Message ID | 1480492051-10884-1-git-send-email-meng.yi@nxp.com |
---|---|
State | Accepted |
Commit | 8f3a8428c96cb8424afea68f86df83a4e07d63ff |
Delegated to: | Simon Glass |
Headers | show |
On Wed, Nov 30, 2016 at 5:47 AM, Meng Yi <meng.yi@nxp.com> wrote: > + /* write register's data */ > + if (dm_i2c_write(dev, PCF2127_REG_CTRL1, buf, sizeof(buf)) < 0) > + return -1; Please propagate the error properly: ret = dm_i2c_write(dev, PCF2127_REG_CTRL1, buf, sizeof(buf)); if (ret) return ret; Same applies in the other places.
Hi Meng, On 30 November 2016 at 00:47, Meng Yi <meng.yi@nxp.com> wrote: > This driver compatible with pcf2127 and pcf2129 > > Signed-off-by: Meng Yi <meng.yi@nxp.com> > --- > change in V2: > -convert to using u-boot driver module > --- > drivers/rtc/Kconfig | 6 +++ > drivers/rtc/Makefile | 1 + > drivers/rtc/pcf2127.c | 107 ++++++++++++++++++++++++++++++++++++++++++++++++++ > 3 files changed, 114 insertions(+) > create mode 100644 drivers/rtc/pcf2127.c > Reviewed-by: Simon Glass <sjg@chromium.org> Nits below > diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig > index b5d9048..57af1b5 100644 > --- a/drivers/rtc/Kconfig > +++ b/drivers/rtc/Kconfig > @@ -13,4 +13,10 @@ config DM_RTC > drivers to perform the actual functions. See rtc.h for a > description of the API. > > +config RTC_PCF2127 > + bool "Enable PCF2127 driver" > + depends on DM_RTC > + help > + Enable pcf2127 driver which provides rtc get and set function Please list the manufacturer and explain briefly what features it has (rtc, non-volatile ram, battery backup...?) > + > endmenu > diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile > index fc38a3f..c919427 100644 > --- a/drivers/rtc/Makefile > +++ b/drivers/rtc/Makefile > @@ -45,6 +45,7 @@ obj-$(CONFIG_RTC_MV) += mvrtc.o > obj-$(CONFIG_RTC_MX27) += mx27rtc.o > obj-$(CONFIG_RTC_MXS) += mxsrtc.o > obj-$(CONFIG_RTC_PCF8563) += pcf8563.o > +obj-$(CONFIG_RTC_PCF2127) += pcf2127.o > obj-$(CONFIG_RTC_PL031) += pl031.o > obj-$(CONFIG_RTC_PT7C4338) += pt7c4338.o > obj-$(CONFIG_RTC_RS5C372A) += rs5c372.o > diff --git a/drivers/rtc/pcf2127.c b/drivers/rtc/pcf2127.c > new file mode 100644 > index 0000000..bc59c6c > --- /dev/null > +++ b/drivers/rtc/pcf2127.c > @@ -0,0 +1,107 @@ > +/* > + * Copyright (C) 2016 by NXP Semiconductors Inc. > + * Date & Time support for PCF2127 RTC > + */ > + > +/* #define DEBUG */ > + > +#include <common.h> > +#include <command.h> > +#include <dm.h> > +#include <i2c.h> > +#include <rtc.h> > + > +#define PCF2127_REG_CTRL1 (0x00) Please drop the () around these > +#define PCF2127_REG_CTRL2 (0x01) > +#define PCF2127_REG_CTRL3 (0x02) > +#define PCF2127_REG_SC (0x03) /* datetime */ > +#define PCF2127_REG_MN (0x04) > +#define PCF2127_REG_HR (0x05) > +#define PCF2127_REG_DM (0x06) > +#define PCF2127_REG_DW (0x07) > +#define PCF2127_REG_MO (0x08) > +#define PCF2127_REG_YR (0x09) > + > +static int pcf2127_rtc_set(struct udevice *dev, const struct rtc_time *tm) > +{ > + uchar buf[8]; > + int i = 0; > + > + /* start register address */ > + buf[i++] = PCF2127_REG_SC; > + > + /* hours, minutes and seconds */ > + buf[i++] = bin2bcd(tm->tm_sec); > + buf[i++] = bin2bcd(tm->tm_min); > + buf[i++] = bin2bcd(tm->tm_hour); > + buf[i++] = bin2bcd(tm->tm_mday); > + buf[i++] = tm->tm_wday & 0x07; > + > + /* month, 1 - 12 */ > + buf[i++] = bin2bcd(tm->tm_mon + 1); > + > + /* year */ > + buf[i++] = bin2bcd(tm->tm_year % 100); > + > + /* write register's data */ > + if (dm_i2c_write(dev, PCF2127_REG_CTRL1, buf, sizeof(buf)) < 0) > + return -1; You should return the value you get from dm_i2c_write() > + > + return 0; > +} > + > +static int pcf2127_rtc_get(struct udevice *dev, struct rtc_time *tm) > +{ > + int rel = 0; > + uchar buf[10] = { PCF2127_REG_CTRL1 }; > + > + if (dm_i2c_write(dev, PCF2127_REG_CTRL1, buf, 1) < 0) > + return -1; Same for these > + if (dm_i2c_read(dev, PCF2127_REG_CTRL1, buf, sizeof(buf)) < 0) > + return -1; > + > + if (buf[PCF2127_REG_CTRL3] & 0x04) > + puts("### Warning: RTC Low Voltage - date/time not reliable\n"); > + > + tm->tm_sec = bcd2bin(buf[PCF2127_REG_SC] & 0x7F); > + tm->tm_min = bcd2bin(buf[PCF2127_REG_MN] & 0x7F); > + tm->tm_hour = bcd2bin(buf[PCF2127_REG_HR] & 0x3F); > + tm->tm_mday = bcd2bin(buf[PCF2127_REG_DM] & 0x3F); > + tm->tm_mon = bcd2bin(buf[PCF2127_REG_MO] & 0x1F) - 1; > + tm->tm_year = bcd2bin(buf[PCF2127_REG_YR]) + 1900; > + if (tm->tm_year < 1970) > + tm->tm_year += 100; /* assume we are in 1970...2069 */ > + tm->tm_wday = buf[PCF2127_REG_DW] & 0x07; > + tm->tm_yday = 0; > + tm->tm_isdst = 0; > + > + debug("Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n", > + tm->tm_year, tm->tm_mon, tm->tm_mday, tm->tm_wday, > + tm->tm_hour, tm->tm_min, tm->tm_sec); > + > + return rel; > +} > + > +static int pcf2127_rtc_reset(struct udevice *dev) > +{ > + /*Doing nothing here*/ /* Doing nothing here */ blank line here (before 'return') > + return 0; > +} > + > +static const struct rtc_ops pcf2127_rtc_ops = { > + .get = pcf2127_rtc_get, > + .set = pcf2127_rtc_set, > + .reset = pcf2127_rtc_reset, > +}; > + > +static const struct udevice_id pcf2127_rtc_ids[] = { > + { .compatible = "pcf2127-rtc" }, > + { } > +}; > + > +U_BOOT_DRIVER(rtc_pcf2127) = { > + .name = "rtc-pcf2127", > + .id = UCLASS_RTC, > + .of_match = pcf2127_rtc_ids, > + .ops = &pcf2127_rtc_ops, > +}; > -- > 2.1.0.27.g96db324 > Regards, Simon
diff --git a/drivers/rtc/Kconfig b/drivers/rtc/Kconfig index b5d9048..57af1b5 100644 --- a/drivers/rtc/Kconfig +++ b/drivers/rtc/Kconfig @@ -13,4 +13,10 @@ config DM_RTC drivers to perform the actual functions. See rtc.h for a description of the API. +config RTC_PCF2127 + bool "Enable PCF2127 driver" + depends on DM_RTC + help + Enable pcf2127 driver which provides rtc get and set function + endmenu diff --git a/drivers/rtc/Makefile b/drivers/rtc/Makefile index fc38a3f..c919427 100644 --- a/drivers/rtc/Makefile +++ b/drivers/rtc/Makefile @@ -45,6 +45,7 @@ obj-$(CONFIG_RTC_MV) += mvrtc.o obj-$(CONFIG_RTC_MX27) += mx27rtc.o obj-$(CONFIG_RTC_MXS) += mxsrtc.o obj-$(CONFIG_RTC_PCF8563) += pcf8563.o +obj-$(CONFIG_RTC_PCF2127) += pcf2127.o obj-$(CONFIG_RTC_PL031) += pl031.o obj-$(CONFIG_RTC_PT7C4338) += pt7c4338.o obj-$(CONFIG_RTC_RS5C372A) += rs5c372.o diff --git a/drivers/rtc/pcf2127.c b/drivers/rtc/pcf2127.c new file mode 