new file mode 100644
@@ -0,0 +1,13 @@
+HWMON i2c driver for IBM POWER CPU OCC (On Chip Controller)
+
+Required properties:
+ - compatible: must be "ibm,power8-occ-i2c"
+ - reg: physical address
+
+Example:
+i2c3: i2c-bus@100 {
+ occ@50 {
+ compatible = "ibm,occ-i2c";
+ reg = <0x50>;
+ };
+};
@@ -1226,6 +1226,8 @@ config SENSORS_NSA320
This driver can also be built as a module. If so, the module
will be called nsa320-hwmon.
+source drivers/hwmon/occ/Kconfig
+
config SENSORS_PCF8591
tristate "Philips PCF8591 ADC/DAC"
depends on I2C
@@ -165,6 +165,7 @@ obj-$(CONFIG_SENSORS_WM831X) += wm831x-hwmon.o
obj-$(CONFIG_SENSORS_WM8350) += wm8350-hwmon.o
obj-$(CONFIG_PMBUS) += pmbus/
+obj-$(CONFIG_OCC) += occ/
ccflags-$(CONFIG_HWMON_DEBUG_CHIP) := -DDEBUG
new file mode 100644
@@ -0,0 +1,15 @@
+#
+# On Chip Controller configuration
+#
+
+config OCC
+ tristate "On Chip Controller driver"
+ help
+ If you say yes here you get support to monitor Power CPU
+ sensors via the On Chip Controller (OCC).
+
+ Generally this is used by management controllers such as a BMC
+ on an OpenPower system.
+
+ This driver can also be built as a module. If so, the module
+ will be called occ.
new file mode 100644
@@ -0,0 +1 @@
+obj-$(CONFIG_OCC) += occ.o occ_i2c.o power8_occ.o
new file mode 100644
@@ -0,0 +1,128 @@
+/*
+ * occ.c - hwmon OCC driver
+ *
+ * This file contains common methods between different host systems and bus
+ * protocols.
+ *
+ * Copyright 2016 IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/err.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+#include <linux/hwmon.h>
+
+#include "occ.h"
+#include "power8_occ.h"
+
+static ssize_t show_occ_online(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct occ_driver *driver = dev_get_drvdata(dev);
+
+ return snprintf(buf, PAGE_SIZE - 1, "%u\n", driver->occ_online);
+}
+
+static ssize_t store_occ_online(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct occ_driver *driver = dev_get_drvdata(dev);
+ unsigned long val;
+ int rc;
+
+ rc = kstrtoul(buf, 10, &val);
+ if (rc)
+ return rc;
+
+ if (val == 1) {
+ if (driver->occ_online)
+ return count;
+
+ driver->hwmon = hwmon_device_register(dev);
+ if (IS_ERR(driver->hwmon))
+ return PTR_ERR(driver->hwmon);
+
+ rc = occ_init(driver);
+ if (rc) {
+ hwmon_device_unregister(driver->hwmon);
+ driver->hwmon = NULL;
+ return rc;
+ }
+ } else if (val == 0) {
+ if (!driver->occ_online)
+ return count;
+
+ occ_exit(driver);
+ hwmon_device_unregister(driver->hwmon);
+ driver->hwmon = NULL;
+ } else
+ return -EINVAL;
+
+ driver->occ_online = val;
+ return count;
+}
+
+static DEVICE_ATTR(online, S_IWUSR | S_IRUGO, show_occ_online,
+ store_occ_online);
+
+/*
+ * occ_probe - hardware agnostic initialization method
+ * @dev: device handle for transfer protocol
+ * @bus_ops: transfer methods to communicate with the OCC
+ * @bus: private handle for transfer protocol
+ *
+ * this initializes common aspects of the hwmon driver across bus protocols and
+ * host systems.
+ *
+ * returns negative errno on failure or 0 on success
+ */
+int occ_probe(struct device *dev, struct occ_bus_ops bus_ops, void *bus)
+{
+ struct occ_driver *driver = devm_kzalloc(dev,
+ sizeof(struct occ_driver),
+ GFP_KERNEL);
+
+ if (!driver)
+ return -ENOMEM;
+
+ driver->bus = bus;
+ driver->bus_ops = bus_ops;
+
+ dev_set_drvdata(dev, driver);
+
+ return device_create_file(dev, &dev_attr_online);
+}
+
+/*
+ * occ_remove - hardware agnostic exit method
+ * @dev: device handle for transfer protocol
+ *
+ * returns negative errno on failure or 0 on success
+ */
+int occ_remove(struct device *dev)
+{
+ struct occ_driver *driver = dev_get_drvdata(dev);
+
+ device_remove_file(dev, &dev_attr_online);
+
+ if (driver->hwmon) {
+ occ_exit(driver);
+ hwmon_device_unregister(driver->hwmon);
+ }
+
+ return 0;
+}
new file mode 100644
@@ -0,0 +1,47 @@
+/*
+ * power_occ.h - hwmon OCC driver
+ *
+ * This file contains data structures and function prototypes for common access
+ * between different bus protocols and host systems.
+ *
+ * Copyright 2016 IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __OCC_H__
+#define __OCC_H__
+
+struct device;
+
+/*
+ * occ_bus_ops - represent the low-level transfer methods to communicate with
+ * the OCC.
