deleted file mode 100644
@@ -1,14 +0,0 @@
-Enable raw module by default
-
-Signed-off-by: Daniel Nyström <daniel.nystrom@timeterminal.se>
-
-diff -Naur tslib-e000d35a.orig/etc/ts.conf tslib-e000d35a/etc/ts.conf
---- tslib-e000d35a.orig/etc/ts.conf 2010-12-21 18:54:45.000000000 +0100
-+++ tslib-e000d35a/etc/ts.conf 2010-12-21 18:55:03.000000000 +0100
-@@ -1,5 +1,5 @@
- # Uncomment if you wish to use the linux input layer event interface
--# module_raw input
-+module_raw input
-
- # Uncomment if you're using a Sharp Zaurus SL-5500/SL-5000d
- # module_raw collie
deleted file mode 100644
@@ -1,718 +0,0 @@
-diff -Naur tslib-org/tests/Makefile.am tslib-1.0/tests/Makefile.am
---- tslib-org/tests/Makefile.am 2006-08-25 00:02:55.000000000 +0300
-+++ tslib-1.0/tests/Makefile.am 2007-05-07 17:39:54.000000000 +0300
-@@ -12,7 +12,7 @@
- AM_CFLAGS = $(DEBUGFLAGS)
- INCLUDES = -I$(top_srcdir)/src
-
--bin_PROGRAMS = ts_test ts_calibrate ts_print ts_print_raw ts_harvest
-+bin_PROGRAMS = ts_test ts_calibrate ts_print ts_print_raw ts_harvest ts_finddev inputattach
-
- ts_test_SOURCES = ts_test.c fbutils.c fbutils.h font_8x8.c font_8x16.c font.h
- ts_test_LDADD = $(top_builddir)/src/libts.la
-@@ -27,4 +27,10 @@
- ts_calibrate_LDADD = $(top_builddir)/src/libts.la
-
- ts_harvest_SOURCES = ts_harvest.c fbutils.c fbutils.h testutils.c testutils.h font_8x8.c font_8x16.c font.h
--ts_harvest_LDADD = $(top_builddir)/src/libts.la
-+ts_harvest_LDADD = $(top_builddir)/src/libts.la
-+
-+ts_finddev_SOURCES = ts_finddev.c
-+ts_finddev_LDADD = $(top_builddir)/src/libts.la
-+
-+inputattach_SOURCES = inputattach.c
-+inputattach_LDADD =
-diff -Naur tslib-org/tests/inputattach.c tslib-1.0/tests/inputattach.c
---- tslib-org/tests/inputattach.c 1970-01-01 02:00:00.000000000 +0200
-+++ tslib-1.0/tests/inputattach.c 2007-05-07 17:36:37.000000000 +0300
-@@ -0,0 +1,611 @@
-+/*
-+ * $Id: inputattach.c,v 1.24 2006/02/08 12:19:31 vojtech Exp $
-+ *
-+ * Copyright (c) 1999-2000 Vojtech Pavlik
-+ *
-+ * Sponsored by SuSE
-+ *
-+ * Twiddler support Copyright (c) 2001 Arndt Schoenewald
-+ * Sponsored by Quelltext AG (http://www.quelltext-ag.de), Dortmund, Germany
-+ */
-+
-+/*
-+ * Input line discipline attach program
-+ */
-+
-+/*
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License as published by
-+ * the Free Software Foundation; either version 2 of the License, or
-+ * (at your option) any later version.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-+ * GNU General Public License for more details.
