diff mbox

[U-Boot,7/9] board: ti: am57xx: Add support for the am571x idk

Message ID 20161125054426.20635-8-lokeshvutla@ti.com
State Accepted
Delegated to: Tom Rini
Headers show

Commit Message

Lokesh Vutla Nov. 25, 2016, 5:44 a.m. UTC 
From: Steve Kipisz <s-kipisz2@ti.com>

The AM571x Industrial Development Kit (IDK) is a board based on TI's
AM571x SoC which has a single core 1.5GHz Cortex-A15processor. This
board is a development platform for the Industrial Market with:

- 1GB of DDR3L
- Dual 1Gbps Ethernet
- HDMI
- PRU-ICSS
- uSD
- 16GB eMMC
- CAN
- RS-485
- PCIe
- USB3.0
- Video Input Port
- Industrial IO port and expansion connector

The PRU/ICSS will be supported by 3rd party software for EtherCat,
Profibus, and other Industrial protocols.

The link to the data sheet and TRM can be found here:
http://www.ti.com/product/AM5718

Signed-off-by: Steve Kipisz <s-kipisz2@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
---
 board/ti/am57xx/board.c           |  24 +++-
 board/ti/am57xx/mux_data.h        | 263 ++++++++++++++++++++++++++++++++++++++
 include/configs/ti_omap5_common.h |   2 +
 3 files changed, 286 insertions(+), 3 deletions(-)

Comments

Tom Rini Nov. 26, 2016, 4:14 p.m. UTC | #1 
On Fri, Nov 25, 2016 at 11:14:24AM +0530, Lokesh Vutla wrote:

> From: Steve Kipisz <s-kipisz2@ti.com>
> 
> The AM571x Industrial Development Kit (IDK) is a board based on TI's
> AM571x SoC which has a single core 1.5GHz Cortex-A15processor. This
> board is a development platform for the Industrial Market with:
> 
> - 1GB of DDR3L
> - Dual 1Gbps Ethernet
> - HDMI
> - PRU-ICSS
> - uSD
> - 16GB eMMC
> - CAN
> - RS-485
> - PCIe
> - USB3.0
> - Video Input Port
> - Industrial IO port and expansion connector
> 
> The PRU/ICSS will be supported by 3rd party software for EtherCat,
> Profibus, and other Industrial protocols.
> 
> The link to the data sheet and TRM can be found here:
> http://www.ti.com/product/AM5718
> 
> Signed-off-by: Steve Kipisz <s-kipisz2@ti.com>
> Signed-off-by: Nishanth Menon <nm@ti.com>
> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>

Reviewed-by: Tom Rini <trini@konsulko.com>
Tom Rini Dec. 4, 2016, 11:39 p.m. UTC | #2 
On Fri, Nov 25, 2016 at 11:14:24AM +0530, Lokesh Vutla wrote:

> From: Steve Kipisz <s-kipisz2@ti.com>
> 
> The AM571x Industrial Development Kit (IDK) is a board based on TI's
> AM571x SoC which has a single core 1.5GHz Cortex-A15processor. This
> board is a development platform for the Industrial Market with:
> 
> - 1GB of DDR3L
> - Dual 1Gbps Ethernet
> - HDMI
> - PRU-ICSS
> - uSD
> - 16GB eMMC
> - CAN
> - RS-485
> - PCIe
> - USB3.0
> - Video Input Port
> - Industrial IO port and expansion connector
> 
> The PRU/ICSS will be supported by 3rd party software for EtherCat,
> Profibus, and other Industrial protocols.
> 
> The link to the data sheet and TRM can be found here:
> http://www.ti.com/product/AM5718
> 
> Signed-off-by: Steve Kipisz <s-kipisz2@ti.com>
> Signed-off-by: Nishanth Menon <nm@ti.com>
> Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com>
> Reviewed-by: Tom Rini <trini@konsulko.com>

Applied to u-boot/master, thanks!
diff mbox

Patch

diff --git a/board/ti/am57xx/board.c b/board/ti/am57xx/board.c
index f6a4314..a4bb117 100644
--- a/board/ti/am57xx/board.c
+++ b/board/ti/am57xx/board.c
@@ -42,6 +42,7 @@ 
 				(board_ti_is("AM572PM_") && \
 				 (strncmp("A.30", board_ti_get_rev(), 3) <= 0))
 #define board_is_am572x_idk()	board_ti_is("AM572IDK")
+#define board_is_am571x_idk()	board_ti_is("AM571IDK")
 
 #ifdef CONFIG_DRIVER_TI_CPSW
 #include <cpsw.h>
@@ -63,9 +64,17 @@  static const struct dmm_lisa_map_regs beagle_x15_lisa_regs = {
 	.is_ma_present  = 0x1
 };
 
+static const struct dmm_lisa_map_regs am571x_idk_lisa_regs = {
+	.dmm_lisa_map_3 = 0x80640100,
+	.is_ma_present  = 0x1
+};
+
 void emif_get_dmm_regs(const struct dmm_lisa_map_regs **dmm_lisa_regs)
 {
-	*dmm_lisa_regs = &beagle_x15_lisa_regs;
+	if (board_is_am571x_idk())
+		*dmm_lisa_regs = &am571x_idk_lisa_regs;
+	else
+		*dmm_lisa_regs = &beagle_x15_lisa_regs;
 }
 
 static const struct emif_regs beagle_x15_emif1_ddr3_532mhz_emif_regs = {
@@ -379,6 +388,8 @@  void do_board_detect(void)
 		bname = "AM572x EVM";
 	else if (board_is_am572x_idk())
 		bname = "AM572x IDK";
+	else if (board_is_am571x_idk())
+		bname = "AM571x IDK";
 
