new file mode 100644
@@ -0,0 +1,47 @@
+IIO multiplexer bindings
+
+If a multiplexer is used to select which hardware signal is fed to
+e.g. an ADC channel, these bindings describe that situation.
+
+Required properties:
+- compatible : "iio-mux"
+- io-channels : Channel node of the parent channel that has multiplexed
+ input.
+- io-channel-names : Should be "parent".
+- #address-cells = <1>;
+- #size-cells = <0>;
+
+Required properties for iio-mux child nodes:
+- reg : The multiplexer state as described in ../misc/mux-controller.txt
+
+For each iio-mux child, an iio channel will be created whose number will
+match the mux controller state.
+
+Example:
+ mux {
+ compatible = "mux-gpio";
+
+ mux-gpios = <&pioA 0 GPIO_ACTIVE_HIGH>,
+ <&pioA 1 GPIO_ACTIVE_HIGH>;
+
+ adc {
+ compatible = "iio-mux";
+ io-channels = <&adc 0>;
+ io-channel-names = "parent";
+
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ sync@0 {
+ reg = <0>;
+ };
+
+ in@1 {
+ reg = <1>;
+ };
+
+ system-regulator@2 {
+ reg = <2>;
+ };
+ };
+ };
@@ -6124,6 +6124,12 @@ L: linux-media@vger.kernel.org
S: Maintained
F: drivers/media/rc/iguanair.c
+IIO MULTIPLEXER
+M: Peter Rosin <peda@axentia.se>
+L: linux-iio@vger.kernel.org
+S: Maintained
+F: Documentation/devicetree/bindings/iio/multiplexer/iio-mux.txt
+
IIO SUBSYSTEM AND DRIVERS
M: Jonathan Cameron <jic23@kernel.org>
R: Hartmut Knaack <knaack.h@gmx.de>
Signed-off-by: Peter Rosin <peda@axentia.se> --- .../bindings/iio/multiplexer/iio-mux.txt | 47 ++++++++++++++++++++++ MAINTAINERS | 6 +++ 2 files changed, 53 insertions(+) create mode 100644 Documentation/devicetree/bindings/iio/multiplexer/iio-mux.txt