-+ *
-+ * You should have received a copy of the GNU General Public License
-+ * along with this program; if not, write to the Free Software
-+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
-+ *
-+ * Should you need to contact me, the author, you can do so either by
-+ * e-mail - mail your message to <vojtech@ucw.cz>, or by paper mail:
-+ * Vojtech Pavlik, Simunkova 1594, Prague 8, 182 00 Czech Republic
-+ */
-+
-+/* softa note:
-+cvs version is here:
-+http://cvs.sourceforge.net/viewcvs.py/ *checkout* /linuxconsole/ruby/utils/inputattach.c
-+*/
-+
-+#include <linux/serio.h>
-+
-+#include <sys/types.h>
-+#include <sys/stat.h>
-+#include <sys/ioctl.h>
-+#include <sys/time.h>
-+
-+#include <stdio.h>
-+#include <stdlib.h>
-+#include <unistd.h>
-+#include <fcntl.h>
-+#include <termios.h>
-+#include <string.h>
-+#include <assert.h>
-+#include <ctype.h>
-+
-+// softa patch!
-+/*
-+ * Serio types
-+ */
-+#ifndef SERIO_UNKNOWN
-+ #define SERIO_UNKNOWN 0x00
-+#endif
-+#ifndef SERIO_MSC
-+ #define SERIO_MSC 0x01
-+#endif
-+#ifndef SERIO_SUN
-+ #define SERIO_SUN 0x02
-+#endif
-+#ifndef SERIO_MS
-+ #define SERIO_MS 0x03
-+#endif
-+#ifndef SERIO_MP
-+ #define SERIO_MP 0x04
-+#endif
-+#ifndef SERIO_MZ
-+ #define SERIO_MZ 0x05
-+#endif
-+#ifndef SERIO_MZP
-+ #define SERIO_MZP 0x06
-+#endif
-+#ifndef SERIO_MZPP
-+ #define SERIO_MZPP 0x07
-+#endif
-+#ifndef SERIO_VSXXXAA
-+ #define SERIO_VSXXXAA 0x08
-+#endif
-+#ifndef SERIO_SUNKBD
-+ #define SERIO_SUNKBD 0x10
-+#endif
-+#ifndef SERIO_WARRIOR
-+ #define SERIO_WARRIOR 0x18
-+#endif
-+#ifndef SERIO_SPACEORB
-+ #define SERIO_SPACEORB 0x19
-+#endif
-+#ifndef SERIO_MAGELLAN
-+ #define SERIO_MAGELLAN 0x1a
-+#endif
-+#ifndef SERIO_SPACEBALL
-+ #define SERIO_SPACEBALL 0x1b
-+#endif
-+#ifndef SERIO_GUNZE
-+ #define SERIO_GUNZE 0x1c
-+#endif
-+#ifndef SERIO_IFORCE
-+ #define SERIO_IFORCE 0x1d
-+#endif
-+#ifndef SERIO_STINGER
-+ #define SERIO_STINGER 0x1e
-+#endif
-+#ifndef SERIO_NEWTON
-+ #define SERIO_NEWTON 0x1f
-+#endif
-+#ifndef SERIO_STOWAWAY
-+ #define SERIO_STOWAWAY 0x20
-+#endif
-+#ifndef SERIO_H3600
-+ #define SERIO_H3600 0x21
-+#endif
-+#ifndef SERIO_PS2SER
-+ #define SERIO_PS2SER 0x22
-+#endif
-+#ifndef SERIO_TWIDKBD
-+ #define SERIO_TWIDKBD 0x23
-+#endif
-+#ifndef SERIO_TWIDJOY
-+ #define SERIO_TWIDJOY 0x24
-+#endif
-+#ifndef SERIO_HIL
-+ #define SERIO_HIL 0x25
-+#endif
-+#ifndef SERIO_SNES232
-+ #define SERIO_SNES232 0x26
-+#endif
-+#ifndef SERIO_SEMTECH
-+ #define SERIO_SEMTECH 0x27
-+#endif
-+#ifndef SERIO_LKKBD
-+ #define SERIO_LKKBD 0x28
-+#endif
-+#ifndef SERIO_ELO
-+ #define SERIO_ELO 0x29
-+#endif
-+#ifndef SERIO_MICROTOUCH
-+ #define SERIO_MICROTOUCH 0x30
-+#endif
-+#ifndef SERIO_PENMOUNT
-+ #define SERIO_PENMOUNT 0x31
-+#endif
-+#ifndef SERIO_TOUCHRIGHT
-+ #define SERIO_TOUCHRIGHT 0x32
-+#endif
-+#ifndef SERIO_TOUCHWIN
-+ #define SERIO_TOUCHWIN 0x33
-+#endif
-+// end softa patch!