 	if (bname)
 		snprintf(sysinfo.board_string, SYSINFO_BOARD_NAME_MAX_LEN,
@@ -407,6 +418,8 @@  static void setup_board_eeprom_env(void)
 			name = "am57xx_evm";
 	} else if (board_is_am572x_idk()) {
 		name = "am572x_idk";
+	} else if (board_is_am571x_idk()) {
+		name = "am571x_idk";
 	} else {
 		printf("Unidentified board claims %s in eeprom header\n",
 		       board_ti_get_name());
@@ -472,6 +485,11 @@  void recalibrate_iodelay(void)
 		pconf_sz = ARRAY_SIZE(core_padconf_array_essential_am572x_idk);
 		iod = iodelay_cfg_array_am572x_idk;
 		iod_sz = ARRAY_SIZE(iodelay_cfg_array_am572x_idk);
+	} else if (board_is_am571x_idk()) {
+		pconf = core_padconf_array_essential_am571x_idk;
+		pconf_sz = ARRAY_SIZE(core_padconf_array_essential_am571x_idk);
+		iod = iodelay_cfg_array_am571x_idk;
+		iod_sz = ARRAY_SIZE(iodelay_cfg_array_am571x_idk);
 	} else {
 		/* Common for X15/GPEVM */
 		pconf = core_padconf_array_essential_x15;
@@ -749,8 +767,8 @@  int board_eth_init(bd_t *bis)
 	ctrl_val |= 0x22;
 	writel(ctrl_val, (*ctrl)->control_core_control_io1);
 
-	/* The phy address for the AM572x IDK are different than x15 */
-	if (board_is_am572x_idk()) {
+	/* The phy address for the AM57xx IDK are different than x15 */
+	if (board_is_am572x_idk() || board_is_am571x_idk()) {
 		cpsw_data.slave_data[0].phy_addr = 0;
 		cpsw_data.slave_data[1].phy_addr = 1;
 	}
diff --git a/board/ti/am57xx/mux_data.h b/board/ti/am57xx/mux_data.h
index d612ec2..2f5243e 100644
--- a/board/ti/am57xx/mux_data.h
+++ b/board/ti/am57xx/mux_data.h
@@ -501,6 +501,232 @@  const struct pad_conf_entry core_padconf_array_essential_am572x_idk[] = {
 	{RSTOUTN, (M0 | PIN_OUTPUT)},	/* rstoutn.rstoutn */
 };
 