100644 index 0000000..bc59c6c --- /dev/null +++ b/drivers/rtc/pcf2127.c @@ -0,0 +1,107 @@ +/* + * Copyright (C) 2016 by NXP Semiconductors Inc. + * Date & Time support for PCF2127 RTC + */ + +/* #define DEBUG */ + +#include <common.h> +#include <command.h> +#include <dm.h> +#include <i2c.h> +#include <rtc.h> + +#define PCF2127_REG_CTRL1 (0x00) +#define PCF2127_REG_CTRL2 (0x01) +#define PCF2127_REG_CTRL3 (0x02) +#define PCF2127_REG_SC (0x03) /* datetime */ +#define PCF2127_REG_MN (0x04) +#define PCF2127_REG_HR (0x05) +#define PCF2127_REG_DM (0x06) +#define PCF2127_REG_DW (0x07) +#define PCF2127_REG_MO (0x08) +#define PCF2127_REG_YR (0x09) + +static int pcf2127_rtc_set(struct udevice *dev, const struct rtc_time *tm) +{ + uchar buf[8]; + int i = 0; + + /* start register address */ + buf[i++] = PCF2127_REG_SC; + + /* hours, minutes and seconds */ + buf[i++] = bin2bcd(tm->tm_sec); + buf[i++] = bin2bcd(tm->tm_min); + buf[i++] = bin2bcd(tm->tm_hour); + buf[i++] = bin2bcd(tm->tm_mday); + buf[i++] = tm->tm_wday & 0x07; + + /* month, 1 - 12 */ + buf[i++] = bin2bcd(tm->tm_mon + 1); + + /* year */ + buf[i++] = bin2bcd(tm->tm_year % 100); + + /* write register's data */ + if (dm_i2c_write(dev, PCF2127_REG_CTRL1, buf, sizeof(buf)) < 0) + return -1; + + return 0; +} + +static int pcf2127_rtc_get(struct udevice *dev, struct rtc_time *tm) +{ + int rel = 0; + uchar buf[10] = { PCF2127_REG_CTRL1 }; + + if (dm_i2c_write(dev, PCF2127_REG_CTRL1, buf, 1) < 0) + return -1; + if (dm_i2c_read(dev, PCF2127_REG_CTRL1, buf, sizeof(buf)) < 0) + return -1; + + if (buf[PCF2127_REG_CTRL3] & 0x04) + puts("### Warning: RTC Low Voltage - date/time not reliable\n"); + + tm->tm_sec = bcd2bin(buf[PCF2127_REG_SC] & 0x7F); + tm->tm_min = bcd2bin(buf[PCF2127_REG_MN] & 0x7F); + tm->tm_hour = bcd2bin(buf[PCF2127_REG_HR] & 0x3F); + tm->tm_mday = bcd2bin(buf[PCF2127_REG_DM] & 0x3F); + tm->tm_mon = bcd2bin(buf[PCF2127_REG_MO] & 0x1F) - 1; + tm->tm_year = bcd2bin(buf[PCF2127_REG_YR]) + 1900; + if (tm->tm_year < 1970) + tm->tm_year += 100; /* assume we are in 1970...2069 */ + tm->tm_wday = buf[PCF2127_REG_DW] & 0x07; + tm->tm_yday = 0; + tm->tm_isdst = 0; + + debug("Get DATE: %4d-%02d-%02d (wday=%d) TIME: %2d:%02d:%02d\n", + tm->tm_year, tm->tm_mon, tm->tm_mday, tm->tm_wday, + tm->tm_hour, tm->tm_min, tm->tm_sec); + + return rel; +} + +static int pcf2127_rtc_reset(struct udevice *dev) +{ + /*Doing nothing here*/ + return 0; +} + +static const struct rtc_ops pcf2127_rtc_ops = { + .get = pcf2127_rtc_get, + .set = pcf2127_rtc_set, + .reset = pcf2127_rtc_reset, +}; + +static const struct udevice_id pcf2127_rtc_ids[] = { + { .compatible = "pcf2127-rtc" }, + { } +}; + +U_BOOT_DRIVER(rtc_pcf2127) = { + .name = "rtc-pcf2127", + .id = UCLASS_RTC, + .of_match = pcf2127_rtc_ids, + .ops = &pcf2127_rtc_ops, +};
This driver compatible with pcf2127 and pcf2129 Signed-off-by: Meng Yi <meng.yi@nxp.com> --- change in V2: -convert to using u-boot driver module --- drivers/rtc/Kconfig | 6 +++ drivers/rtc/Makefile | 1 + drivers/rtc/pcf2127.c | 107 ++++++++++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 114 insertions(+) create mode 100644 drivers/rtc/pcf2127.c