diff mbox

[v4,1/4] net: phy: dp83867: Add documentation for optional impedance control

Message ID 20161018112020.30273-2-mugunthanvnm@ti.com
State Accepted, archived
Delegated to: David Miller
Headers show

Commit Message

Mugunthan V N Oct. 18, 2016, 11:20 a.m. UTC 
Add documention of ti,min-output-impedance and ti,max-output-impedance
which can be used to correct MAC impedance mismatch using phy extended
registers.

Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
---
 Documentation/devicetree/bindings/net/ti,dp83867.txt | 12 ++++++++++++
 1 file changed, 12 insertions(+)
diff mbox

Patch

diff --git a/Documentation/devicetree/bindings/net/ti,dp83867.txt b/Documentation/devicetree/bindings/net/ti,dp83867.txt
index 5d21141..85bf945 100644
--- a/Documentation/devicetree/bindings/net/ti,dp83867.txt
+++ b/Documentation/devicetree/bindings/net/ti,dp83867.txt
@@ -9,6 +9,18 @@  Required properties:
 	- ti,fifo-depth - Transmitt FIFO depth- see dt-bindings/net/ti-dp83867.h
 		for applicable values
 
+Optional property:
+	- ti,min-output-impedance - MAC Interface Impedance control to set
+				    the programmable output impedance to
+				    minimum value (35 ohms).
+	- ti,max-output-impedance - MAC Interface Impedance control to set
+				    the programmable output impedance to
+				    maximum value (70 ohms).
+
+Note: ti,min-output-impedance and ti,max-output-impedance are mutually
+      exclusive. When both properties are present ti,max-output-impedance
+      takes precedence.
+
 Default child nodes are standard Ethernet PHY device
 nodes as described in Documentation/devicetree/bindings/net/phy.txt