+const struct pad_conf_entry core_padconf_array_essential_am571x_idk[] = {
+	{GPMC_A0, (M6 | PIN_INPUT_PULLDOWN | VIRTUAL_MODE13)},	/* gpmc_a0.vin1b_d0 */
+	{GPMC_A1, (M6 | PIN_INPUT_PULLDOWN | VIRTUAL_MODE13)},	/* gpmc_a1.vin1b_d1 */
+	{GPMC_A2, (M6 | PIN_INPUT_PULLDOWN | VIRTUAL_MODE13)},	/* gpmc_a2.vin1b_d2 */
+	{GPMC_A3, (M6 | PIN_INPUT_PULLDOWN | VIRTUAL_MODE11)},	/* gpmc_a3.vin1b_d3 */
+	{GPMC_A4, (M6 | PIN_INPUT_PULLDOWN | VIRTUAL_MODE11)},	/* gpmc_a4.vin1b_d4 */
+	{GPMC_A5, (M6 | PIN_INPUT_PULLDOWN | VIRTUAL_MODE13)},	/* gpmc_a5.vin1b_d5 */
+	{GPMC_A6, (M6 | PIN_INPUT_PULLDOWN | VIRTUAL_MODE13)},	/* gpmc_a6.vin1b_d6 */
+	{GPMC_A7, (M6 | PIN_INPUT_PULLDOWN | VIRTUAL_MODE13)},	/* gpmc_a7.vin1b_d7 */
+	{GPMC_A8, (M6 | PIN_INPUT_PULLDOWN | VIRTUAL_MODE14)},	/* gpmc_a8.vin1b_hsync1 */
+	{GPMC_A9, (M6 | PIN_INPUT_PULLDOWN | VIRTUAL_MODE14)},	/* gpmc_a9.vin1b_vsync1 */
+	{GPMC_A10, (M6 | PIN_INPUT_PULLDOWN | VIRTUAL_MODE14)},	/* gpmc_a10.vin1b_clk1 */
+	{GPMC_A11, (M6 | PIN_INPUT_PULLDOWN | VIRTUAL_MODE13)},	/* gpmc_a11.vin1b_de1 */
+	{GPMC_A12, (M6 | PIN_INPUT_PULLDOWN | VIRTUAL_MODE14)},	/* gpmc_a12.vin1b_fld1 */
+	{GPMC_A13, (M1 | PIN_INPUT_PULLDOWN | MANUAL_MODE)},	/* gpmc_a13.qspi1_rtclk */
+	{GPMC_A14, (M1 | PIN_INPUT_PULLUP | MANUAL_MODE)},	/* gpmc_a14.qspi1_d3 */
+	{GPMC_A15, (M1 | PIN_INPUT_PULLUP | MANUAL_MODE)},	/* gpmc_a15.qspi1_d2 */
+	{GPMC_A16, (M1 | PIN_INPUT_PULLDOWN | MANUAL_MODE)},	/* gpmc_a16.qspi1_d0 */
+	{GPMC_A17, (M1 | PIN_INPUT_PULLDOWN) | MANUAL_MODE},	/* gpmc_a17.qspi1_d1 */
+	{GPMC_A18, (M1 | PIN_INPUT_PULLDOWN | MANUAL_MODE)},	/* gpmc_a18.qspi1_sclk */
+	{GPMC_A19, (M1 | PIN_INPUT_PULLUP)},	/* gpmc_a19.mmc2_dat4 */
+	{GPMC_A20, (M1 | PIN_INPUT_PULLUP)},	/* gpmc_a20.mmc2_dat5 */
+	{GPMC_A21, (M1 | PIN_INPUT_PULLUP)},	/* gpmc_a21.mmc2_dat6 */
+	{GPMC_A22, (M1 | PIN_INPUT_PULLUP)},	/* gpmc_a22.mmc2_dat7 */
+	{GPMC_A23, (M1 | PIN_INPUT_PULLUP)},	/* gpmc_a23.mmc2_clk */
+	{GPMC_A24, (M1 | PIN_INPUT_PULLUP)},	/* gpmc_a24.mmc2_dat0 */
+	{GPMC_A25, (M1 | PIN_INPUT_PULLUP)},	/* gpmc_a25.mmc2_dat1 */
+	{GPMC_A26, (M1 | PIN_INPUT_PULLUP)},	/* gpmc_a26.mmc2_dat2 */
+	{GPMC_A27, (M1 | PIN_INPUT_PULLUP)},	/* gpmc_a27.mmc2_dat3 */
+	{GPMC_CS1, (M1 | PIN_INPUT_PULLUP)},	/* gpmc_cs1.mmc2_cmd */
+	{GPMC_CS0, (M14 | PIN_INPUT_PULLDOWN)},	/* gpmc_cs0.gpio2_19 */
+	{GPMC_CS2, (M1 | PIN_INPUT_PULLUP | MANUAL_MODE)},	/* gpmc_cs2.qspi1_cs0 */
+	{GPMC_CS3, (M14 | PIN_INPUT_PULLDOWN)},	/* gpmc_cs3.gpio2_21 */
+	{GPMC_CLK, (M14 | PIN_INPUT_PULLUP)},	/* gpmc_clk.gpio2_22 */
+	{GPMC_ADVN_ALE, (M14 | PIN_INPUT_PULLUP)},	/* gpmc_advn_ale.gpio2_23 */
+	{GPMC_OEN_REN, (M14 | PIN_INPUT_PULLUP)},	/* gpmc_oen_ren.gpio2_24 */
+	{GPMC_WEN, (M14 | PIN_INPUT_PULLUP)},	/* gpmc_wen.gpio2_25 */
+	{GPMC_BEN0, (M14 | PIN_INPUT_PULLDOWN)},	/* gpmc_ben0.gpio2_26 */
+	{GPMC_BEN1, (M14 | PIN_INPUT_PULLUP)},	/* gpmc_ben1.gpio2_27 */
+	{GPMC_WAIT0, (M14 | PIN_INPUT_PULLDOWN | SLEWCONTROL)},	/* gpmc_wait0.gpio2_28 */
+	{VIN2A_CLK0, (M14 | PIN_INPUT_PULLUP)},	/* vin2a_clk0.gpio3_28 */
+	{VIN2A_DE0, (M14 | PIN_INPUT_PULLUP)},	/* vin2a_de0.gpio3_29 */
+	{VIN2A_FLD0, (M14 | PIN_INPUT_PULLUP)},	/* vin2a_fld0.gpio3_30 */
