diff mbox

[v3,1/1] pkg-autotools: generic configure fix for powerpc64

Message ID 1d653a47bcc91167e4ff1782e889a8229119fc3b.1480309892.git.sam.bobroff@au1.ibm.com
State Accepted
Headers show

Commit Message

Sam Bobroff Nov. 28, 2016, 5:11 a.m. UTC
Many (100+) packages supported by buildroot contain old configure
scripts (or build them from old versions of autotools) that are unable
to determine how to link shared libraries on powerpc64 and
powerpc64le. This causes that test to erroneously fail on toolchains
that are not "bi-endian" (which is the case for toolchains built by
buildroot), which causes configure to build static libraries instead
of dynamic ones. Although these builds succeed, they tend to cause
linker failures in binaries later linked against them.

Because affected configure files can be discovered automatically, this
patch introduces a hook (enabled only when building for powerpc64 and
powerpc64le) that uses a script to scan and fix each package.

Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
---

v3:

Followed suggestions from Arnout Vandecappelle:
* simplify test.
* double-$ variables.

v2:

* Patch host packages as well as target ones. (Feedback on the GNU Make code to
  detect this is welcome.)
* Folded long line in script.
* Removed patch backup files.
* Updated diff to unified format.
* Changed $pkg variable to $srcdir.

 package/pkg-autotools.mk                   | 16 ++++++++++
 support/scripts/fix-configure-powerpc64.sh | 47 ++++++++++++++++++++++++++++++
 2 files changed, 63 insertions(+)
 create mode 100755 support/scripts/fix-configure-powerpc64.sh

Comments

Arnout Vandecappelle Nov. 29, 2016, 11:50 p.m. UTC | #1
On 28-11-16 06:11, Sam Bobroff wrote:
> Many (100+) packages supported by buildroot contain old configure
> scripts (or build them from old versions of autotools) that are unable
> to determine how to link shared libraries on powerpc64 and
> powerpc64le. This causes that test to erroneously fail on toolchains
> that are not "bi-endian" (which is the case for toolchains built by
> buildroot), which causes configure to build static libraries instead
> of dynamic ones. Although these builds succeed, they tend to cause
> linker failures in binaries later linked against them.
> 
> Because affected configure files can be discovered automatically, this
> patch introduces a hook (enabled only when building for powerpc64 and
> powerpc64le) that uses a script to scan and fix each package.
> 
> Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>

Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>

 However, this may be a little risky to still include in the release. I guess
all these packages already have been broken for a long time, no? So not really a
regression.


 Regards,
 Arnout

> ---
> 
> v3:
> 
> Followed suggestions from Arnout Vandecappelle:
> * simplify test.
> * double-$ variables.
> 
> v2:
> 
> * Patch host packages as well as target ones. (Feedback on the GNU Make code to
>   detect this is welcome.)
> * Folded long line in script.
> * Removed patch backup files.
> * Updated diff to unified format.
> * Changed $pkg variable to $srcdir.
> 
>  package/pkg-autotools.mk                   | 16 ++++++++++
>  support/scripts/fix-configure-powerpc64.sh | 47 ++++++++++++++++++++++++++++++
>  2 files changed, 63 insertions(+)
>  create mode 100755 support/scripts/fix-configure-powerpc64.sh
> 
> diff --git a/package/pkg-autotools.mk b/package/pkg-autotools.mk
> index d1cdb89..00822e2 100644
> --- a/package/pkg-autotools.mk
> +++ b/package/pkg-autotools.mk
> @@ -79,6 +79,15 @@ define LIBTOOL_PATCH_HOOK
>  endef
>  
>  #
> +# Hook to patch common issue with configure on powerpc64{,le} failing
> +# to detect shared library support:
> +#
> +define CONFIGURE_FIX_POWERPC64_HOOK
> +	@$(call MESSAGE,"Checking configure (powerpc64/powerpc64le)")
> +	support/scripts/fix-configure-powerpc64.sh $($(PKG)_DIR)
> +endef
> +
> +#
>  # Hook to gettextize the package if needed
>  #
>  define GETTEXTIZE_HOOK
> @@ -255,6 +264,13 @@ endif
>  
>  endif
>  
> +# Append a configure hook if building for a powerpc64 (or powerpc64le) arch.
> +# Must be added after other pre-configure hooks that might regenerate the
> +# configure script and overwrite the changes made here.
> +ifneq ($$(filter powerpc64%,$$(if $$(filter target,$(4)),$$(ARCH),$$(HOSTARCH))),)
> +$(2)_PRE_CONFIGURE_HOOKS += CONFIGURE_FIX_POWERPC64_HOOK
> +endif
> +
>  #
>  # Build step. Only define it if not already defined by the package .mk
>  # file.
> diff --git a/support/scripts/fix-configure-powerpc64.sh b/support/scripts/fix-configure-powerpc64.sh
> new file mode 100755
> index 0000000..ad71042
> --- /dev/null
> +++ b/support/scripts/fix-configure-powerpc64.sh
> @@ -0,0 +1,47 @@
> +#!/bin/bash
> +
> +# This is a script to find, and correct, a problem with old versions of
> +# configure that affect powerpc64 and powerpc64le.
> +
> +# The issue causes configure to incorrectly determine that shared library
> +# support is not present in the linker. This causes the package to build a
> +# static library rather than a dynamic one and although the build will succeed,
> +# it may cause packages that link with the static library it to fail due to
> +# undefined symbols.
> +
> +# This script searches for files named 'configure' that appear to have this
> +# issue (by searching for a known bad pattern) and patching them.
> +
> +set -e
> +
> +if [ $# -ne 1 ]; then
> +	echo "Usage: $0 <package build directory>"
> +	exit 2
> +fi
> +
> +srcdir="$1"
> +files=$(cd "$srcdir" && find . -name configure \
> +-exec grep -qF 'Generated by GNU Autoconf' {} \; \
> +-exec grep -qF 'ppc*-*linux*|powerpc*-*linux*)' {} \; -print)
> +
> +# --ignore-whitespace is needed because some packages have included
> +# copies of configure scripts where tabs have been replaced with spaces.
> +for c in $files; do
> +	patch --ignore-whitespace "$srcdir"/"$c" <<'EOF'
> +--- a/configure	2016-11-16 15:31:46.097447271 +1100
> ++++ b/configure	2008-07-21 12:17:23.000000000 +1000
> +@@ -4433,7 +4433,10 @@
> +         x86_64-*linux*)
> +           LD="${LD-ld} -m elf_x86_64"
> +           ;;
> +-        ppc*-*linux*|powerpc*-*linux*)
> ++	  powerpcle-*linux*)
> ++	    LD="${LD-ld} -m elf64lppc"
> ++	    ;;
> ++	  powerpc-*linux*)
> +           LD="${LD-ld} -m elf64ppc"
> +           ;;
> +         s390*-*linux*)
> +EOF
> +done
> +
>
Thomas Petazzoni Dec. 5, 2016, 9:55 p.m. UTC | #2
Hello,

