@@ -1,13 +1,10 @@
config CLK_UNIPHIER
- bool
+ bool "Clock driver for UniPhier SoCs"
+ depends on ARCH_UNIPHIER
select CLK
select SPL_CLK
-
-menu "Clock drivers for UniPhier SoCs"
- depends on CLK_UNIPHIER
-
-config CLK_UNIPHIER_MIO
- bool "Clock driver for UniPhier Media I/O block"
default y
-
-endmenu
+ help
+ Support for clock controllers on UniPhier SoCs.
+ Say Y if you want to control clocks provided by System Control
+ block, Media I/O block, Peripheral Block.
@@ -1,3 +1,2 @@
-obj-y += clk-uniphier-core.o
-
-obj-$(CONFIG_CLK_UNIPHIER_MIO) += clk-uniphier-mio.o
+obj-y += clk-uniphier-core.o
+obj-y += clk-uniphier-mio.o
@@ -6,11 +6,11 @@
*/
#include <common.h>
+#include <clk-uclass.h>
+#include <dm/device.h>
#include <linux/bitops.h>
#include <linux/io.h>
#include <linux/sizes.h>
-#include <clk-uclass.h>
-#include <dm/device.h>
#include "clk-uniphier.h"
@@ -18,136 +18,106 @@
* struct uniphier_clk_priv - private data for UniPhier clock driver
*
* @base: base address of the clock provider
- * @socdata: SoC specific data
+ * @data: SoC specific data
*/
struct uniphier_clk_priv {
void __iomem *base;
- const struct uniphier_clk_soc_data *socdata;
+ const struct uniphier_clk_data *data;
};
-int uniphier_clk_probe(struct udevice *dev)
+static int uniphier_clk_enable(struct clk *clk)
{
- struct uniphier_clk_priv *priv = dev_get_priv(dev);
- fdt_addr_t addr;
+ struct uniphier_clk_priv *priv = dev_get_priv(clk->dev);
+ unsigned long id = clk->id;
+ const struct uniphier_clk_gate_data *p;
- addr = dev_get_addr(dev->parent);
- if (addr == FDT_ADDR_T_NONE)
- return -EINVAL;
+ for (p = priv->data->gate; p->id != UNIPHIER_CLK_ID_END; p++) {
+ u32 val;
- priv->base = devm_ioremap(dev, addr, SZ_4K);
- if (!priv->base)
- return -ENOMEM;
+ if (p->id != id)
+ continue;
- priv->socdata = (void *)dev_get_driver_data(dev);
+ val = readl(priv->base + p->reg);
+ val |= BIT(p->bit);
+ writel(val, priv->base + p->reg);
- return 0;
+ return 0;
+ }
+
+ dev_err(priv->dev, "clk_id=%lu was not handled\n", id);
+ return -EINVAL;
}
-static int uniphier_clk_enable(struct clk *clk)
+static const struct uniphier_clk_mux_data *
+uniphier_clk_get_mux_data(struct uniphier_clk_priv *priv, unsigned long id)
{
- struct uniphier_clk_priv *priv = dev_get_priv(clk->dev);
- const struct uniphier_clk_gate_data *gate = priv->socdata->gate;
- unsigned int nr_gate = priv->socdata->nr_gate;
- void __iomem *reg;
- u32 mask, data, tmp;
- int i;
-
- for (i = 0; i < nr_gate; i++) {
- if (gate[i].index != clk->id)
- continue;
-
- reg = priv->base + gate[i].reg;
- mask = gate[i].mask;
- data = gate[i].data & mask;
