Patchwork [01/10] scsi-disk: Implement rerror option

login
register
mail settings
Submitter Kevin Wolf
Date Nov. 4, 2010, 1:15 p.m.
Message ID <1288876539-8300-2-git-send-email-kwolf@redhat.com>
Download mbox | patch
Permalink /patch/70127/
State New
Headers show

Comments

Kevin Wolf - Nov. 4, 2010, 1:15 p.m.
This implements the rerror option for SCSI disks.

It also includes minor changes to the write path where the same code is used
that was criticized in the review for the changes to the read path required for
rerror support.

Signed-off-by: Kevin Wolf <kwolf@redhat.com>
Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com>
---
 blockdev.c     |    6 ++--
 hw/scsi-disk.c |  100 +++++++++++++++++++++++++++++++++++++-------------------
 2 files changed, 69 insertions(+), 37 deletions(-)

Patch

diff --git a/blockdev.c b/blockdev.c
index ff7602b..6cb179a 100644
--- a/blockdev.c
+++ b/blockdev.c
@@ -314,7 +314,7 @@  DriveInfo *drive_init(QemuOpts *opts, int default_to_scsi, int *fatal_error)
     on_write_error = BLOCK_ERR_STOP_ENOSPC;
     if ((buf = qemu_opt_get(opts, "werror")) != NULL) {
         if (type != IF_IDE && type != IF_SCSI && type != IF_VIRTIO && type != IF_NONE) {
-            fprintf(stderr, "werror is no supported by this format\n");
+            fprintf(stderr, "werror is not supported by this format\n");
             return NULL;
         }
 
@@ -326,8 +326,8 @@  DriveInfo *drive_init(QemuOpts *opts, int default_to_scsi, int *fatal_error)
 
     on_read_error = BLOCK_ERR_REPORT;
     if ((buf = qemu_opt_get(opts, "rerror")) != NULL) {
-        if (type != IF_IDE && type != IF_VIRTIO && type != IF_NONE) {
-            fprintf(stderr, "rerror is no supported by this format\n");
+        if (type != IF_IDE && type != IF_VIRTIO && type != IF_SCSI && type != IF_NONE) {
+            fprintf(stderr, "rerror is not supported by this format\n");
             return NULL;
         }
 
diff --git a/hw/scsi-disk.c b/hw/scsi-disk.c
index 9628b39..43a5b59 100644
--- a/hw/scsi-disk.c
+++ b/hw/scsi-disk.c
@@ -41,7 +41,10 @@  do { fprintf(stderr, "scsi-disk: " fmt , ## __VA_ARGS__); } while (0)
 #define SCSI_DMA_BUF_SIZE    131072
 #define SCSI_MAX_INQUIRY_LEN 256
 
-#define SCSI_REQ_STATUS_RETRY 0x01
+#define SCSI_REQ_STATUS_RETRY           0x01
+#define SCSI_REQ_STATUS_RETRY_TYPE_MASK 0x06
+#define SCSI_REQ_STATUS_RETRY_READ      0x00
+#define SCSI_REQ_STATUS_RETRY_WRITE     0x02
 
 typedef struct SCSIDiskState SCSIDiskState;
 
@@ -70,6 +73,8 @@  struct SCSIDiskState
     char *serial;
 };
 
+static int scsi_handle_rw_error(SCSIDiskReq *r, int error, int type);
+
 static SCSIDiskReq *scsi_new_request(SCSIDiskState *s, uint32_t tag,
         uint32_t lun)
 {
@@ -127,34 +132,30 @@  static void scsi_cancel_io(SCSIDevice *d, uint32_t tag)
 static void scsi_read_complete(void * opaque, int ret)
 {
     SCSIDiskReq *r = (SCSIDiskReq *)opaque;
+    int n;
 
     r->req.aiocb = NULL;
 
     if (ret) {
-        DPRINTF("IO error\n");
-        r->req.bus->complete(r->req.bus, SCSI_REASON_DATA, r->req.tag, 0);
-        scsi_command_complete(r, CHECK_CONDITION, NO_SENSE);
-        return;
+        if (scsi_handle_rw_error(r, -ret, SCSI_REQ_STATUS_RETRY_READ)) {
+            return;
+        }
     }
+
     DPRINTF("Data ready tag=0x%x len=%zd\n", r->req.tag, r->iov.iov_len);
 
+    n = r->iov.iov_len / 512;
+    r->sector += n;
+    r->sector_count -= n;
     r->req.bus->complete(r->req.bus, SCSI_REASON_DATA, r->req.tag, r->iov.iov_len);
 }
 
-/* Read more data from scsi device into buffer.  */
-static void scsi_read_data(SCSIDevice *d, uint32_t tag)
+
+static void scsi_read_request(SCSIDiskReq *r)
 {
-    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, d);
-    SCSIDiskReq *r;
+    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
     uint32_t n;
 