+	{VIN2A_HSYNC0, (M14 | PIN_INPUT_PULLUP)},	/* vin2a_hsync0.gpio3_31 */
+	{VIN2A_VSYNC0, (M14 | PIN_INPUT_PULLDOWN)},	/* vin2a_vsync0.gpio4_0 */
+	{VIN2A_D0, (M11 | PIN_INPUT_PULLDOWN)},	/* vin2a_d0.pr1_uart0_rxd */
+	{VIN2A_D1, (M11 | PIN_INPUT_PULLDOWN)},	/* vin2a_d1.pr1_uart0_txd */
+	{VIN2A_D2, (M10 | PIN_INPUT_PULLDOWN)},	/* vin2a_d2.eCAP1_in_PWM1_out */
+	{VIN2A_D3, (M11 | PIN_INPUT_PULLDOWN)},	/* vin2a_d3.pr1_mi1_col */
+	{VIN2A_D4, (M11 | PIN_INPUT_PULLDOWN)},	/* vin2a_d4.pr1_mii1_txd1 */
+	{VIN2A_D5, (M11 | PIN_INPUT_PULLDOWN)},	/* vin2a_d5.pr1_mii1_txd0 */
+	{VIN2A_D6, (M11 | PIN_INPUT_PULLDOWN)},	/* vin2a_d6.pr1_mii_mt1_clk */
+	{VIN2A_D7, (M11 | PIN_INPUT_PULLDOWN)},	/* vin2a_d7.pr1_mii1_txen */
+	{VIN2A_D8, (M11 | PIN_INPUT_PULLDOWN)},	/* vin2a_d8.pr1_mii1_txd3 */
+	{VIN2A_D9, (M11 | PIN_INPUT_PULLDOWN)},	/* vin2a_d9.pr1_mii1_txd2 */
+	{VIN2A_D10, (M11 | PIN_INPUT_PULLDOWN)},	/* vin2a_d10.pr1_mdio_mdclk */
+	{VIN2A_D11, (M11 | PIN_INPUT_PULLUP)},	/* vin2a_d11.pr1_mdio_data */
+	{VIN2A_D12, (M3 | PIN_INPUT_PULLDOWN | MANUAL_MODE)},	/* vin2a_d12.rgmii1_txc */
+	{VIN2A_D13, (M3 | PIN_INPUT_PULLDOWN | MANUAL_MODE)},	/* vin2a_d13.rgmii1_txctl */
+	{VIN2A_D14, (M3 | PIN_INPUT_PULLDOWN | MANUAL_MODE)},	/* vin2a_d14.rgmii1_txd3 */
+	{VIN2A_D15, (M3 | PIN_INPUT_PULLDOWN | MANUAL_MODE)},	/* vin2a_d15.rgmii1_txd2 */
+	{VIN2A_D16, (M3 | PIN_INPUT_PULLDOWN | MANUAL_MODE)},	/* vin2a_d16.rgmii1_txd1 */
+	{VIN2A_D17, (M3 | PIN_INPUT_PULLDOWN | MANUAL_MODE)},	/* vin2a_d17.rgmii1_txd0 */
+	{VIN2A_D18, (M3 | PIN_INPUT_PULLDOWN | MANUAL_MODE)},	/* vin2a_d18.rgmii1_rxc */
+	{VIN2A_D19, (M3 | PIN_INPUT_PULLUP | MANUAL_MODE)},	/* vin2a_d19.rgmii1_rxctl */
+	{VIN2A_D20, (M3 | PIN_INPUT_PULLUP | MANUAL_MODE)},	/* vin2a_d20.rgmii1_rxd3 */
+	{VIN2A_D21, (M3 | PIN_INPUT_PULLUP | MANUAL_MODE)},	/* vin2a_d21.rgmii1_rxd2 */
+	{VIN2A_D22, (M3 | PIN_INPUT_PULLUP | MANUAL_MODE)},	/* vin2a_d22.rgmii1_rxd1 */
+	{VIN2A_D23, (M3 | PIN_INPUT_PULLUP | MANUAL_MODE)},	/* vin2a_d23.rgmii1_rxd0 */
+	{VOUT1_CLK, (M0 | PIN_INPUT_PULLDOWN)},	/* vout1_clk.vout1_clk */
+	{VOUT1_DE, (M0 | PIN_INPUT_PULLDOWN)},	/* vout1_de.vout1_de */
+	{VOUT1_FLD, (M14 | PIN_INPUT_PULLUP)},	/* vout1_fld.gpio4_21 */
+	{VOUT1_HSYNC, (M0 | PIN_INPUT_PULLDOWN)},	/* vout1_hsync.vout1_hsync */
+	{VOUT1_VSYNC, (M0 | PIN_INPUT_PULLDOWN)},	/* vout1_vsync.vout1_vsync */
+	{VOUT1_D0, (M0 | PIN_INPUT_PULLDOWN)},	/* vout1_d0.vout1_d0 */
+	{VOUT1_D1, (M0 | PIN_INPUT_PULLDOWN)},	/* vout1_d1.vout1_d1 */
+	{VOUT1_D2, (M0 | PIN_INPUT_PULLDOWN)},	/* vout1_d2.vout1_d2 */
+	{VOUT1_D3, (M0 | PIN_INPUT_PULLDOWN)},	/* vout1_d3.vout1_d3 */
+	{VOUT1_D4, (M0 | PIN_INPUT_PULLDOWN)},	/* vout1_d4.vout1_d4 */
+	{VOUT1_D5, (M0 | PIN_INPUT_PULLDOWN)},	/* vout1_d5.vout1_d5 */
+	{VOUT1_D6, (M0 | PIN_INPUT_PULLDOWN)},	/* vout1_d6.vout1_d6 */
+	{VOUT1_D7, (M0 | PIN_INPUT_PULLDOWN)},	/* vout1_d7.vout1_d7 */
+	{VOUT1_D8, (M0 | PIN_INPUT_PULLDOWN)},	/* vout1_d8.vout1_d8 */
+	{VOUT1_D9, (M0 | PIN_INPUT_PULLDOWN)},	/* vout1_d9.vout1_d9 */
+	{VOUT1_D10, (M0 | PIN_INPUT_PULLDOWN)},	/* vout1_d10.vout1_d10 */
+	{VOUT1_D11, (M0 | PIN_INPUT_PULLDOWN)},	/* vout1_d11.vout1_d11 */