+ const struct uniphier_clk_mux_data *p;
- tmp = readl(reg);
- tmp &= ~mask;
- tmp |= data & mask;
- debug("%s: %p: %08x\n", __func__, reg, tmp);
- writel(tmp, reg);
+ for (p = priv->data->mux; p->id != UNIPHIER_CLK_ID_END; p++) {
+ if (p->id == id)
+ return p;
}
- return 0;
+ return NULL;
}
static ulong uniphier_clk_get_rate(struct clk *clk)
{
struct uniphier_clk_priv *priv = dev_get_priv(clk->dev);
- const struct uniphier_clk_rate_data *rdata = priv->socdata->rate;
- unsigned int nr_rdata = priv->socdata->nr_rate;
- void __iomem *reg;
- u32 mask, data;
- ulong matched_rate = 0;
+ const struct uniphier_clk_mux_data *mux;
+ u32 val;
int i;
- for (i = 0; i < nr_rdata; i++) {
- if (rdata[i].index != clk->id)
- continue;
+ mux = uniphier_clk_get_mux_data(priv, clk->id);
+ if (!mux)
+ return 0;
- if (rdata[i].reg == UNIPHIER_CLK_RATE_IS_FIXED)
- return rdata[i].rate;
-
- reg = priv->base + rdata[i].reg;
- mask = rdata[i].mask;
- data = rdata[i].data & mask;
- if ((readl(reg) & mask) == data) {
- if (matched_rate && rdata[i].rate != matched_rate) {
- printf("failed to get clk rate for insane register values\n");
- return -EINVAL;
- }
- matched_rate = rdata[i].rate;
- }
- }
+ if (!mux->nr_muxs) /* fixed-rate */
+ return mux->rates[0];
+
+ val = readl(priv->base + mux->reg);
- debug("%s: rate = %lu\n", __func__, matched_rate);
+ for (i = 0; i < mux->nr_muxs; i++)
+ if ((mux->masks[i] & val) == mux->vals[i])
+ return mux->rates[i];
- return matched_rate;
+ return -EINVAL;
}
static ulong uniphier_clk_set_rate(struct clk *clk, ulong rate)
{
struct uniphier_clk_priv *priv = dev_get_priv(clk->dev);
- const struct uniphier_clk_rate_data *rdata = priv->socdata->rate;
- unsigned int nr_rdata = priv->socdata->nr_rate;
- void __iomem *reg;
- u32 mask, data, tmp;
+ const struct uniphier_clk_mux_data *mux;
+ u32 val;
+ int i, best_rate_id = -1;
ulong best_rate = 0;
- int i;
- /* first, decide the best match rate */
- for (i = 0; i < nr_rdata; i++) {
- if (rdata[i].index != clk->id)
- continue;
+ mux = uniphier_clk_get_mux_data(priv, clk->id);
+ if (!mux)
+ return 0;
- if (rdata[i].reg == UNIPHIER_CLK_RATE_IS_FIXED)
- return 0;
+ if (!mux->nr_muxs) /* fixed-rate */
+ return mux->rates[0];
- if (rdata[i].rate > best_rate && rdata[i].rate <= rate)
- best_rate = rdata[i].rate;
+ /* first, decide the best match rate */
+ for (i = 0; i < mux->nr_muxs; i++) {
+ if (mux->rates[i] > best_rate && mux->rates[i] <= rate) {
+ best_rate = mux->rates[i];
+ best_rate_id = i;
+ }
}
- if (!best_rate)
- return -ENODEV;
+ if (best_rate_id < 0)
+ return -EINVAL;
+
+ val = readl(priv->base + mux->reg);
