diff mbox

[U-Boot,11/11] sunxi: Add support for Cubieboard4

Message ID 20161028102138.8678-12-wens@csie.org
State Accepted
Commit fda9d5d327302e2e5a45ade25e88edc0002336ec
Delegated to: Hans de Goede
Headers show

Commit Message

Chen-Yu Tsai Oct. 28, 2016, 10:21 a.m. UTC 
The Cubieboard4 is an A80 SoC based development board from Cubietech.

This board has a UART port, 4 USB host ports, a USB 3.0 OTG connector,
HDMI and VGA outputs, a micro SD slot, 8G eMMC flash, 2G DRAM, a WiFi/BT
combo chip, headphone and microphone jacks, IR receiver, and GPIO headers.

Signed-off-by: Chen-Yu Tsai <wens@csie.org>
---
 board/sunxi/MAINTAINERS       |  5 +++++
 configs/Cubieboard4_defconfig | 18 ++++++++++++++++++
 2 files changed, 23 insertions(+)
 create mode 100644 configs/Cubieboard4_defconfig
diff mbox

Patch

diff --git a/board/sunxi/MAINTAINERS b/board/sunxi/MAINTAINERS
index 6e0aa24eb859..df05b3284807 100644
--- a/board/sunxi/MAINTAINERS
+++ b/board/sunxi/MAINTAINERS
@@ -122,6 +122,11 @@  F:	include/configs/sun7i.h
 F:	configs/Cubieboard2_defconfig
 F:	configs/Cubietruck_defconfig
 
+CUBIEBOARD4 BOARD
+M:	Chen-Yu Tsai <wens@csie.org>
+S:	Maintained
+F:	configs/Cubieboard4_defconfig
+
 CUBIETRUCK-PLUS BOARD
 M:	Chen-Yu Tsai <wens@csie.org>
 S:	Maintained
diff --git a/configs/Cubieboard4_defconfig b/configs/Cubieboard4_defconfig
new file mode 100644
index 000000000000..4d36d39e5974
--- /dev/null
+++ b/configs/Cubieboard4_defconfig
@@ -0,0 +1,18 @@ 
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_MACH_SUN9I=y
+CONFIG_DRAM_CLK=672
+CONFIG_MMC0_CD_PIN="PH18"
+CONFIG_MMC_SUNXI_SLOT_EXTRA=2
+CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE"
+CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT"
+CONFIG_USB0_ID_DET="PH16"
+CONFIG_USB1_VBUS_PIN="PH14"
+CONFIG_USB3_VBUS_PIN="PH15"
+CONFIG_AXP_GPIO=y
+CONFIG_DEFAULT_DEVICE_TREE="sun9i-a80-cubieboard4"
+CONFIG_SPL=y
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_FPGA is not set
+CONFIG_AXP809_POWER=y