+	{VOUT1_D12, (M0 | PIN_INPUT_PULLDOWN)},	/* vout1_d12.vout1_d12 */
+	{VOUT1_D13, (M0 | PIN_INPUT_PULLDOWN)},	/* vout1_d13.vout1_d13 */
+	{VOUT1_D14, (M0 | PIN_INPUT_PULLDOWN)},	/* vout1_d14.vout1_d14 */
+	{VOUT1_D15, (M0 | PIN_INPUT_PULLDOWN)},	/* vout1_d15.vout1_d15 */
+	{VOUT1_D16, (M0 | PIN_INPUT_PULLDOWN)},	/* vout1_d16.vout1_d16 */
+	{VOUT1_D17, (M0 | PIN_INPUT_PULLDOWN)},	/* vout1_d17.vout1_d17 */
+	{VOUT1_D18, (M0 | PIN_INPUT_PULLDOWN)},	/* vout1_d18.vout1_d18 */
+	{VOUT1_D19, (M0 | PIN_INPUT_PULLDOWN)},	/* vout1_d19.vout1_d19 */
+	{VOUT1_D20, (M0 | PIN_INPUT_PULLDOWN)},	/* vout1_d20.vout1_d20 */
+	{VOUT1_D21, (M0 | PIN_INPUT_PULLDOWN)},	/* vout1_d21.vout1_d21 */
+	{VOUT1_D22, (M0 | PIN_INPUT_PULLDOWN)},	/* vout1_d22.vout1_d22 */
+	{VOUT1_D23, (M0 | PIN_INPUT_PULLDOWN)},	/* vout1_d23.vout1_d23 */
+	{MDIO_MCLK, (M0 | PIN_INPUT_PULLUP | SLEWCONTROL)},	/* mdio_mclk.mdio_mclk */
+	{MDIO_D, (M0 | PIN_INPUT_PULLUP | SLEWCONTROL)},	/* mdio_d.mdio_d */
+	{RMII_MHZ_50_CLK, (M13 | PIN_INPUT_PULLDOWN)},	/* RMII_MHZ_50_CLK.pr2_pru1_gpo2 */
+	{UART3_RXD, (M14 | PIN_INPUT_SLEW)},	/* uart3_rxd.gpio5_18 */
+	{UART3_TXD, (M14 | PIN_INPUT_SLEW)},	/* uart3_txd.gpio5_19 */
+	{RGMII0_TXC, (M0 | PIN_INPUT_PULLDOWN | MANUAL_MODE)},	/* rgmii0_txc.rgmii0_txc */
+	{RGMII0_TXCTL, (M0 | PIN_INPUT_PULLDOWN | MANUAL_MODE)},	/* rgmii0_txctl.rgmii0_txctl */
+	{RGMII0_TXD3, (M0 | PIN_INPUT_PULLDOWN | MANUAL_MODE)},	/* rgmii0_txd3.rgmii0_txd3 */
+	{RGMII0_TXD2, (M0 | PIN_INPUT_PULLDOWN | MANUAL_MODE)},	/* rgmii0_txd2.rgmii0_txd2 */
+	{RGMII0_TXD1, (M0 | PIN_INPUT_PULLDOWN | MANUAL_MODE)},	/* rgmii0_txd1.rgmii0_txd1 */
+	{RGMII0_TXD0, (M0 | PIN_INPUT_PULLDOWN | MANUAL_MODE)},	/* rgmii0_txd0.rgmii0_txd0 */
+	{RGMII0_RXC, (M0 | PIN_INPUT_PULLDOWN | MANUAL_MODE)},	/* rgmii0_rxc.rgmii0_rxc */
+	{RGMII0_RXCTL, (M0 | PIN_INPUT_PULLDOWN | MANUAL_MODE)},/* rgmii0_rxctl.rgmii0_rxctl */
+	{RGMII0_RXD3, (M0 | PIN_INPUT_PULLDOWN | MANUAL_MODE)},	/* rgmii0_rxd3.rgmii0_rxd3 */
+	{RGMII0_RXD2, (M0 | PIN_INPUT_PULLDOWN | MANUAL_MODE)},	/* rgmii0_rxd2.rgmii0_rxd2 */
+	{RGMII0_RXD1, (M0 | PIN_INPUT_PULLDOWN | MANUAL_MODE)},	/* rgmii0_rxd1.rgmii0_rxd1 */
+	{RGMII0_RXD0, (M0 | PIN_INPUT_PULLDOWN | MANUAL_MODE)},	/* rgmii0_rxd0.rgmii0_rxd0 */
+	{USB1_DRVVBUS, (M0 | PIN_INPUT_SLEW)},	/* usb1_drvvbus.usb1_drvvbus */
+	{USB2_DRVVBUS, (M0 | PIN_INPUT_SLEW)},	/* usb2_drvvbus.usb2_drvvbus */
+	{GPIO6_14, (M14 | PIN_INPUT_PULLUP)},	/* gpio6_14.gpio6_14 */
+	{GPIO6_15, (M14 | PIN_INPUT_PULLUP)},	/* gpio6_15.gpio6_15 */
+	{GPIO6_16, (M14 | PIN_INPUT_PULLDOWN)},	/* gpio6_16.gpio6_16 */
+	{XREF_CLK0, (M11 | PIN_INPUT_PULLDOWN)},	/* xref_clk0.pr2_mii1_col */
+	{XREF_CLK1, (M11 | PIN_INPUT_PULLDOWN)},	/* xref_clk1.pr2_mii1_crs */
+	{XREF_CLK2, (M14 | PIN_INPUT_PULLDOWN)},	/* xref_clk2.gpio6_19 */
+	{XREF_CLK3, (M15 | PIN_INPUT_PULLDOWN)},	/* xref_clk3.Driveroff */
+	{MCASP1_ACLKX, (M11 | PIN_INPUT_PULLDOWN)},	/* mcasp1_aclkx.pr2_mdio_mdclk */
+	{MCASP1_FSX, (M11 | PIN_INPUT_SLEW)},	/* mcasp1_fsx.pr2_mdio_data */
+	{MCASP1_ACLKR, (M14 | PIN_INPUT_PULLUP)},	/* mcasp1_aclkr.gpio5_0 */
+	{MCASP1_FSR, (M14 | PIN_INPUT_PULLUP)},	/* mcasp1_fsr.gpio5_1 */
