[3/5] ARC: MCIP: Use hwirq instead of virq for resolution of IDU IRQ handlers
diff mbox

Message ID 1477088131-15822-3-git-send-email-yuriy.kolerov@synopsys.com
State New
Headers show

Commit Message

Yuriy Kolerov Oct. 21, 2016, 10:15 p.m. UTC
Multicore ARC configurations use IDU (Interrupt Distribution Unit) for
distributing of common interrupts. In fact IDU is a interrupt controller
on top of main per core interrupt controller.

All common IRQs are physically and linearly mapped to per core
interrupts. E.g. <0, 1, 2, 3> common IDU interrupts may be mapped to per
core <24, 25, 26, 27> interrupts. An initialization code of IDU
controller (idu_of_init) creates mappings for all parent interrupts
<24, 25, ...> and sets a chained IDU handler for them. In the same
time idu_of_init must save the first met parent hwirq (idu_first_irq)
thus in future it is possible to figure out what common hwirq has come
by subtracting of idu_first_irq from the current parent hwirq (see

The problem is that idu_of_init and idu_cascade_isr use parent virtual
IRQs as hardware IRQs and perform all the above-described manipulations
on virtual IRQs. But it is wrong and hardware IRQs must be used instead.

Signed-off-by: Yuriy Kolerov <yuriy.kolerov@synopsys.com>
 arch/arc/kernel/mcip.c | 20 +++++++++-----------
 1 file changed, 9 insertions(+), 11 deletions(-)

diff mbox

diff --git a/arch/arc/kernel/mcip.c b/arch/arc/kernel/mcip.c
index 28ff766..51a218c 100644
--- a/arch/arc/kernel/mcip.c
+++ b/arch/arc/kernel/mcip.c
@@ -220,16 +220,14 @@  static struct irq_chip idu_irq_chip = {
-static int idu_first_irq;
+static irq_hw_number_t idu_first_hwirq;
 static void idu_cascade_isr(struct irq_desc *desc)
-	struct irq_domain *domain = irq_desc_get_handler_data(desc);
-	unsigned int core_irq = irq_desc_get_irq(desc);
-	unsigned int idu_irq;
-	idu_irq = core_irq - idu_first_irq;
-	generic_handle_irq(irq_find_mapping(domain, idu_irq));
+	struct irq_domain *idu_domain = irq_desc_get_handler_data(desc);
+	irq_hw_number_t core_hwirq = irqd_to_hwirq(irq_desc_get_irq_data(desc));
+	irq_hw_number_t idu_hwirq = core_hwirq - idu_first_hwirq;
+	generic_handle_irq(irq_find_mapping(idu_domain, idu_hwirq));
 static int idu_irq_map(struct irq_domain *d, unsigned int virq, irq_hw_number_t hwirq)
@@ -295,7 +293,7 @@  idu_of_init(struct device_node *intc, struct device_node *parent)
 	struct irq_domain *domain;
 	/* Read IDU BCR to confirm nr_irqs */
 	int nr_irqs = of_irq_count(intc);
-	int i, irq;
+	int i, virq;
 	if (!idu_detected)
 		panic("IDU not detected, but DeviceTree using it");
@@ -313,11 +311,11 @@  idu_of_init(struct device_node *intc, struct device_node *parent)
 		 * however we need it to get the parent virq and set IDU handler
 		 * as first level isr
-		irq = irq_of_parse_and_map(intc, i);
+		virq = irq_of_parse_and_map(intc, i);
 		if (!i)
-			idu_first_irq = irq;
+			idu_first_hwirq = irqd_to_hwirq(irq_get_irq_data(virq));
-		irq_set_chained_handler_and_data(irq, idu_cascade_isr, domain);
+		irq_set_chained_handler_and_data(virq, idu_cascade_isr, domain);
 	__mcip_cmd(CMD_IDU_ENABLE, 0);