-+
-+int readchar(int fd, unsigned char *c, int timeout)
-+{
-+ struct timeval tv;
-+ fd_set set;
-+
-+ tv.tv_sec = 0;
-+ tv.tv_usec = timeout * 1000;
-+
-+ FD_ZERO(&set);
-+ FD_SET(fd, &set);
-+
-+ if (!select(fd+1, &set, NULL, NULL, &tv)) return -1;
-+ if (read(fd, c, 1) != 1) return -1;
-+
-+ return 0;
-+}
-+
-+
-+
-+void setline(int fd, int flags, int speed)
-+{
-+ struct termios t;
-+
-+ tcgetattr(fd, &t);
-+
-+ t.c_cflag = flags | CREAD | HUPCL | CLOCAL;
-+ t.c_iflag = IGNBRK | IGNPAR;
-+ t.c_oflag = 0;
-+ t.c_lflag = 0;
-+ t.c_cc[VMIN ] = 1;
-+ t.c_cc[VTIME] = 0;
-+
-+ cfsetispeed(&t, speed);
-+ cfsetospeed(&t, speed);
-+
-+ tcsetattr(fd, TCSANOW, &t);
-+}
-+
-+int logitech_command(int fd, char *c)
-+{
-+ int i;
-+ unsigned char d;
-+ for (i = 0; c[i]; i++) {
-+ write(fd, c + i, 1);
-+ if (readchar(fd, &d, 1000))
-+ return -1;
-+ if (c[i] != d)
-+ return -1;
-+ }
-+ return 0;
-+}
-+
-+int magellan_init(int fd, long *id, long *extra)
-+{
-+ write(fd, "m3\rpBB\rz\r", 9);
-+ return 0;
-+}
-+
-+int warrior_init(int fd, long *id, long *extra)
-+{
-+ if (logitech_command(fd, "*S")) return -1;
-+ setline(fd, CS8, B4800);
-+ return 0;
-+}
-+
-+int spaceball_waitchar(int fd, unsigned char c, unsigned char *d, int timeout)
-+{
-+ unsigned char b = 0;
-+
-+ while (!readchar(fd, &b, timeout)) {
-+ if (b == 0x0a) continue;
-+ *d++ = b;
-+ if (b == c) break;
-+ }
-+
-+ *d = 0;
-+
-+ return -(b != c);
-+}
-+
-+int spaceball_waitcmd(int fd, char c, char *d)
-+{
-+ int i;
-+
-+ for (i = 0; i < 8; i++) {
-+ if (spaceball_waitchar(fd, 0x0d, d, 1000))
-+ return -1;
-+ if (d[0] == c)
-+ return 0;
-+ }
-+
-+ return -1;
-+}
-+
-+int spaceball_cmd(int fd, char *c, char *d)
-+{
-+ int i;
-+
-+ for (i = 0; c[i]; i++)
-+ write(fd, c + i, 1);
-+ write(fd, "\r", 1);
-+
-+ i = spaceball_waitcmd(fd, toupper(c[0]), d);
-+
-+ return i;
-+}
-+
-+#define SPACEBALL_1003 1
-+#define SPACEBALL_2003B 3
-+#define SPACEBALL_2003C 4
-+#define SPACEBALL_3003C 7
-+#define SPACEBALL_4000FLX 8
-+#define SPACEBALL_4000FLX_L 9
-+
-+int spaceball_init(int fd, long *id, long *extra)
-+{
-+ char r[64];
-+
-+ if (spaceball_waitchar(fd, 0x11, r, 4000) ||
-+ spaceball_waitchar(fd, 0x0d, r, 1000))
-+ return -1;
-+
-+ if (spaceball_waitcmd(fd, '@', r))
-+ return -1;
-+
-+ if (strncmp("@1 Spaceball alive", r, 18))
-+ return -1;
-+
-+ if (spaceball_waitcmd(fd, '@', r))
-+ return -1;
-+