+	{MCASP1_AXR0, (M11 | PIN_INPUT_PULLUP | SLEWCONTROL)},	/* mcasp1_axr0.pr2_mii0_rxer */
+	{MCASP1_AXR1, (M11 | PIN_INPUT_SLEW)},	/* mcasp1_axr1.pr2_mii_mt0_clk */
+	{MCASP1_AXR2, (M14 | PIN_INPUT_PULLDOWN)},	/* mcasp1_axr2.gpio5_4 */
+	{MCASP1_AXR3, (M14 | PIN_INPUT_PULLUP)},	/* mcasp1_axr3.gpio5_5 */
+	{MCASP1_AXR4, (M14 | PIN_INPUT_PULLDOWN)},	/* mcasp1_axr4.gpio5_6 */
+	{MCASP1_AXR5, (M14 | PIN_INPUT_PULLDOWN)},	/* mcasp1_axr5.gpio5_7 */
+	{MCASP1_AXR6, (M14 | PIN_INPUT_PULLUP)},	/* mcasp1_axr6.gpio5_8 */
+	{MCASP1_AXR7, (M14 | PIN_INPUT_PULLUP)},	/* mcasp1_axr7.gpio5_9 */
+	{MCASP1_AXR8, (M11 | PIN_INPUT_SLEW)},	/* mcasp1_axr8.pr2_mii0_txen */
+	{MCASP1_AXR9, (M11 | PIN_INPUT_SLEW)},	/* mcasp1_axr9.pr2_mii0_txd3 */
+	{MCASP1_AXR10, (M11 | PIN_INPUT_SLEW)},	/* mcasp1_axr10.pr2_mii0_txd2 */
+	{MCASP1_AXR11, (M11 | PIN_INPUT_SLEW)},	/* mcasp1_axr11.pr2_mii0_txd1 */
+	{MCASP1_AXR12, (M11 | PIN_INPUT_SLEW)},	/* mcasp1_axr12.pr2_mii0_txd0 */
+	{MCASP1_AXR13, (M11 | PIN_INPUT_SLEW)},	/* mcasp1_axr13.pr2_mii_mr0_clk */
+	{MCASP1_AXR14, (M11 | PIN_INPUT_PULLDOWN | SLEWCONTROL)},	/* mcasp1_axr14.pr2_mii0_rxdv */
+	{MCASP1_AXR15, (M11 | PIN_INPUT_SLEW)},	/* mcasp1_axr15.pr2_mii0_rxd3 */
+	{MCASP2_ACLKX, (M11 | PIN_INPUT_SLEW)},	/* mcasp2_aclkx.pr2_mii0_rxd2 */
+	{MCASP2_FSX, (M11 | PIN_INPUT_SLEW)},	/* mcasp2_fsx.pr2_mii0_rxd1 */
+	{MCASP2_ACLKR, (M15 | PIN_INPUT_PULLDOWN)},	/* mcasp2_aclkr.Driveroff */
+	{MCASP2_FSR, (M15 | PIN_INPUT_PULLDOWN)},	/* mcasp2_fsr.Driveroff */
+	{MCASP2_AXR0, (M15 | PIN_INPUT_PULLDOWN)},	/* mcasp2_axr0.Driveroff */
+	{MCASP2_AXR1, (M15 | PIN_INPUT_PULLDOWN)},	/* mcasp2_axr1.Driveroff */
+	{MCASP2_AXR2, (M11 | PIN_INPUT_SLEW)},	/* mcasp2_axr2.pr2_mii0_rxd0 */
+	{MCASP2_AXR3, (M11 | PIN_INPUT_PULLDOWN | SLEWCONTROL)},	/* mcasp2_axr3.pr2_mii0_rxlink */
+	{MCASP2_AXR4, (M14 | PIN_INPUT_PULLDOWN)},	/* mcasp2_axr4.gpio1_4 */
+	{MCASP2_AXR5, (M14 | PIN_INPUT_PULLDOWN)},	/* mcasp2_axr5.gpio6_7 */
+	{MCASP2_AXR6, (M14 | PIN_INPUT_PULLDOWN)},	/* mcasp2_axr6.gpio2_29 */
+	{MCASP2_AXR7, (M14 | PIN_INPUT_PULLDOWN)},	/* mcasp2_axr7.gpio1_5 */
+	{MCASP3_ACLKX, (M11 | PIN_INPUT_PULLDOWN)},	/* mcasp3_aclkx.pr2_mii0_crs */
+	{MCASP3_FSX, (M11 | PIN_INPUT_SLEW)},	/* mcasp3_fsx.pr2_mii0_col */
+	{MCASP3_AXR0, (M11 | PIN_INPUT_PULLUP | SLEWCONTROL)},	/* mcasp3_axr0.pr2_mii1_rxer */
+	{MCASP3_AXR1, (M11 | PIN_INPUT_PULLUP | SLEWCONTROL)},	/* mcasp3_axr1.pr2_mii1_rxlink */
+	{MCASP4_ACLKX, (M2 | PIN_INPUT_PULLDOWN)},	/* mcasp4_aclkx.spi3_sclk */
+	{MCASP4_FSX, (M2 | PIN_INPUT_PULLDOWN)},	/* mcasp4_fsx.spi3_d1 */
+	{MCASP4_AXR0, (M15 | PIN_INPUT_PULLDOWN)},	/* mcasp4_axr0.Driveroff */
+	{MCASP4_AXR1, (M2 | PIN_INPUT_PULLDOWN)},	/* mcasp4_axr1.spi3_cs0 */
+	{MCASP5_ACLKX, (M13 | PIN_INPUT_PULLDOWN)},	/* mcasp5_aclkx.pr2_pru1_gpo1 */
+	{MCASP5_FSX, (M12 | PIN_INPUT_PULLDOWN)},	/* mcasp5_fsx.pr2_pru1_gpi2 */
+	{MCASP5_AXR0, (M15 | PIN_INPUT_PULLDOWN)},	/* mcasp5_axr0.Driveroff */
+	{MCASP5_AXR1, (M15 | PIN_INPUT_PULLDOWN)},	/* mcasp5_axr1.Driveroff */
+	{MMC1_CLK, (M0 | PIN_INPUT_PULLUP)},	/* mmc1_clk.mmc1_clk */
+	{MMC1_CMD, (M0 | PIN_INPUT_PULLUP)},	/* mmc1_cmd.mmc1_cmd */
