diff mbox

[U-Boot,11/15] drivers/phy: marvell: Add support for the slave CP COMPHY device

Message ID 20161115090831.8426-11-sr@denx.de
State Accepted
Commit e8c3156e8da94bd8ee651385cdd76bb7f842731e
Delegated to: Stefan Roese
Headers show

Commit Message

Stefan Roese Nov. 15, 2016, 9:08 a.m. UTC 
With the support for the Armada 8k, a 2nd COMPHY controller now needs
to get supported from the CP110 slave controller. This patch adds support
for this 2nd contoller in the COMPHY driver.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Nadav Haklai <nadavh@marvell.com>
Cc: Neta Zur Hershkovits <neta@marvell.com>
Cc: Kostya Porotchkin <kostap@marvell.com>
Cc: Omri Itach <omrii@marvell.com>
Cc: Igal Liberman <igall@marvell.com>
Cc: Haim Boot <hayim@marvell.com>
Cc: Hanna Hawa <hannah@marvell.com>
---
 drivers/phy/marvell/comphy.h      |  2 +-
 drivers/phy/marvell/comphy_core.c | 15 +++++++++++++--
 2 files changed, 14 insertions(+), 3 deletions(-)
diff mbox

Patch

diff --git a/drivers/phy/marvell/comphy.h b/drivers/phy/marvell/comphy.h
index df5b7d5..0a15692 100644
--- a/drivers/phy/marvell/comphy.h
+++ b/drivers/phy/marvell/comphy.h
@@ -69,7 +69,7 @@ 
 	(0x3 << DFX_DEV_GEN_PCIE_CLK_SRC_OFFSET)
 
 #define MAX_LANE_OPTIONS			10
-#define MAX_UTMI_PHY_COUNT			2
+#define MAX_UTMI_PHY_COUNT			3
 
 struct comphy_mux_options {
 	u32 type;
diff --git a/drivers/phy/marvell/comphy_core.c b/drivers/phy/marvell/comphy_core.c
index 651397d..bc2508b 100644
--- a/drivers/phy/marvell/comphy_core.c
+++ b/drivers/phy/marvell/comphy_core.c
@@ -112,6 +112,7 @@  static int comphy_probe(struct udevice *dev)
 	struct comphy_map comphy_map_data[MAX_LANE_OPTIONS];
 	int subnode;
 	int lane;
+	int last_idx = 0;
 
 	/* Save base addresses for later use */
 	chip_cfg->comphy_base_addr = (void *)dev_get_addr_index(dev, 0);
@@ -178,10 +179,20 @@  static int comphy_probe(struct udevice *dev)
 	/* PHY power UP sequence */
 	chip_cfg->ptr_comphy_chip_init(chip_cfg, comphy_map_data);
 	/* PHY print SerDes status */
+	if (of_machine_is_compatible("marvell,armada8040"))
+		printf("Comphy chip #%d:\n", chip_cfg->comphy_index);
 	comphy_print(chip_cfg, comphy_map_data);
 
-	/* Initialize dedicated PHYs (not muxed SerDes lanes) */
-	comphy_dedicated_phys_init();
+	/*
+	 * Only run the dedicated PHY init code once, in the last PHY init call
+	 */
+	if (of_machine_is_compatible("marvell,armada8040"))
+		last_idx = 1;
+
+	if (chip_cfg->comphy_index == last_idx) {
+		/* Initialize dedicated PHYs (not muxed SerDes lanes) */
+		comphy_dedicated_phys_init();
+	}
 
 	return 0;
 }