-    r = scsi_find_request(s, tag);
-    if (!r) {
-        BADF("Bad read tag 0x%x\n", tag);
-        /* ??? This is the wrong error.  */
-        scsi_command_complete(r, CHECK_CONDITION, HARDWARE_ERROR);
-        return;
-    }
     if (r->sector_count == (uint32_t)-1) {
         DPRINTF("Read buf_len=%zd\n", r->iov.iov_len);
         r->sector_count = 0;
@@ -177,29 +178,54 @@  static void scsi_read_data(SCSIDevice *d, uint32_t tag)
                               scsi_read_complete, r);
     if (r->req.aiocb == NULL)
         scsi_command_complete(r, CHECK_CONDITION, HARDWARE_ERROR);
-    r->sector += n;
-    r->sector_count -= n;
 }
 
-static int scsi_handle_write_error(SCSIDiskReq *r, int error)
+/* Read more data from scsi device into buffer.  */
+static void scsi_read_data(SCSIDevice *d, uint32_t tag)
 {
+    SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, d);
+    SCSIDiskReq *r;
+
+    r = scsi_find_request(s, tag);
+    if (!r) {
+        BADF("Bad read tag 0x%x\n", tag);
+        /* ??? This is the wrong error.  */
+        scsi_command_complete(r, CHECK_CONDITION, HARDWARE_ERROR);
+        return;
+    }
+
+    /* No data transfer may already be in progress */
+    assert(r->req.aiocb == NULL);
+
+    scsi_read_request(r);
+}
+
+static int scsi_handle_rw_error(SCSIDiskReq *r, int error, int type)
+{
+    int is_read = (type == SCSI_REQ_STATUS_RETRY_READ);
     SCSIDiskState *s = DO_UPCAST(SCSIDiskState, qdev, r->req.dev);
-    BlockErrorAction action = bdrv_get_on_error(s->bs, 0);
+    BlockErrorAction action = bdrv_get_on_error(s->bs, is_read);
 
     if (action == BLOCK_ERR_IGNORE) {
-        bdrv_mon_event(s->bs, BDRV_ACTION_IGNORE, 0);
+        bdrv_mon_event(s->bs, BDRV_ACTION_IGNORE, is_read);
         return 0;
     }
 
     if ((error == ENOSPC && action == BLOCK_ERR_STOP_ENOSPC)
             || action == BLOCK_ERR_STOP_ANY) {
-        r->status |= SCSI_REQ_STATUS_RETRY;
-        bdrv_mon_event(s->bs, BDRV_ACTION_STOP, 0);
+
+        type &= SCSI_REQ_STATUS_RETRY_TYPE_MASK;
+        r->status |= SCSI_REQ_STATUS_RETRY | type;
+
+        bdrv_mon_event(s->bs, BDRV_ACTION_STOP, is_read);
         vm_stop(0);
     } else {
+        if (type == SCSI_REQ_STATUS_RETRY_READ) {
+            r->req.bus->complete(r->req.bus, SCSI_REASON_DATA, r->req.tag, 0);
+        }
         scsi_command_complete(r, CHECK_CONDITION,
                 HARDWARE_ERROR);
-        bdrv_mon_event(s->bs, BDRV_ACTION_REPORT, 0);
+        bdrv_mon_event(s->bs, BDRV_ACTION_REPORT, is_read);
     }
 
     return 1;
@@ -214,8 +240,9 @@  static void scsi_write_complete(void * opaque, int ret)
     r->req.aiocb = NULL;
 
     if (ret) {
-        if (scsi_handle_write_error(r, -ret))
+        if (scsi_handle_rw_error(r, -ret, SCSI_REQ_STATUS_RETRY_WRITE)) {
             return;
+        }
     }
 
     n = r->iov.iov_len / 512;
@@ -268,8 +295,8 @@  static int scsi_write_data(SCSIDevice *d, uint32_t tag)
         return 1;
     }
 
-    if (r->req.aiocb)
-        BADF("Data transfer already in progress\n");
+    /* No data transfer may already be in progress */
+    assert(r->req.aiocb == NULL);
 
     scsi_write_request(r);
 
@@ -288,8 +315,18 @@  static void scsi_dma_restart_bh(void *opaque)
     QTAILQ_FOREACH(req, &s->qdev.requests, next) {
         r = DO_UPCAST(SCSIDiskReq, req, req);
         if (r->status & SCSI_REQ_STATUS_RETRY) {
-            r->status &= ~SCSI_REQ_STATUS_RETRY;
-            scsi_write_request(r); 
+            int status = r->status;
+            r->status &=
+                ~(SCSI_REQ_STATUS_RETRY | SCSI_REQ_STATUS_RETRY_TYPE_MASK);
+
+            switch (status & SCSI_REQ_STATUS_RETRY_TYPE_MASK) {
+            case SCSI_REQ_STATUS_RETRY_READ:
+                scsi_read_request(r);
+                break;
+            case SCSI_REQ_STATUS_RETRY_WRITE:
+                scsi_write_request(r);
+                break;
+            }
         }
     }
 }
@@ -1152,11 +1189,6 @@  static int scsi_disk_initfn(SCSIDevice *dev)
         return -1;
     }
 
-    if (bdrv_get_on_error(s->bs, 1) != BLOCK_ERR_REPORT) {
-        error_report("Device doesn't support drive option rerror");
-        return -1;
-    }
-
     if (!s->serial) {
         /* try to fall back to value set with legacy -drive serial=... */
         dinfo = drive_get_by_blockdev(s->bs);