+	{MMC1_DAT0, (M0 | PIN_INPUT_PULLUP)},	/* mmc1_dat0.mmc1_dat0 */
+	{MMC1_DAT1, (M0 | PIN_INPUT_PULLUP)},	/* mmc1_dat1.mmc1_dat1 */
+	{MMC1_DAT2, (M0 | PIN_INPUT_PULLUP)},	/* mmc1_dat2.mmc1_dat2 */
+	{MMC1_DAT3, (M0 | PIN_INPUT_PULLUP)},	/* mmc1_dat3.mmc1_dat3 */
+	{MMC1_SDCD, (M14 | PIN_INPUT_PULLUP)},	/* mmc1_sdcd.gpio6_27 */
+	{MMC1_SDWP, (M0 | PIN_OUTPUT)},	/* mmc1_sdwp.mmc1_sdwp */
+	{GPIO6_10, (M11 | PIN_INPUT_PULLUP)},	/* gpio6_10.pr2_mii_mt1_clk */
+	{GPIO6_11, (M11 | PIN_INPUT_PULLUP)},	/* gpio6_11.pr2_mii1_txen */
+	{MMC3_CLK, (M11 | PIN_INPUT_PULLUP)},	/* mmc3_clk.pr2_mii1_txd3 */
+	{MMC3_CMD, (M11 | PIN_INPUT_PULLUP)},	/* mmc3_cmd.pr2_mii1_txd2 */
+	{MMC3_DAT0, (M11 | PIN_INPUT_PULLUP)},	/* mmc3_dat0.pr2_mii1_txd1 */
+	{MMC3_DAT1, (M11 | PIN_INPUT_PULLUP)},	/* mmc3_dat1.pr2_mii1_txd0 */
+	{MMC3_DAT2, (M11 | PIN_INPUT_PULLUP)},	/* mmc3_dat2.pr2_mii_mr1_clk */
+	{MMC3_DAT3, (M11 | PIN_INPUT_PULLDOWN)},	/* mmc3_dat3.pr2_mii1_rxdv */
+	{MMC3_DAT4, (M11 | PIN_INPUT_PULLDOWN)},	/* mmc3_dat4.pr2_mii1_rxd3 */
+	{MMC3_DAT5, (M11 | PIN_INPUT_PULLDOWN)},	/* mmc3_dat5.pr2_mii1_rxd2 */
+	{MMC3_DAT6, (M11 | PIN_INPUT_PULLDOWN)},	/* mmc3_dat6.pr2_mii1_rxd1 */
+	{MMC3_DAT7, (M11 | PIN_INPUT_PULLDOWN)},	/* mmc3_dat7.pr2_mii1_rxd0 */
+	{SPI1_SCLK, (M14 | PIN_INPUT_PULLDOWN)},	/* spi1_sclk.gpio7_7 */
+	{SPI1_D1, (M14 | PIN_INPUT_PULLDOWN)},	/* spi1_d1.gpio7_8 */
+	{SPI1_D0, (M14 | PIN_INPUT_PULLDOWN)},	/* spi1_d0.gpio7_9 */
+	{SPI1_CS0, (M14 | PIN_INPUT_PULLDOWN)},	/* spi1_cs0.gpio7_10 */
+	{SPI1_CS1, (M14 | PIN_INPUT_PULLDOWN)},	/* spi1_cs1.gpio7_11 */
+	{SPI1_CS2, (M14 | PIN_INPUT_PULLDOWN)},	/* spi1_cs2.gpio7_12 */
+	{SPI1_CS3, (M6 | PIN_INPUT_PULLUP | SLEWCONTROL)},	/* spi1_cs3.hdmi1_cec */
+	{SPI2_SCLK, (M0 | PIN_INPUT_PULLDOWN)},	/* spi2_sclk.spi2_sclk */
+	{SPI2_D1, (M0 | PIN_INPUT_SLEW)},	/* spi2_d1.spi2_d1 */
+	{SPI2_D0, (M0 | PIN_INPUT_SLEW)},	/* spi2_d0.spi2_d0 */
+	{SPI2_CS0, (M0 | PIN_INPUT_PULLUP | SLEWCONTROL)},	/* spi2_cs0.spi2_cs0 */
+	{DCAN1_TX, (M15 | PULL_UP)},	/* dcan1_tx.safe for dcan1_tx */
+	{DCAN1_RX, (M15 | PULL_UP)},	/* dcan1_rx.safe for dcan1_rx */
+	{UART1_RXD, (M14 | PIN_INPUT_PULLUP | SLEWCONTROL)},	/* uart1_rxd.gpio7_22 */
+	{UART1_CTSN, (M14 | PIN_INPUT_PULLDOWN)},	/* uart1_ctsn.gpio7_24 */
+	{UART1_RTSN, (M14 | PIN_INPUT_PULLDOWN)},	/* uart1_rtsn.gpio7_25 */
+	{UART2_RXD, (M0 | PIN_INPUT_PULLUP)},	/* uart2_rxd.uart2_rxd */
+	{UART2_TXD, (M0 | PIN_INPUT_PULLUP)},	/* uart2_txd.uart2_txd */
+	{UART2_CTSN, (M2 | PIN_INPUT_PULLUP)},	/* uart2_ctsn.uart3_rxd */
+	{UART2_RTSN, (M1 | PIN_INPUT_PULLUP)},	/* uart2_rtsn.uart3_txd */
+	{I2C2_SDA, (M1 | PIN_INPUT_PULLUP)},	/* i2c2_sda.hdmi1_ddc_scl */
+	{I2C2_SCL, (M1 | PIN_INPUT_PULLUP)},	/* i2c2_scl.hdmi1_ddc_sda */
+	{WAKEUP0, (M0 | PIN_OUTPUT_PULLDOWN)},	/* Wakeup0.Wakeup0 */
+	{WAKEUP3, (M0 | PIN_OUTPUT_PULLDOWN)},	/* Wakeup3.Wakeup3 */
+	{ON_OFF, (M0 | PIN_OUTPUT_PULLUP)},	/* on_off.on_off */
+	{RTC_PORZ, (M0 | PIN_OUTPUT)},	/* rtc_porz.rtc_porz */
+	{TMS, (M0 | PIN_INPUT_PULLUP)},	/* tms.tms */
+	{TDI, (M0 | PIN_INPUT_PULLUP | SLEWCONTROL)},	/* tdi.tdi */
+	{TDO, (M0 | PIN_INPUT_PULLUP)},	/* tdo.tdo */