-+ if (spaceball_cmd(fd, "hm", r))
-+ return -1;
-+
-+ if (!strncmp("Hm2003B", r, 7))
-+ *id = SPACEBALL_2003B;
-+ if (!strncmp("Hm2003C", r, 7))
-+ *id = SPACEBALL_2003C;
-+ if (!strncmp("Hm3003C", r, 7))
-+ *id = SPACEBALL_3003C;
-+
-+ if (!strncmp("HvFirmware", r, 10)) {
-+
-+ if (spaceball_cmd(fd, "\"", r))
-+ return -1;
-+
-+ if (strncmp("\"1 Spaceball 4000 FLX", r, 21))
-+ return -1;
-+
-+ if (spaceball_waitcmd(fd, '"', r))
-+ return -1;
-+
-+ if (strstr(r, " L "))
-+ *id = SPACEBALL_4000FLX_L;
-+ else
-+ *id = SPACEBALL_4000FLX;
-+
-+ if (spaceball_waitcmd(fd, '"', r))
-+ return -1;
-+
-+ if (spaceball_cmd(fd, "YS", r))
-+ return -1;
-+
-+ if (spaceball_cmd(fd, "M", r))
-+ return -1;
-+
-+ return 0;
-+ }
-+
-+ if (spaceball_cmd(fd, "P@A@A", r) ||
-+ spaceball_cmd(fd, "FT@", r) ||
-+ spaceball_cmd(fd, "MSS", r))
-+ return -1;
-+
-+ return 0;
-+}
-+
-+int stinger_init(int fd, long *id, long *extra)
-+{
-+ int i;
-+ unsigned char c;
-+ unsigned char *response = "\r\n0600520058C272";
-+
-+ if (write(fd, " E5E5", 5) != 5) /* Enable command */
-+ return -1;
-+
-+ for (i = 0; i < 16; i++) /* Check for Stinger */
-+ if (readchar(fd, &c, 200) || (c != response[i]))
-+ return -1;
-+
-+ return 0;
-+}
-+
-+int mzp_init(int fd, long *id, long *extra)
-+{
-+ if (logitech_command(fd, "*X*q")) return -1;
-+ setline(fd, CS8, B9600);
-+ return 0;
-+}
-+
-+int newton_init(int fd, long *id, long *extra)
-+{
-+ int i;
-+ unsigned char c;
-+ unsigned char response[35] =
-+ { 0x16, 0x10, 0x02, 0x64, 0x5f, 0x69, 0x64, 0x00,
-+ 0x00, 0x00, 0x0c, 0x6b, 0x79, 0x62, 0x64, 0x61,
-+ 0x70, 0x70, 0x6c, 0x00, 0x00, 0x00, 0x01, 0x6e,
-+ 0x6f, 0x66, 0x6d, 0x00, 0x00, 0x00, 0x00, 0x10,
-+ 0x03, 0xdd, 0xe7 };
-+
-+ for (i = 0; i < 35; i++)
-+ if (readchar(fd, &c, 400) || (c != response[i]))
-+ return -1;
-+
-+ return 0;
-+}
-+
-+int twiddler_init(int fd, long *id, long *extra)
-+{
-+ unsigned char c[10];
-+ int count, line;
-+
-+ /* Turn DTR off, otherwise the Twiddler won't send any data. */
-+ if (ioctl(fd, TIOCMGET, &line)) return -1;
-+ line &= ~TIOCM_DTR;
-+ if (ioctl(fd, TIOCMSET, &line)) return -1;
-+
-+ /* Check whether the device on the serial line is the Twiddler.
-+ *
-+ * The Twiddler sends data packets of 5 bytes which have the following
-+ * properties: the MSB is 0 on the first and 1 on all other bytes, and
-+ * the high order nibble of the last byte is always 0x8.
