new file mode 100644
@@ -0,0 +1,51 @@
+* Aspeed Firmware Memory controller
+* Aspeed SPI Flash Memory Controller
+
+The Firmware Memory Controller in the Aspeed AST2500 SoC supports
+three chip selects, two of which are always of SPI type and the third
+can be SPI or NOR type flash. These bindings only describe SPI.
+
+The two SPI flash memory controllers in the AST2500 each support two
+chip selects.
+
+Required properties:
+ - compatible : Should be one of
+ "aspeed,ast2400-fmc" for the AST2400 Firmware Memory Controller
+ "aspeed,ast2400-spi" for the AST2400 SPI Flash memory Controller
+ "aspeed,ast2500-fmc" for the AST2500 Firmware Memory Controller
+ "aspeed,ast2500-spi" for the AST2500 SPI flash memory controllers
+
+ - reg : the first contains the control register location and length,
+ the second contains the memory window mapping address and length
+ - #address-cells : must be 1 corresponding to chip select child binding
+ - #size-cells : must be 0 corresponding to chip select child binding
+
+Optional properties:
+ - interrupts : Should contain the interrupt for the dma device if an
+ FMC
+
+The child nodes are the SPI flash modules which must have a compatible
+property as specified in bindings/mtd/jedec,spi-nor.txt
+
+Optionally, the child node can contain properties for SPI mode (may be
+ignored):
+ - spi-max-frequency - max frequency of spi bus
+
+
+Example:
+fmc: fmc@1e620000 {
+ compatible = "aspeed,ast2500-fmc";
+ reg = < 0x1e620000 0x94
+ 0x20000000 0x02000000 >;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <19>;
+ flash@0 {
+ reg = < 0 >;
+ compatible = "jedec,spi-nor";
+ /* spi-max-frequency = <>; */
+ /* m25p,fast-read; */
+ #address-cells = <1>;
+ #size-cells = <1>;
+ };
+};