+ val &= ~mux->masks[best_rate_id];
+ val |= mux->vals[best_rate_id];
+ writel(val, priv->base + mux->reg);
debug("%s: requested rate = %lu, set rate = %lu\n", __func__,
rate, best_rate);
- /* second, really set registers */
- for (i = 0; i < nr_rdata; i++) {
- if (rdata[i].index != clk->id || rdata[i].rate != best_rate)
- continue;
-
- reg = priv->base + rdata[i].reg;
- mask = rdata[i].mask;
- data = rdata[i].data & mask;
-
- tmp = readl(reg);
- tmp &= ~mask;
- tmp |= data;
- debug("%s: %p: %08x\n", __func__, reg, tmp);
- writel(tmp, reg);
- }
-
return best_rate;
}
@@ -157,6 +127,24 @@ const struct clk_ops uniphier_clk_ops = {
.set_rate = uniphier_clk_set_rate,
};
+static int uniphier_clk_probe(struct udevice *dev)
+{
+ struct uniphier_clk_priv *priv = dev_get_priv(dev);
+ fdt_addr_t addr;
+
+ addr = dev_get_addr(dev->parent);
+ if (addr == FDT_ADDR_T_NONE)
+ return -EINVAL;
+
+ priv->base = devm_ioremap(dev, addr, SZ_4K);
+ if (!priv->base)
+ return -ENOMEM;
+
+ priv->data = (void *)dev_get_driver_data(dev);
+
+ return 0;
+}
+
static const struct udevice_id uniphier_clk_match[] = {
{
.compatible = "socionext,uniphier-sld3-mio-clock",
@@ -5,136 +5,81 @@
* SPDX-License-Identifier: GPL-2.0+
*/
-#include <dm/device.h>
-
#include "clk-uniphier.h"
-#define UNIPHIER_MIO_CLK_GATE_SD(ch, idx) \
- { \
- .index = (idx), \
- .reg = 0x20 + 0x200 * (ch), \
- .mask = 0x00000100, \
- .data = 0x00000100, \
- }, \
- { \
- .index = (idx), \
- .reg = 0x110 + 0x200 * (ch), \
- .mask = 0x00000001, \
- .data = 0x00000001, \
- }
+#define UNIPHIER_MIO_CLK_SD_GATE(id, ch) \
+ UNIPHIER_CLK_GATE((id), 0x20 + 0x200 * (ch), 8)
-#define UNIPHIER_MIO_CLK_RATE_SD(ch, idx) \
- { \
- .index = (idx), \
- .reg = 0x30 + 0x200 * (ch), \
- .mask = 0x00031300, \
- .data = 0x00000000, \
- .rate = 44444444, \
- }, \
- { \
- .index = (idx), \
- .reg = 0x30 + 0x200 * (ch), \
- .mask = 0x00031300, \
- .data = 0x00010000, \
- .rate = 33333333, \
- }, \
- { \
- .index = (idx), \
- .reg = 0x30 + 0x200 * (ch), \
- .mask = 0x00031300, \
- .data = 0x00020000, \
- .rate = 50000000, \
- }, \
- { \
- .index = (idx), \
- .reg = 0x30 + 0x200 * (ch), \
- .mask = 0x00031300, \
- .data = 0x00020000, \
- .rate = 66666666, \
- }, \
- { \
- .index = (idx), \
- .reg = 0x30 + 0x200 * (ch), \
- .mask = 0x00031300, \
- .data = 0x00001000, \
- .rate = 100000000, \
- }, \
- { \
- .index = (idx), \
- .reg = 0x30 + 0x200 * (ch), \
- .mask = 0x00031300, \
- .data = 0x00001100, \
- .rate = 40000000, \
- }, \
- { \
- .index = (idx), \
- .reg = 0x30 + 0x200 * (ch), \
- .mask = 0x00031300, \
- .data = 0x00001200, \