-+ *
-+ * We read and check two of those 5 byte packets to be sure that we
-+ * are indeed talking to a Twiddler. */
-+
-+ /* Read at most 5 bytes until we find one with the MSB set to 0 */
-+ for (count = 0; count < 5; count++) {
-+ if (readchar(fd, c+0, 500)) return -1;
-+ if ((c[0] & 0x80) == 0) break;
-+ }
-+
-+ if (count == 5) {
-+ /* Could not find header byte in data stream */
-+ return -1;
-+ }
-+
-+ /* Read remaining 4 bytes plus the full next data packet */
-+ for (count = 1; count < 10; count++) {
-+ if (readchar(fd, c+count, 500)) return -1;
-+ }
-+
-+ /* Check whether the bytes of both data packets obey the rules */
-+ for (count = 1; count < 10; count++) {
-+ if ((count % 5 == 0 && (c[count] & 0x80) != 0)
-+ || (count % 5 == 4 && (c[count] & 0xF0) != 0x80)
-+ || (count % 5 != 0 && (c[count] & 0x80) != 0x80)) {
-+ /* Invalid byte in data packet */
-+ return -1;
-+ }
-+ }
-+
-+ return 0;
-+}
-+
-+int penmount_init(int fd, long *id, long *extra)
-+{
-+ unsigned char init_cmd[5] = { 0xF2, 0x00, 0x00, 0x00, 0x00 };
-+ unsigned char start_cmd[5] = { 0xF1, 0x00, 0x00, 0x00, 0x00 };
-+ unsigned char c[10];
-+ int count;
-+
-+ /* try to initialize device */
-+ if (write( fd, init_cmd, 5 ) != 5)
-+ return -1;
-+
-+ /* read the responce */
-+ for (count = 0; count < 5; count ++) {
-+ if (readchar(fd, c+0, 500)) return -1;
-+ if (c[0] == 0xf2) break;
-+ }
-+
-+ if (readchar(fd, c+1, 500)) return -1;
-+ if (c[1] != 0xd9) return -1;
-+
-+ if (readchar(fd, c+2, 500)) return -1;
-+ if (c[2] != 0x0a) return -1;
-+
-+ /* the device is present! start it! */
-+ if (write( fd, start_cmd, 5 ) != 5)
-+ return -1;
-+
-+ return 0;
-+}
-+
-+int dump_init(int fd, long *id, long *extra)
-+{
-+ unsigned char c, o = 0;
-+
-+ c = 0x80;
-+
-+ if (write(fd, &c, 1) != 1) /* Enable command */
-+ return -1;
-+
-+ while (1)
-+ if (!readchar(fd, &c, 1)) {
-+ printf("%02x (%c) ", c, ((c > 32) && (c < 127)) ? c : 'x');
-+ o = 1;
-+ } else {
-+ if (o) {
-+ printf("\n");
-+ o = 0;
-+ }
-+ }
-+}
-+
-+struct input_types {
-+ char name[16];
-+ char name2[16];
-+ int speed;
-+ int flags;
-+ unsigned long type;
-+ unsigned long id;
-+ unsigned long extra;
-+ int flush;
-+ int (*init)(int fd, long *id, long *extra);
-+};
-+
-+struct input_types input_types[] = {
-+
-+{ "--sunkbd", "-skb", B1200, CS8, SERIO_SUNKBD, 0, 0, 1, NULL },
-+{ "--lkkbd", "-lk", B4800, CS8|CSTOPB, SERIO_LKKBD, 0, 0, 1, NULL },
-+{ "--vsxxx-aa", "-vs", B4800, CS8|CSTOPB|PARENB|PARODD,SERIO_VSXXXAA, 0, 0, 1, NULL },
-+{ "--spaceorb", "-orb", B9600, CS8, SERIO_SPACEORB, 0, 0, 1, NULL },
