bl kvmppc_msr_interrupt 2: b fast_interrupt_c_return diff --git a/arch/powerpc/platforms/powernv/opal.c b/arch/powerpc/platforms/powernv/opal.c index 6c9a65b..25749c6 100644 --- a/arch/powerpc/platforms/powernv/opal.c +++ b/arch/powerpc/platforms/powernv/opal.c @@ -446,6 +446,16 @@ int opal_machine_check(struct pt_regs *regs) } machine_check_print_event_info(&evt); + /* + * If regs is NULL, then the machine check exception occurred + * in the guest. Currently no action is performed in the host + * other than printing the event information. The machine check + * exception is passed on to the guest kernel and the guest + * kernel will attempt for recovery. + */ + if (!regs) + return 0; + if (opal_recover_mce(regs, &evt)) return 1;
Enhance KVM to cause a guest exit with KVM_EXIT_NMI exit reason upon a machine check exception (MCE) in the guest address space if the KVM_CAP_PPC_FWNMI capability is enabled (instead of delivering a 0x200 interrupt to guest). This enables QEMU to build error log and deliver machine check exception to guest via guest registered machine check handler. This approach simplifies the delivery of machine check exception to guest OS compared to the earlier approach of KVM directly invoking 0x200 guest interrupt vector. This design/approach is based on the feedback for the QEMU patches to handle machine check exception. Details of earlier approach of handling machine check exception in QEMU and related discussions can be found at: https://lists.nongnu.org/archive/html/qemu-devel/2014-11/msg00813.html Note: This patch introduces a hook which is invoked at the time of guest exit to facilitate the host-side handling of machine check exception before the exception is passed on to the guest. Hence, the host-side handling which was performed earlier via machine_check_fwnmi is removed. The reasons for this approach is (i) it is not possible to distinguish whether the exception occurred in the guest or the host from the pt_regs passed on the machine_check_exception(). Hence machine_check_exception() calls panic, instead of passing on the exception to the guest, if the machine check exception is not recoverable. (ii) the approach introduced in this patch gives opportunity to the host kernel to perform actions in virtual mode before passing on the exception to the guest. This approach does not require complex tweaks to machine_check_fwnmi and friends. Signed-off-by: Aravinda Prasad <aravinda@linux.vnet.ibm.com> --- arch/powerpc/kvm/book3s_hv.c | 27 +++++++++++++----- arch/powerpc/kvm/book3s_hv_rmhandlers.S | 47 ++++++++++++++++--------------- arch/powerpc/platforms/powernv/opal.c | 10 +++++++ 3 files changed, 54 insertions(+), 30 deletions(-) -- To unsubscribe from this list: send the line "unsubscribe kvm-ppc" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html