- .rate = 25000000, \
- }, \
- { \
- .index = (idx), \
- .reg = 0x30 + 0x200 * (ch), \
- .mask = 0x00031300, \
- .data = 0x00001300, \
- .rate = 22222222, \
- }
+#define UNIPHIER_MIO_CLK_USB2(id, ch) \
+ UNIPHIER_CLK_GATE((id), 0x20 + 0x200 * (ch), 28)
-#define UNIPHIER_MIO_CLK_GATE_USB(ch, idx) \
- { \
- .index = (idx), \
- .reg = 0x20 + 0x200 * (ch), \
- .mask = 0x30000000, \
- .data = 0x30000000, \
- }, \
- { \
- .index = (idx), \
- .reg = 0x110 + 0x200 * (ch), \
- .mask = 0x01000000, \
- .data = 0x01000000, \
- }, \
- { \
- .index = (idx), \
- .reg = 0x114 + 0x200 * (ch), \
- .mask = 0x00000001, \
- .data = 0x00000001, \
- }
+#define UNIPHIER_MIO_CLK_USB2_PHY(id, ch) \
+ UNIPHIER_CLK_GATE((id), 0x20 + 0x200 * (ch), 29)
+
+#define UNIPHIER_MIO_CLK_DMAC(id) \
+ UNIPHIER_CLK_GATE((id), 0x20, 25)
-#define UNIPHIER_MIO_CLK_GATE_DMAC(idx) \
- { \
- .index = (idx), \
- .reg = 0x20, \
- .mask = 0x02000000, \
- .data = 0x02000000, \
- }, \
- { \
- .index = (idx), \
- .reg = 0x110, \
- .mask = 0x00020000, \
- .data = 0x00020000, \
+#define UNIPHIER_MIO_CLK_SD_MUX(_id, ch) \
+ { \
+ .id = (_id), \
+ .nr_muxs = 8, \
+ .reg = 0x30 + 0x200 * (ch), \
+ .masks = { \
+ 0x00031000, \
+ 0x00031000, \
+ 0x00031000, \
+ 0x00031000, \
+ 0x00001300, \
+ 0x00001300, \
+ 0x00001300, \
+ 0x00001300, \
+ }, \
+ .vals = { \
+ 0x00000000, \
+ 0x00010000, \
+ 0x00020000, \
+ 0x00030000, \
+ 0x00001000, \
+ 0x00001100, \
+ 0x00001200, \
+ 0x00001300, \
+ }, \
+ .rates = { \
+ 44444444, \
+ 33333333, \
+ 50000000, \
+ 66666666, \
+ 100000000, \
+ 40000000, \
+ 25000000, \
+ 22222222, \
+ }, \
}
static const struct uniphier_clk_gate_data uniphier_mio_clk_gate[] = {
- UNIPHIER_MIO_CLK_GATE_SD(0, 0),
- UNIPHIER_MIO_CLK_GATE_SD(1, 1),
- UNIPHIER_MIO_CLK_GATE_SD(2, 2), /* for PH1-Pro4 only */
- UNIPHIER_MIO_CLK_GATE_USB(0, 3),
- UNIPHIER_MIO_CLK_GATE_USB(1, 4),
- UNIPHIER_MIO_CLK_GATE_USB(2, 5),
- UNIPHIER_MIO_CLK_GATE_DMAC(6),
- UNIPHIER_MIO_CLK_GATE_USB(3, 7), /* for PH1-sLD3 only */
+ UNIPHIER_MIO_CLK_SD_GATE(0, 0),
+ UNIPHIER_MIO_CLK_SD_GATE(1, 1),
+ UNIPHIER_MIO_CLK_SD_GATE(2, 2), /* for PH1-Pro4 only */
+ UNIPHIER_MIO_CLK_DMAC(7),
+ UNIPHIER_MIO_CLK_USB2(8, 0),
+ UNIPHIER_MIO_CLK_USB2(9, 1),
+ UNIPHIER_MIO_CLK_USB2(10, 2),
+ UNIPHIER_MIO_CLK_USB2(11, 3), /* for PH1-sLD3 only */
+ UNIPHIER_MIO_CLK_USB2_PHY(12, 0),
+ UNIPHIER_MIO_CLK_USB2_PHY(13, 1),
+ UNIPHIER_MIO_CLK_USB2_PHY(14, 2),
+ UNIPHIER_MIO_CLK_USB2_PHY(15, 3), /* for PH1-sLD3 only */
+ UNIPHIER_CLK_END
};
-static const struct uniphier_clk_rate_data uniphier_mio_clk_rate[] = {
- UNIPHIER_MIO_CLK_RATE_SD(0, 0),
- UNIPHIER_MIO_CLK_RATE_SD(1, 1),