-+{ "--spaceball", "-sbl", B9600, CS8, SERIO_SPACEBALL,0, 0, 0, spaceball_init },
-+{ "--magellan", "-mag", B9600, CS8 | CSTOPB | CRTSCTS, SERIO_MAGELLAN, 0, 0, 1, magellan_init },
-+{ "--warrior", "-war", B1200, CS7 | CSTOPB, SERIO_WARRIOR, 0, 0, 1, warrior_init },
-+{ "--stinger", "-sting", B1200, CS8, SERIO_STINGER, 0, 0, 1, stinger_init },
-+{ "--mousesystems", "-msc", B1200, CS8, SERIO_MSC, 0, 0x01, 1, NULL },
-+{ "--sunmouse", "-sun", B1200, CS8, SERIO_SUN, 0, 0x01, 1, NULL },
-+{ "--microsoft", "-bare", B1200, CS7, SERIO_MS, 0, 0, 1, NULL },
-+{ "--mshack", "-ms", B1200, CS7, SERIO_MS, 0, 0x01, 1, NULL },
-+{ "--mouseman", "-mman", B1200, CS7, SERIO_MP, 0, 0x01, 1, NULL },
-+{ "--intellimouse", "-ms3", B1200, CS7, SERIO_MZ, 0, 0x11, 1, NULL },
-+{ "--mmwheel", "-mmw", B1200, CS7 | CSTOPB, SERIO_MZP, 0, 0x13, 1, mzp_init },
-+{ "--iforce", "-ifor", B38400, CS8, SERIO_IFORCE, 0, 0, 0, NULL },
-+{ "--newtonkbd", "-newt", B9600, CS8, SERIO_NEWTON, 0, 0, 0, newton_init },
-+{ "--h3600ts", "-ipaq", B115200, CS8, SERIO_H3600, 0, 0, 0, NULL },
-+{ "--stowawaykbd", "-ipaqkbd", B115200, CS8, SERIO_STOWAWAY, 0, 0, 0, NULL },
-+{ "--ps2serkbd", "-ps2ser", B1200, CS8, SERIO_PS2SER, 0, 0, 1, NULL },
-+{ "--twiddler", "-twid", B2400, CS8, SERIO_TWIDKBD, 0, 0, 0, twiddler_init },
-+{ "--twiddler-joy", "-twidjoy", B2400, CS8, SERIO_TWIDJOY, 0, 0, 0, twiddler_init },
-+{ "--elotouch", "-elo", B9600, CS8 | CRTSCTS, SERIO_ELO, 0, 0, 0, NULL },
-+{ "--elo4002", "-elo6b", B9600, CS8 | CRTSCTS, SERIO_ELO, 1, 0, 0, NULL },
-+{ "--elo271-140", "-elo4b", B9600, CS8 | CRTSCTS, SERIO_ELO, 2, 0, 0, NULL },
-+{ "--elo261-280", "-elo3b", B9600, CS8 | CRTSCTS, SERIO_ELO, 3, 0, 0, NULL },
-+{ "--dump", "-dump", B2400, CS8, 0, 0, 0, 0, dump_init },
-+{ "--dmc9000", "-dmc", B19200, CS8, SERIO_PENMOUNT, 0, 0, 0, penmount_init },
-+{ "", "", 0, 0 }
-+
-+};
-+
-+int main(int argc, char **argv)
-+{
-+ unsigned long devt;
-+ int ldisc;
-+ int type;
-+ long id, extra;
-+ int fd;
-+ char c;
-+
-+ if (argc < 2 || argc > 3 || !strcmp("--help", argv[1])) {
-+ puts("");
-+ puts("Usage: inputttach <mode> <device>");
-+ puts("");
-+ puts("Modes:");
-+ puts(" --sunkbd -skb Sun Type 4 and Type 5 keyboards");
-+ puts(" --lkkbd -lk DEC LK201 / LK401 keyboards");
-+ puts(" --vsxxx-aa -vs DEC VSXXX-AA / VSXXX-GA mouse and VSXXX-AB tablet");
-+ puts(" --spaceorb -orb SpaceOrb 360 / SpaceBall Avenger");
-+ puts(" --spaceball -sbl SpaceBall 2003 / 3003 / 4000 FLX");
-+ puts(" --magellan -mag Magellan / SpaceMouse");
-+ puts(" --warrior -war WingMan Warrior");
-+ puts(" --stinger -stng Gravis Stinger");
