diff mbox

[U-Boot,v1] sama5d2_xplained: move CONFIG_SYS_NO_FLASH to default config files

Message ID 1478239124-22664-1-git-send-email-wenyou.yang@atmel.com
State Deferred
Delegated to: Andreas Bießmann
Headers show

Commit Message

Wenyou Yang Nov. 4, 2016, 5:58 a.m. UTC 
Move CONFIG_SYS_NO_FLASH symbol to the default config files, such as,
configs/sama5d2_xplained_*_defconfig.

Signed-off-by: Wenyou Yang <wenyou.yang@atmel.com>
---

 configs/sama5d2_xplained_mmc_defconfig      | 9 ++++-----
 configs/sama5d2_xplained_spiflash_defconfig | 7 +++----
 include/configs/sama5d2_xplained.h          | 3 ---
 3 files changed, 7 insertions(+), 12 deletions(-)
diff mbox

Patch

diff --git a/configs/sama5d2_xplained_mmc_defconfig b/configs/sama5d2_xplained_mmc_defconfig
index 8a786f1..b63787a 100644
--- a/configs/sama5d2_xplained_mmc_defconfig
+++ b/configs/sama5d2_xplained_mmc_defconfig
@@ -8,12 +8,11 @@  CONFIG_SPL_FAT_SUPPORT=y
 CONFIG_SPL_LIBDISK_SUPPORT=y
 CONFIG_SPL_MMC_SUPPORT=y
 CONFIG_SPL_SERIAL_SUPPORT=y
-CONFIG_DM_GPIO=y
-CONFIG_DM_SERIAL=y
 CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d2_xplained"
 CONFIG_FIT=y
 CONFIG_SYS_EXTRA_OPTIONS="SAMA5D2,SYS_USE_MMC"
 CONFIG_BOOTDELAY=3
+CONFIG_SYS_NO_FLASH=y
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_SPL=y
 CONFIG_HUSH_PARSER=y
@@ -34,24 +33,24 @@  CONFIG_OF_CONTROL=y
 CONFIG_SPL_OF_CONTROL=y
 CONFIG_DM=y
 CONFIG_SPL_DM=y
-CONFIG_BLK=y
 CONFIG_CLK=y
 CONFIG_SPL_CLK=y
 CONFIG_CLK_AT91=y
 CONFIG_AT91_UTMI=y
 CONFIG_AT91_H32MX=y
 CONFIG_AT91_GENERIC_CLK=y
+CONFIG_DM_GPIO=y
 CONFIG_ATMEL_PIO4=y
 CONFIG_DM_I2C=y
 CONFIG_SYS_I2C_AT91=y
 CONFIG_DM_MMC=y
-CONFIG_DM_MMC_OPS=y
 CONFIG_ATMEL_SDHCI=y
 CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_ATMEL=y
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_AT91PIO4=y
+CONFIG_DM_SERIAL=y
 CONFIG_DEBUG_UART=y
 CONFIG_DEBUG_UART_ATMEL=y
 CONFIG_DEBUG_UART_BASE=0xf8020000
@@ -62,8 +61,8 @@  CONFIG_ATMEL_USART=y
 CONFIG_DM_SPI=y
 CONFIG_ATMEL_SPI=y
 CONFIG_USB=y
-CONFIG_USB_STORAGE=y
 CONFIG_DM_USB=y
 CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_STORAGE=y
 CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_ATMEL_USBA=y
diff --git a/configs/sama5d2_xplained_spiflash_defconfig b/configs/sama5d2_xplained_spiflash_defconfig
index 51594e7..74e661d 100644
--- a/configs/sama5d2_xplained_spiflash_defconfig
+++ b/configs/sama5d2_xplained_spiflash_defconfig
@@ -7,12 +7,11 @@  CONFIG_SPL_LIBGENERIC_SUPPORT=y
 CONFIG_SPL_SERIAL_SUPPORT=y
 CONFIG_SPL_SPI_FLASH_SUPPORT=y
 CONFIG_SPL_SPI_SUPPORT=y
-CONFIG_DM_GPIO=y
-CONFIG_DM_SERIAL=y
 CONFIG_DEFAULT_DEVICE_TREE="at91-sama5d2_xplained"
 CONFIG_FIT=y
 CONFIG_SYS_EXTRA_OPTIONS="SAMA5D2,SYS_USE_SERIALFLASH"
 CONFIG_BOOTDELAY=3
+CONFIG_SYS_NO_FLASH=y
 # CONFIG_DISPLAY_BOARDINFO is not set
 CONFIG_SPL=y
 CONFIG_HUSH_PARSER=y
@@ -33,24 +32,24 @@  CONFIG_OF_CONTROL=y
 CONFIG_SPL_OF_CONTROL=y
 CONFIG_DM=y
 CONFIG_SPL_DM=y
-CONFIG_BLK=y
 CONFIG_CLK=y
 CONFIG_SPL_CLK=y
 CONFIG_CLK_AT91=y
 CONFIG_AT91_UTMI=y
 CONFIG_AT91_H32MX=y
 CONFIG_AT91_GENERIC_CLK=y
+CONFIG_DM_GPIO=y
 CONFIG_ATMEL_PIO4=y
 CONFIG_DM_I2C=y
 CONFIG_SYS_I2C_AT91=y
 CONFIG_DM_MMC=y
-CONFIG_DM_MMC_OPS=y
 CONFIG_ATMEL_SDHCI=y
 CONFIG_DM_SPI_FLASH=y
 CONFIG_SPI_FLASH=y
 CONFIG_SPI_FLASH_ATMEL=y
 CONFIG_PINCTRL=y
 CONFIG_PINCTRL_AT91PIO4=y
+CONFIG_DM_SERIAL=y
 CONFIG_DEBUG_UART=y
 CONFIG_DEBUG_UART_ATMEL=y
 CONFIG_DEBUG_UART_BASE=0xf8020000
diff --git a/include/configs/sama5d2_xplained.h b/include/configs/sama5d2_xplained.h
index f694645..ce530ea 100644
--- a/include/configs/sama5d2_xplained.h
+++ b/include/configs/sama5d2_xplained.h
@@ -10,9 +10,6 @@ 
 #ifndef __CONFIG_H
 #define __CONFIG_H
 
-/* No NOR flash, this definition should put before common header */
-#define CONFIG_SYS_NO_FLASH
-
 #include "at91-sama5_common.h"
 
 #define CONFIG_BOARD_EARLY_INIT_F