- UNIPHIER_MIO_CLK_RATE_SD(2, 2), /* for PH1-Pro4 only */
+static const struct uniphier_clk_mux_data uniphier_mio_clk_mux[] = {
+ UNIPHIER_MIO_CLK_SD_MUX(0, 0),
+ UNIPHIER_MIO_CLK_SD_MUX(1, 1),
+ UNIPHIER_MIO_CLK_SD_MUX(2, 2), /* for PH1-Pro4 only */
+ UNIPHIER_CLK_END
};
-const struct uniphier_clk_soc_data uniphier_mio_clk_data = {
+const struct uniphier_clk_data uniphier_mio_clk_data = {
.gate = uniphier_mio_clk_gate,
- .nr_gate = ARRAY_SIZE(uniphier_mio_clk_gate),
- .rate = uniphier_mio_clk_rate,
- .nr_rate = ARRAY_SIZE(uniphier_mio_clk_rate),
+ .mux = uniphier_mio_clk_mux,
};
@@ -10,36 +10,46 @@
#include <linux/kernel.h>
+#define UNIPHIER_CLK_MAX_NR_MUXS 8
+
struct uniphier_clk_gate_data {
- int index;
+ unsigned int id;
unsigned int reg;
- u32 mask;
- u32 data;
+ unsigned int bit;
};
-struct uniphier_clk_rate_data {
- int index;
+struct uniphier_clk_mux_data {
+ unsigned int id;
+ unsigned int nr_muxs;
unsigned int reg;
-#define UNIPHIER_CLK_RATE_IS_FIXED UINT_MAX
- u32 mask;
- u32 data;
- unsigned long rate;
+ unsigned int masks[UNIPHIER_CLK_MAX_NR_MUXS];
+ unsigned int vals[UNIPHIER_CLK_MAX_NR_MUXS];
+ unsigned long rates[UNIPHIER_CLK_MAX_NR_MUXS];
};
-struct uniphier_clk_soc_data {
+struct uniphier_clk_data {
const struct uniphier_clk_gate_data *gate;
- unsigned int nr_gate;
- const struct uniphier_clk_rate_data *rate;
- unsigned int nr_rate;
+ const struct uniphier_clk_mux_data *mux;
};
-#define UNIPHIER_CLK_FIXED_RATE(i, f) \
+#define UNIPHIER_CLK_ID_END (unsigned int)(-1)
+
+#define UNIPHIER_CLK_END \
+ { .id = UNIPHIER_CLK_ID_END }
+
+#define UNIPHIER_CLK_GATE(_id, _reg, _bit) \
+ { \
+ .id = (_id), \
+ .reg = (_reg), \
+ .bit = (_bit), \
+ }
+
+#define UNIPHIER_CLK_FIXED_RATE(_id, _rate) \
{ \
- .index = i, \
- .reg = UNIPHIER_CLK_RATE_IS_FIXED, \
- .rate = f, \
+ .id = (_id), \
+ .rates = {(_reg),}, \
}
-extern const struct uniphier_clk_soc_data uniphier_mio_clk_data;
+extern const struct uniphier_clk_data uniphier_mio_clk_data;
#endif /* __CLK_UNIPHIER_H__ */
The initial design of the UniPhier clk driver for U-Boot was not very nice. Here is a re-work to sync it with Linux's clk and reset drivers, maximizing the code reuse from Linux's clk data. Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com> --- drivers/clk/uniphier/Kconfig | 15 +-- drivers/clk/uniphier/Makefile | 5 +- drivers/clk/uniphier/clk-uniphier-core.c | 170 +++++++++++++--------------- drivers/clk/uniphier/clk-uniphier-mio.c | 183 +++++++++++-------------------- drivers/clk/uniphier/clk-uniphier.h | 46 +++++--- 5 files changed, 179 insertions(+), 240 deletions(-)