-+ puts(" --mousesystems -msc 3-button Mouse Systems mice");
-+ puts(" --sunmouse -sun 3-button Sun mice");
-+ puts(" --microsoft -bare 2-button Microsoft mice");
-+ puts(" --mshack -ms 3-button mice in Microsoft mode");
-+ puts(" --mouseman -mman 3-button Logitech and Genius mice");
-+ puts(" --intellimouse -ms3 Microsoft IntelliMouse");
-+ puts(" --mmwheel -mmw Logitech mice with 4-5 buttons or wheel");
-+ puts(" --iforce -ifor I-Force joysticks and wheels");
-+ puts(" --h3600ts -ipaq Ipaq h3600 touchscreen");
-+ puts(" --stowawaykbd -ipaqkbd Stowaway keyboard");
-+ puts(" --ps2serkbd -ps2ser PS/2 via serial keyboard");
-+ puts(" --twiddler -twid Handykey Twiddler chording keyboard");
-+ puts(" --twiddler-joy -twidjoy Handykey Twiddler used as a joystick");
-+ puts(" --dmc9000 -dmc DMC9000/Penpount touchscreen");
-+ puts("");
-+ return 1;
-+ }
-+
-+ for (type = 0; input_types[type].speed; type++) {
-+ if (!strncasecmp(argv[1], input_types[type].name, 16) ||
-+ !strncasecmp(argv[1], input_types[type].name2, 16))
-+ break;
-+ }
-+
-+ if (!input_types[type].speed) {
-+ fprintf(stderr, "inputattach: invalid mode\n");
-+ return 1;
-+ }
-+
-+ if ((fd = open(argv[2], O_RDWR | O_NOCTTY | O_NONBLOCK)) < 0) {
-+ perror("inputattach");
-+ return 1;
-+ }
-+
-+ setline(fd, input_types[type].flags, input_types[type].speed);
-+
-+ if (input_types[type].flush)
-+ while (!readchar(fd, &c, 100));
-+
-+ id = input_types[type].id;
-+ extra = input_types[type].extra;
-+
-+ if (input_types[type].init && input_types[type].init(fd, &id, &extra)) {
-+ fprintf(stderr, "inputattach: device initialization failed\n");
-+ return 1;
-+ }
-+
-+ ldisc = N_MOUSE;
-+ if(ioctl(fd, TIOCSETD, &ldisc)) {
-+ fprintf(stderr, "inputattach: can't set line discipline\n");
-+ return 1;
-+ }
-+
-+ devt = input_types[type].type | (id << 8) | (extra << 16);
-+
-+ if(ioctl(fd, SPIOCSTYPE, &devt)) {
-+ fprintf(stderr, "inputattach: can't set device type\n");
-+ return 1;
-+ }
-+
-+ read(fd, NULL, 0);
-+
-+ ldisc = 0;
-+ ioctl(fd, TIOCSETD, &ldisc);
-+ close(fd);
-+
-+ return 0;
-+}
-diff -Naur tslib-org/tests/ts_finddev.c tslib-1.0/tests/ts_finddev.c
---- tslib-org/tests/ts_finddev.c 1970-01-01 02:00:00.000000000 +0200
-+++ tslib-1.0/tests/ts_finddev.c 2007-05-07 17:36:37.000000000 +0300
-@@ -0,0 +1,75 @@
-+/*
-+ * tslib/src/ts_print.c
-+ *
-+ * Derived from tslib/src/ts_test.c by Douglas Lowder
-+ * Just prints touchscreen events -- does not paint them on framebuffer
-+ *
-+ * This file is placed under the GPL. Please see the file
-+ * COPYING for more details.
-+ *
-+ * Basic test program for touchscreen library.
