diff mbox

[U-Boot,3/4] colibri_vf: cleanup USB clock initialization

Message ID 20161028002548.23891-4-stefan@agner.ch
State Accepted
Commit 9e73c1b7d11611d51f0026d375731f0316dd26e8
Delegated to: Stefano Babic
Headers show

Commit Message

Stefan Agner Oct. 28, 2016, 12:25 a.m. UTC 
From: Stefan Agner <stefan.agner@toradex.com>

Use the same preprocessor define to enable clocks as we use to
enable the driver. Make sure that the necessary PLL's are on
(they get enabled by boot ROM by default, so this is more for
completness).

Signed-off-by: Stefan Agner <stefan.agner@toradex.com>
---

 board/toradex/colibri_vf/colibri_vf.c | 14 ++++++++++----
 1 file changed, 10 insertions(+), 4 deletions(-)
diff mbox

Patch

diff --git a/board/toradex/colibri_vf/colibri_vf.c b/board/toradex/colibri_vf/colibri_vf.c
index 0f8b440..15f263c 100644
--- a/board/toradex/colibri_vf/colibri_vf.c
+++ b/board/toradex/colibri_vf/colibri_vf.c
@@ -368,12 +368,18 @@  static void clock_init(void)
 	clrsetbits_le32(&ccm->ccgr10, CCM_REG_CTRL_MASK,
 			CCM_CCGR10_NFC_CTRL_MASK);
 
-#ifdef CONFIG_CI_UDC
+#ifdef CONFIG_USB_EHCI_VF
 	setbits_le32(&ccm->ccgr1, CCM_CCGR1_USBC0_CTRL_MASK);
-#endif
-
-#ifdef CONFIG_USB_EHCI
 	setbits_le32(&ccm->ccgr7, CCM_CCGR7_USBC1_CTRL_MASK);
+
+	clrsetbits_le32(&anadig->pll3_ctrl, ANADIG_PLL3_CTRL_BYPASS |
+			ANADIG_PLL3_CTRL_POWERDOWN |
+			ANADIG_PLL3_CTRL_DIV_SELECT,
+			ANADIG_PLL3_CTRL_ENABLE);
+	clrsetbits_le32(&anadig->pll7_ctrl, ANADIG_PLL7_CTRL_BYPASS |
+			ANADIG_PLL7_CTRL_POWERDOWN |
+			ANADIG_PLL7_CTRL_DIV_SELECT,
+			ANADIG_PLL7_CTRL_ENABLE);
 #endif
 
 	clrsetbits_le32(&anadig->pll5_ctrl, ANADIG_PLL5_CTRL_BYPASS |