@@ -36,6 +36,7 @@ Accelerometers:
- st,lsm303dlm-accel
- st,lsm330-accel
- st,lsm303agr-accel
+- st,lis2dh12-accel
Gyroscopes:
- st,l3g4200d-gyro
@@ -64,7 +64,7 @@ config IIO_ST_ACCEL_3AXIS
help
Say yes here to build support for STMicroelectronics accelerometers:
LSM303DLH, LSM303DLHC, LIS3DH, LSM330D, LSM330DL, LSM330DLC,
- LIS331DLH, LSM303DL, LSM303DLM, LSM330.
+ LIS331DLH, LSM303DL, LSM303DLM, LSM330, LIS2DH12.
This driver can also be built as a module. If so, these modules
will be created:
@@ -27,6 +27,7 @@
#define LSM303DLM_ACCEL_DEV_NAME "lsm303dlm_accel"
#define LSM330_ACCEL_DEV_NAME "lsm330_accel"
#define LSM303AGR_ACCEL_DEV_NAME "lsm303agr_accel"
+#define LIS2DH12_ACCEL_DEV_NAME "lis2dh12_accel"
/**
* struct st_sensors_platform_data - default accel platform data
@@ -232,6 +232,7 @@ static const struct st_sensor_settings st_accel_sensors_settings[] = {
[3] = LSM330DL_ACCEL_DEV_NAME,
[4] = LSM330DLC_ACCEL_DEV_NAME,
[5] = LSM303AGR_ACCEL_DEV_NAME,
+ [6] = LIS2DH12_ACCEL_DEV_NAME,
},
.ch = (struct iio_chan_spec *)st_accel_12bit_channels,
.odr = {
@@ -72,6 +72,10 @@ static const struct of_device_id st_accel_of_match[] = {
.compatible = "st,lsm303agr-accel",
.data = LSM303AGR_ACCEL_DEV_NAME,
},
+ {
+ .compatible = "st,lis2dh12-accel",
+ .data = LIS2DH12_ACCEL_DEV_NAME,
+ },
{},
};
MODULE_DEVICE_TABLE(of, st_accel_of_match);
@@ -121,6 +125,7 @@ static const struct i2c_device_id st_accel_id_table[] = {
{ LSM303DLM_ACCEL_DEV_NAME },
{ LSM330_ACCEL_DEV_NAME },
{ LSM303AGR_ACCEL_DEV_NAME },
+ { LIS2DH12_ACCEL_DEV_NAME },
{},
};
MODULE_DEVICE_TABLE(i2c, st_accel_id_table);
@@ -58,6 +58,7 @@ static const struct spi_device_id st_accel_id_table[] = {
{ LSM303DLM_ACCEL_DEV_NAME },
{ LSM330_ACCEL_DEV_NAME },
{ LSM303AGR_ACCEL_DEV_NAME },
+ { LIS2DH12_ACCEL_DEV_NAME },
{},
};
MODULE_DEVICE_TABLE(spi, st_accel_id_table);