-+ */
-+#include <stdio.h>
-+#include <stdlib.h>
-+#include <signal.h>
-+#include <sys/fcntl.h>
-+#include <sys/ioctl.h>
-+#include <sys/mman.h>
-+#include <sys/time.h>
-+#include <sys/types.h>
-+#include <unistd.h>
-+
-+#include "tslib.h"
-+
-+void usage( int argc, char** argv ) {
-+ printf( "Usage: %s device_name wait_for_sec\n", argv[0] );
-+ printf( "\tdevice_name - tdevice to probe, example /dev/input/event0\n" );
-+ printf( "\twait_for_sec - wait seconds for touch event, if 0 - dont wait!\n" );
-+ printf( "\tReturn codes:\n" );
-+ printf( "\t 0 - timeout expired without receiving event.\n" );
-+ printf( "\t But this maybe is TouchScreen.\n" );
-+ printf( "\t -1 - this is NOT TouchScreen device!\n" );
-+ printf( "\t 1 - this is TouchScreen for shure!\n" );
-+ exit(-1);
-+}
-+
-+void alarm_handler( int sig ) {
-+ // time is expired!
-+ exit(0);
-+}
-+
-+int main( int argc, char** argv )
-+{
-+ struct tsdev *ts;
-+ struct ts_sample samp;
-+ char *tsdevice=NULL;
-+ int waitsec;
-+ int ret;
-+
-+ if (argc != 3)
-+ usage( argc, argv );
-+
-+ tsdevice = argv[1];
-+ waitsec = atoi( argv[2] );
-+ if (waitsec < 0)
-+ usage( argc, argv );
-+
-+ ts = ts_open( tsdevice, 0 );
-+ if (!ts)
-+ return -1;
-+ if (ts_config(ts))
-+ return -1;
-+
-+ if (!waitsec) {
-+ return 0;
-+ }
-+
-+ printf( "Probe device %s, Please Touch Screen Anywhere in %i seconds! ... \n", tsdevice, waitsec );
-+ signal( SIGALRM, alarm_handler );
-+ alarm( waitsec );
-+ ret = ts_read_raw(ts, &samp, 1 );
-+ if (ret)
-+ return 1;
-+
-+ return -1;
-+}
@@ -1,2 +1,2 @@
# Locally generated
-sha256 121750e9ae0f05ce840ab8dbefdae1297258f0a69dd1967f55c40ac6e87d5ee9 tslib-1.1.tar.gz
+sha256 b6450f4d1bc8f4fbbb796a2d1210aee3ccf9ecf302a368dddf279c63eb634833 tslib-1.2.tar.gz
@@ -4,7 +4,7 @@
#
################################################################################
-TSLIB_VERSION = 1.1
+TSLIB_VERSION = 1.2
TSLIB_SITE = https://github.com/kergoth/tslib/releases/download/$(TSLIB_VERSION)
TSLIB_LICENSE = GPL, LGPL
TSLIB_LICENSE_FILES = COPYING
* The first patch is removed because the input-raw plugin is now enabled in tslib's provided ts.conf * The second patch added 2 programs to tslib. The whole patch is removed because: - ts_finddev is now part of tslib. - inputattach is part of the 'Linux console project' located here: https://sourceforge.net/projects/linuxconsole/ Signed-off-by: Martin Kepplinger <martink@posteo.de> --- If we want to keep the inputattach program, wouldn't it be the more correct way to include that 'Linux console project' in buildroot? Alternatively, I could come up with a new version of this patch, including only inputattach here again. (at least an updated version of it. that project is actively maintained.) thanks martin package/tslib/0001-enable_raw_module.patch | 14 - .../0002-add_finddef_and_inputattach_utils.patch | 718 --------------------- package/tslib/tslib.hash | 2 +- package/tslib/tslib.mk | 2 +- 4 files changed, 2 insertions(+), 734 deletions(-) delete mode 100644 package/tslib/0001-enable_raw_module.patch delete mode 100644 package/tslib/0002-add_finddef_and_inputattach_utils.patch