@@ -65,8 +65,8 @@ _FIT(Firmware Interface Table)
The detailed definition of the structure can be found at ACPI 6.0: 5.2.25
NVDIMM Firmware Interface Table (NFIT).
-QEMU NVDIMM Implemention
-========================
+QEMU NVDIMM Implementation
+==========================
QEMU uses 4 bytes IO Port starting from 0x0a18 and a RAM-based memory page
for NVDIMM ACPI.
@@ -80,8 +80,17 @@ Memory:
emulates _DSM access and writes the output data to it.
ACPI writes _DSM Input Data (based on the offset in the page):
- [0x0 - 0x3]: 4 bytes, NVDIMM Device Handle, 0 is reserved for NVDIMM
- Root device.
+ [0x0 - 0x3]: 4 bytes, NVDIMM Device Handle.
+
+ The handle is completely QEMU internal thing, the values in
+ range [1, 0xFFFF] indicate nvdimm device. Other values are
+ reserved for other purposes.
+
+ Reserved handles:
+ 0 is reserved for nvdimm root device named NVDR.
+ 0x10000 is reserved for QEMU internal DSM function called on
+ the root device.
+
[0x4 - 0x7]: 4 bytes, Revision ID, that is the Arg1 of _DSM method.
[0x8 - 0xB]: 4 bytes. Function Index, that is the Arg2 of _DSM method.
[0xC - 0xFFF]: 4084 bytes, the Arg3 of _DSM method.
@@ -132,28 +141,12 @@ NVDIMM hotplug
ACPI BIOS GPE.4 handler is dedicated for notifying OS about nvdimm device
hot-add event.
-Device Handle Reservation
--------------------------
-As we mentioned above, byte 0 ~ byte 3 in the DSM memory save NVDIMM device
-handle. The handle is completely QEMU internal thing, the values in range
-[0, 0xFFFF] indicate nvdimm device (O means nvdimm root device named NVDR),
-other values are reserved by other purpose.
-
-Current reserved handle:
-0x10000 is reserved for QEMU internal DSM function called on the root
-device.
-
QEMU internal use only _DSM function
------------------------------------
-UUID, 648B9CF2-CDA1-4312-8AD9-49C4AF32BD62, is reserved for QEMU internal
-DSM function.
-
-There is the function introduced by QEMU and only used by QEMU internal.
-
1) Read FIT
- As we only reserved one page for NVDIMM ACPI it is impossible to map the
- whole FIT data to guest's address space. This function is used by _FIT
- method to read a piece of FIT data from QEMU.
+ _FIT method uses _DSM method to fetch NFIT structures blob from QEMU
+ in 1 page sized increments which are then concatenated and returned
+ as _FIT method result.
Input parameters:
Arg0 – UUID {set to 648B9CF2-CDA1-4312-8AD9-49C4AF32BD62}
@@ -161,29 +154,34 @@ There is the function introduced by QEMU and only used by QEMU internal.
Arg2 - Function Index, 0x1
Arg3 - A package containing a buffer whose layout is as follows:
- +----------+-------------+-------------+-----------------------------------+
- | Filed | Byte Length | Byte Offset | Description |
- +----------+-------------+-------------+-----------------------------------+
- | offset | 4 | 0 | the offset of FIT buffer |
- +----------+-------------+-------------+-----------------------------------+
-
- Output:
- +----------+-------------+-------------+-----------------------------------+
- | Filed | Byte Length | Byte Offset | Description |
- +----------+-------------+-------------+-----------------------------------+
- | | | | return status codes |
- | | | | 0x100 indicates fit has been |
- | status | 4 | 0 | updated |
- | | | | other follows Chapter 3 in DSM |
- | | | | Spec Rev1 |
- +----------+-------------+-------------+-----------------------------------+
- | fit data | Varies | 4 | FIT data |
- | | | | |
- +----------+-------------+-------------+-----------------------------------+
-
- The FIT offset is maintained by the caller itself, current offset plugs
- the length returned by the function is the next offset we should read.
- When all the FIT data has been read out, zero length is returned.
-
- If it returns 0x100, OSPM should restart to read FIT (read from offset 0
- again).
+ +----------+--------+--------+-------------------------------------------+
+ | Field | Length | Offset | Description |
+ +----------+--------+--------+-------------------------------------------+
+ | offset | 4 | 0 | offset in QEMU's NFIT structures blob to |
+ | | | | read from |
+ +----------+--------+--------+-------------------------------------------+
+
+ Output layout in the dsm memory page:
+ +----------+--------+--------+-------------------------------------------+
+ | Field | Length | Offset | Description |
+ +----------+--------+--------+-------------------------------------------+
+ | length | 4 | 0 | length of entire returned data |
+ | | | | (including this header) |
+ +----------+-----------------+-------------------------------------------+
+ | | | | return status codes |
+ | | | | 0x0 - success |
+ | | | | 0x100 - error caused by NFIT update while |
+ | status | 4 | 4 | read by _FIT wasn't completed, other |
+ | | | | codes follow Chapter 3 in DSM Spec Rev1 |
+ +----------+-----------------+-------------------------------------------+
+ | fit data | Varies | 8 | contains FIT data, this field is present |
+ | | | | if status field is 0; |
+ +----------+--------+--------+-------------------------------------------+
+
+ The FIT offset is maintained by the OSPM itself, current offset plus
+ the size of the fit data returned by the function is the next offset
+ OSPM should read. When all FIT data has been read out, zero fit data
+ size is returned.
+
+ If it returns status code 0x100, OSPM should restart to read FIT (read
+ from offset 0 again).