[v5,4/7] i2c: designware: introducing I2C_SLAVE definitions

- Definitions were added

SLAVE related definitions were added to the core of the controller.

Signed-off-by: Luis Oliveira <lolivei@synopsys.com>
---
Changes V4->V5: (Andy Shevchenko)
- This patch just introduces SLAVE definitions (as suggested in V4)

 drivers/i2c/busses/i2c-designware-core.h | 27 +++++++++++++++++++++++++++
 1 file changed, 27 insertions(+)

On Wed, 2016-12-28 at 14:43 +0000, Luis Oliveira wrote:
> - Definitions were added
> 
> SLAVE related definitions were added to the core of the controller.
> 

Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

> Signed-off-by: Luis Oliveira <lolivei@synopsys.com>
> ---
> Changes V4->V5: (Andy Shevchenko)
> - This patch just introduces SLAVE definitions (as suggested in V4)
> 
>  drivers/i2c/busses/i2c-designware-core.h | 27
> +++++++++++++++++++++++++++
>  1 file changed, 27 insertions(+)
> 
> diff --git a/drivers/i2c/busses/i2c-designware-core.h
> b/drivers/i2c/busses/i2c-designware-core.h
> index 8bba7a37c3ce..5080f1d2d2ec 100644
> --- a/drivers/i2c/busses/i2c-designware-core.h
> +++ b/drivers/i2c/busses/i2c-designware-core.h
> @@ -36,15 +36,20 @@
>  #define DW_IC_CON_SPEED_FAST		0x4
>  #define DW_IC_CON_SPEED_HIGH		0x6
>  #define DW_IC_CON_SPEED_MASK		0x6
> +#define DW_IC_CON_10BITADDR_SLAVE		0x8
>  #define DW_IC_CON_10BITADDR_MASTER	0x10
>  #define DW_IC_CON_RESTART_EN		0x20
>  #define DW_IC_CON_SLAVE_DISABLE		0x40
> +#define DW_IC_CON_STOP_DET_IFADDRESSED		0x80
> +#define DW_IC_CON_TX_EMPTY_CTRL		0x100
> +#define DW_IC_CON_RX_FIFO_FULL_HLD_CTRL		0x200
>  
>  /*
>   * Registers offset
>   */
>  #define DW_IC_CON		0x0
>  #define DW_IC_TAR		0x4
> +#define DW_IC_SAR		0x8
>  #define DW_IC_DATA_CMD		0x10
>  #define DW_IC_SS_SCL_HCNT	0x14
>  #define DW_IC_SS_SCL_LCNT	0x18
> @@ -75,6 +80,7 @@
>  #define DW_IC_SDA_HOLD		0x7c
>  #define DW_IC_TX_ABRT_SOURCE	0x80
>  #define DW_IC_ENABLE_STATUS	0x9c
> +#define DW_IC_CLR_RESTART_DET	0xa8
>  #define DW_IC_COMP_PARAM_1	0xf4
>  #define DW_IC_COMP_VERSION	0xf8
>  #define DW_IC_SDA_HOLD_MIN_VERS	0x3131312A
> @@ -93,15 +99,22 @@
>  #define DW_IC_INTR_STOP_DET	0x200
>  #define DW_IC_INTR_START_DET	0x400
>  #define DW_IC_INTR_GEN_CALL	0x800
> +#define DW_IC_INTR_RESTART_DET	0x1000
>  
>  #define DW_IC_INTR_DEFAULT_MASK		(DW_IC_INTR_RX_FULL |
> \
>  					 DW_IC_INTR_TX_ABRT | \
>  					 DW_IC_INTR_STOP_DET)
>  #define DW_IC_INTR_MASTER_MASK		(DW_IC_INTR_DEFAULT_MAS
> K | \
>  					 DW_IC_INTR_TX_EMPTY)
> +#define DW_IC_INTR_SLAVE_MASK		(DW_IC_INTR_DEFAULT_MASK
> | \
> +					 DW_IC_INTR_RX_DONE | \
> +					 DW_IC_INTR_RX_UNDER | \
> +					 DW_IC_INTR_RD_REQ)
> +
>  #define DW_IC_STATUS_ACTIVITY		0x1
>  #define DW_IC_STATUS_TFE		BIT(2)
>  #define DW_IC_STATUS_MASTER_ACTIVITY	BIT(5)
> +#define DW_IC_STATUS_SLAVE_ACTIVITY	BIT(6)
>  
>  #define DW_IC_SDA_HOLD_RX_SHIFT		16
>  #define DW_IC_SDA_HOLD_RX_MASK		GENMASK(23,
> DW_IC_SDA_HOLD_RX_SHIFT)
> @@ -123,6 +136,12 @@
>  #define TIMEOUT			20 /* ms */
>  
>  /*
> + * operation modes
> + */
> +#define DW_IC_MASTER		0
> +#define DW_IC_SLAVE		1
> +
> +/*
>   * hardware abort codes from the DW_IC_TX_ABRT_SOURCE register
>   *
>   * only expected abort codes are listed here
> @@ -139,6 +158,9 @@
>  #define ABRT_10B_RD_NORSTRT	10
>  #define ABRT_MASTER_DIS		11
>  #define ARB_LOST		12
> +#define ABRT_SLAVE_FLUSH_TXFIFO	13
> +#define ABRT_SLAVE_ARBLOST	14
> +#define ABRT_SLAVE_RD_INTX	15
>  
>  #define DW_IC_TX_ABRT_7B_ADDR_NOACK	(1UL <<
> ABRT_7B_ADDR_NOACK)
>  #define DW_IC_TX_ABRT_10ADDR1_NOACK	(1UL <<
> ABRT_10ADDR1_NOACK)
> @@ -151,6 +173,9 @@
>  #define DW_IC_TX_ABRT_10B_RD_NORSTRT	(1UL <<
> ABRT_10B_RD_NORSTRT)
>  #define DW_IC_TX_ABRT_MASTER_DIS	(1UL << ABRT_MASTER_DIS)
>  #define DW_IC_TX_ARB_LOST		(1UL << ARB_LOST)
> +#define DW_IC_RX_ABRT_SLAVE_RD_INTX	(1UL <<
> ABRT_SLAVE_RD_INTX)
> +#define DW_IC_RX_ABRT_SLAVE_ARBLOST	(1UL <<
> ABRT_SLAVE_ARBLOST)
> +#define DW_IC_RX_ABRT_SLAVE_FLUSH_TXFIFO	(1UL <<
> ABRT_SLAVE_FLUSH_TXFIFO)
>  
>  #define DW_IC_TX_ABRT_NOACK		(DW_IC_TX_ABRT_7B_ADDR_NOA
> CK | \
>  					 DW_IC_TX_ABRT_10ADDR1_NOACK
> | \
> @@ -206,6 +231,7 @@ struct dw_i2c_dev {
>  	void __iomem		*base;
>  	struct completion	cmd_complete;
>  	struct clk		*clk;
> +	struct i2c_client		*slave;
>  	u32			(*get_clk_rate_khz) (struct
> dw_i2c_dev *dev);
>  	struct dw_pci_controller *controller;
>  	int			cmd_err;
> @@ -225,6 +251,7 @@ struct dw_i2c_dev {
>  	struct i2c_adapter	adapter;
>  	u32			functionality;
>  	u32			master_cfg;
> +	u32			slave_cfg;
>  	unsigned int		tx_fifo_depth;
>  	unsigned int		rx_fifo_depth;
>  	int			rx_outstanding;