diff mbox

[2/2] pinctrl: stm32: move gpio irqs binding to optional

Message ID 1476970012-7838-3-git-send-email-alexandre.torgue@st.com
State Not Applicable, archived
Headers show

Commit Message

Alexandre TORGUE Oct. 20, 2016, 1:26 p.m. UTC 
stm32 pinctrl driver could be probed even if no interrupt controller
is defined to manage gpio irqs. Entries related to gpio irq management
are moved to optional.

Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>

Comments

Linus Walleij Oct. 23, 2016, 11:56 p.m. UTC | #1 
On Thu, Oct 20, 2016 at 3:26 PM, Alexandre TORGUE
<alexandre.torgue@st.com> wrote:

> stm32 pinctrl driver could be probed even if no interrupt controller
> is defined to manage gpio irqs. Entries related to gpio irq management
> are moved to optional.
>
> Signed-off-by: Alexandre TORGUE <alexandre.torgue@st.com>

Patch applied for fixes.

Yours,
Linus Walleij
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt
index f9753c4..b24583a 100644
--- a/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt
+++ b/Documentation/devicetree/bindings/pinctrl/st,stm32-pinctrl.txt
@@ -14,11 +14,6 @@  Required properies:
  - #size-cells	: The value of this property must be 1
  - ranges	: defines mapping between pin controller node (parent) to
    gpio-bank node (children).
- - interrupt-parent: phandle of the interrupt parent to which the external
-   GPIO interrupts are forwarded to.
- - st,syscfg: Should be phandle/offset pair. The phandle to the syscon node
-   which includes IRQ mux selection register, and the offset of the IRQ mux
-   selection register.
  - pins-are-numbered: Specify the subnodes are using numbered pinmux to
    specify pins.
 
@@ -37,6 +32,11 @@  Required properties:
 
 Optional properties:
  - reset:	  : Reference to the reset controller
+ - interrupt-parent: phandle of the interrupt parent to which the external
+   GPIO interrupts are forwarded to.
+ - st,syscfg: Should be phandle/offset pair. The phandle to the syscon node
+   which includes IRQ mux selection register, and the offset of the IRQ mux
+   selection register.
 
 Example:
 #include <dt-bindings/pinctrl/stm32f429-pinfunc.h>