+	{TCLK, (M0 | PIN_INPUT_PULLUP)},	/* tclk.tclk */
+	{TRSTN, (M0 | PIN_INPUT_PULLDOWN)},	/* trstn.trstn */
+	{RTCK, (M0 | PIN_INPUT)},	/* rtck.rtck */
+	{EMU0, (M0 | PIN_INPUT_PULLUP)},	/* emu0.emu0 */
+	{EMU1, (M0 | PIN_INPUT_PULLUP)},	/* emu1.emu1 */
+	{RESETN, (M0 | PIN_OUTPUT_PULLUP)},	/* resetn.resetn */
+	{RSTOUTN, (M0 | PIN_OUTPUT_PULLDOWN)},	/* rstoutn.rstoutn */
+};
+
 const struct pad_conf_entry early_padconf[] = {
 	{UART2_CTSN, (M2 | PIN_INPUT_SLEW)},	/* uart2_ctsn.uart3_rxd */
 	{UART2_RTSN, (M1 | PIN_INPUT_SLEW)},	/* uart2_rtsn.uart3_txd */
@@ -687,5 +913,42 @@  const struct iodelay_cfg_entry iodelay_cfg_array_am572x_idk[] = {
 	{0x0AF8, 0, 1330},	/* CFG_VIN2A_D23_IN */
 	{0x0B30, 0, 0},	/* CFG_VIN2A_D5_OUT */
 };
+
+const struct iodelay_cfg_entry iodelay_cfg_array_am571x_idk[] = {
+	{0x0144, 0, 0},		/* CFG_GPMC_A13_IN */
+	{0x0150, 2062, 2277},	/* CFG_GPMC_A14_IN */
+	{0x015C, 1960, 2289},	/* CFG_GPMC_A15_IN */
+	{0x0168, 2058, 2386},	/* CFG_GPMC_A16_IN */
+	{0x0170, 0, 0},		/* CFG_GPMC_A16_OUT */
+	{0x0174, 2062, 2350},	/* CFG_GPMC_A17_IN */
+	{0x0188, 0, 0},		/* CFG_GPMC_A18_OUT */
+	{0x0374, 121, 0},       /* CFG_GPMC_CS2_OUT */
+	{0x06F0, 413, 0},       /* CFG_RGMII0_RXC_IN */
+	{0x06FC, 27, 2296},     /* CFG_RGMII0_RXCTL_IN */
+	{0x0708, 3, 1721},      /* CFG_RGMII0_RXD0_IN */
+	{0x0714, 134, 1786},    /* CFG_RGMII0_RXD1_IN */
+	{0x0720, 40, 1966},     /* CFG_RGMII0_RXD2_IN */
+	{0x072C, 0, 2057},      /* CFG_RGMII0_RXD3_IN */
+	{0x0740, 0, 60},        /* CFG_RGMII0_TXC_OUT */
+	{0x074C, 0, 60},        /* CFG_RGMII0_TXCTL_OUT */
+	{0x0758, 0, 60},        /* CFG_RGMII0_TXD0_OUT */
+	{0x0764, 0, 0},         /* CFG_RGMII0_TXD1_OUT */
+	{0x0770, 0, 60},        /* CFG_RGMII0_TXD2_OUT */
+	{0x077C, 0, 120},       /* CFG_RGMII0_TXD3_OUT */
+	{0x0A70, 0, 0},         /* CFG_VIN2A_D12_OUT */
+	{0x0A7C, 170, 0},       /* CFG_VIN2A_D13_OUT */
+	{0x0A88, 150, 0},       /* CFG_VIN2A_D14_OUT */
+	{0x0A94, 0, 0},         /* CFG_VIN2A_D15_OUT */
+	{0x0AA0, 60, 0},        /* CFG_VIN2A_D16_OUT */
+	{0x0AAC, 60, 0},        /* CFG_VIN2A_D17_OUT */
+	{0x0AB0, 530, 0},       /* CFG_VIN2A_D18_IN */
+	{0x0ABC, 71, 1099},     /* CFG_VIN2A_D19_IN */
+	{0x0AC8, 2229, 10},     /* CFG_VIN2A_D1_IN */
+	{0x0AD4, 142, 1337},    /* CFG_VIN2A_D20_IN */
+	{0x0AE0, 114, 1517},    /* CFG_VIN2A_D21_IN */
+	{0x0AEC, 171, 1331},    /* CFG_VIN2A_D22_IN */
+	{0x0AF8, 0, 1328},      /* CFG_VIN2A_D23_IN */
+};
+
 #endif
 #endif /* _MUX_DATA_BEAGLE_X15_H_ */
diff --git a/include/configs/ti_omap5_common.h b/include/configs/ti_omap5_common.h
index 540bde8..86e5464 100644
--- a/include/configs/ti_omap5_common.h
+++ b/include/configs/ti_omap5_common.h
@@ -110,6 +110,8 @@ 
 			"setenv fdtfile am57xx-beagle-x15.dtb; fi;" \
 		"if test $board_name = am57xx_evm_reva3; then " \
 			"setenv fdtfile am57xx-beagle-x15.dtb; fi;" \
+		"if test $board_name = am571x_idk; then " \
+			"setenv fdtfile am571x-idk.dtb; fi;" \
 		"if test $fdtfile = undefined; then " \
 			"echo WARNING: Could not determine device tree to use; fi; \0" \
 	"loadfdt=load mmc ${bootpart} ${fdtaddr} ${bootdir}/${fdtfile};\0" \