On Mon, 28 Nov 2016 16:11:39 +1100, Sam Bobroff wrote:
> Many (100+) packages supported by buildroot contain old configure
> scripts (or build them from old versions of autotools) that are unable
> to determine how to link shared libraries on powerpc64 and
> powerpc64le. This causes that test to erroneously fail on toolchains
> that are not "bi-endian" (which is the case for toolchains built by
> buildroot), which causes configure to build static libraries instead
> of dynamic ones. Although these builds succeed, they tend to cause
> linker failures in binaries later linked against them.
> 
> Because affected configure files can be discovered automatically, this
> patch introduces a hook (enabled only when building for powerpc64 and
> powerpc64le) that uses a script to scan and fix each package.
> 
> Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
> ---

Applied to master, thanks.

Thomas
diff mbox

Patch

diff --git a/package/pkg-autotools.mk b/package/pkg-autotools.mk
index d1cdb89..00822e2 100644
--- a/package/pkg-autotools.mk
+++ b/package/pkg-autotools.mk
@@ -79,6 +79,15 @@  define LIBTOOL_PATCH_HOOK
 endef
 
 #
+# Hook to patch common issue with configure on powerpc64{,le} failing
+# to detect shared library support:
+#
+define CONFIGURE_FIX_POWERPC64_HOOK
+	@$(call MESSAGE,"Checking configure (powerpc64/powerpc64le)")
+	support/scripts/fix-configure-powerpc64.sh $($(PKG)_DIR)
+endef
+
+#
 # Hook to gettextize the package if needed
 #
 define GETTEXTIZE_HOOK
@@ -255,6 +264,13 @@  endif
 
 endif
 
+# Append a configure hook if building for a powerpc64 (or powerpc64le) arch.
+# Must be added after other pre-configure hooks that might regenerate the
+# configure script and overwrite the changes made here.
+ifneq ($$(filter powerpc64%,$$(if $$(filter target,$(4)),$$(ARCH),$$(HOSTARCH))),)
+$(2)_PRE_CONFIGURE_HOOKS += CONFIGURE_FIX_POWERPC64_HOOK
+endif
+
 #
 # Build step. Only define it if not already defined by the package .mk
 # file.
diff --git a/support/scripts/fix-configure-powerpc64.sh b/support/scripts/fix-configure-powerpc64.sh
new file mode 100755
index 0000000..ad71042
--- /dev/null
+++ b/support/scripts/fix-configure-powerpc64.sh
@@ -0,0 +1,47 @@ 
+#!/bin/bash
+
+# This is a script to find, and correct, a problem with old versions of
+# configure that affect powerpc64 and powerpc64le.
+
+# The issue causes configure to incorrectly determine that shared library
+# support is not present in the linker. This causes the package to build a
+# static library rather than a dynamic one and although the build will succeed,
+# it may cause packages that link with the static library it to fail due to
+# undefined symbols.
+
+# This script searches for files named 'configure' that appear to have this
+# issue (by searching for a known bad pattern) and patching them.
+
+set -e
+
+if [ $# -ne 1 ]; then
+	echo "Usage: $0 <package build directory>"
+	exit 2
+fi
+
+srcdir="$1"
+files=$(cd "$srcdir" && find . -name configure \
+-exec grep -qF 'Generated by GNU Autoconf' {} \; \
+-exec grep -qF 'ppc*-*linux*|powerpc*-*linux*)' {} \; -print)
+
+# --ignore-whitespace is needed because some packages have included
+# copies of configure scripts where tabs have been replaced with spaces.
+for c in $files; do
+	patch --ignore-whitespace "$srcdir"/"$c" <<'EOF'
+--- a/configure	2016-11-16 15:31:46.097447271 +1100
++++ b/configure	2008-07-21 12:17:23.000000000 +1000
+@@ -4433,7 +4433,10 @@
+         x86_64-*linux*)
+           LD="${LD-ld} -m elf_x86_64"
+           ;;
+-        ppc*-*linux*|powerpc*-*linux*)
++	  powerpcle-*linux*)
++	    LD="${LD-ld} -m elf64lppc"
++	    ;;
++	  powerpc-*linux*)
+           LD="${LD-ld} -m elf64ppc"
+           ;;
+         s390*-*linux*)
+EOF
+done
+