+ */
+struct occ_bus_ops {
+ int (*getscom)(void *bus, u32 address, u8 *data, size_t offset);
+ int (*putscom)(void *bus, u32 address, u32 data0, u32 data1);
+};
+
+/*
+ * occ_driver - structure to store all global driver data
+ */
+struct occ_driver {
+ void *bus;
+ struct occ_bus_ops bus_ops;
+ struct device *hwmon;
+ bool occ_online;
+};
+
+int occ_probe(struct device *dev, struct occ_bus_ops bus_ops, void *bus);
+int occ_remove(struct device *dev);
+
+#endif /* __OCC_H__ */
new file mode 100644
@@ -0,0 +1,150 @@
+/*
+ * occ_i2c.c - hwmon OCC driver
+ *
+ * This file contains the i2c layer for accessing the OCC over i2c bus.
+ *
+ * Copyright 2016 IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/i2c.h>
+#include <linux/err.h>
+#include <linux/of.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+
+#include "occ.h"
+
+#define OCC_I2C_NAME "occ-i2c"
+
+#define I2C_READ_ERROR 1
+#define I2C_WRITE_ERROR 2
+
+/*
+ * occ_getscom - helper function for scom read over i2c to OCC
+ * @bus: handle to slave device
+ * @address: address
+ * @data: where to store data read from slave; buffer size must be greater than
+ * or equal to offset + 8 bytes.
+ * @offset: offset into data pointer
+ *
+ * Returns 0 on success or -1 on read error, -2 on write error
+ */
+int occ_getscom(void *bus, u32 address, u8 *data, size_t offset)
+{
+ ssize_t rc;
+ u64 buf;
+ struct i2c_client *client = bus;
+
+ /* P8 i2c slave requires address to be shifted by 1 */
+ address = address << 1;
+
+ rc = i2c_master_send(client, (const char *)&address, sizeof(u32));
+ if (rc != sizeof(u32))
+ return -I2C_WRITE_ERROR;
+
+ rc = i2c_master_recv(client, (char *)&buf, sizeof(u64));
+ if (rc != sizeof(u64))
+ return -I2C_READ_ERROR;
+
+ *((u64 *)data) = le64_to_cpu(buf);
+
+ return 0;
+}
+
+/*
+ * occ_putscom - helper function for scom write over i2c to OCC
+ * @bus: handle to slave device
+ * @address: address
+ * @data0: first data byte to write
+ * @data1: second data byte to write
+ *
+ * Returns 0 on success or -2 on error
+ */
+int occ_putscom(void *bus, u32 address, u32 data0, u32 data1)
+{
+ u32 buf[3];
+ ssize_t rc;
+ struct i2c_client *client = bus;
+
+ /* P8 i2c slave requires address to be shifted by 1 */
+ address = address << 1;
+
+ buf[0] = address;
+ buf[1] = data1;
+ buf[2] = data0;
+
+ rc = i2c_master_send(client, (const char *)buf, sizeof(u32) * 3);
+ if (rc != sizeof(u32) * 3)
+ return -I2C_WRITE_ERROR;
+
+ return 0;
+}
+
+static int occ_i2c_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ struct occ_bus_ops bus_ops;
+
+ bus_ops.getscom = occ_getscom;
+ bus_ops.putscom = occ_putscom;
+
+ return occ_probe(&client->dev, bus_ops, client);
+}
+
+static int occ_i2c_remove(struct i2c_client *client)
+{
+ return occ_remove(&client->dev);
+}
+
+/* used by old-style board info. */
+static const struct i2c_device_id occ_ids[] = {
+ { OCC_I2C_NAME, 0 },
+ {}
+};
+MODULE_DEVICE_TABLE(i2c, occ_ids);
+
+/* used by device table */
+static const struct of_device_id occ_of_match[] = {
+ { .compatible = "ibm,occ-i2c" },
+ {}
+};
+MODULE_DEVICE_TABLE(of, occ_of_match);
+
+/*
+ * i2c-core uses i2c-detect() to detect device in below address list.
+ * If exists, address will be assigned to client.
+ * It is also possible to read address from device table.
+ */
+static const unsigned short normal_i2c[] = {0x50, 0x51, I2C_CLIENT_END };
+
+static struct i2c_driver occ_i2c_driver = {
+ .class = I2C_CLASS_HWMON,
+ .driver = {
+ .name = OCC_I2C_NAME,
+ .pm = NULL,
+ .of_match_table = occ_of_match,
+ },
+ .probe = occ_i2c_probe,
+ .remove = occ_i2c_remove,
+ .id_table = occ_ids,
+ .address_list = normal_i2c,
+};
+
+module_i2c_driver(occ_i2c_driver);
+
+MODULE_AUTHOR("Eddie James <eajames@us.ibm.com>");
+MODULE_DESCRIPTION("BMC OCC hwmon driver");
+MODULE_LICENSE("GPL");
new file mode 100644
@@ -0,0 +1,58 @@
+/*
+ * power8_occ.c - Power8 OCC hwmon driver
+ *
+ * This file contains the Power8-specific methods and data structures for
+ * the OCC hwmon driver.
+ *
+ * Copyright 2016 IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/slab.h>
+#include <linux/jiffies.h>
+#include <linux/hwmon.h>
+#include <linux/hwmon-sysfs.h>
+#include <linux/err.h>
+#include <linux/mutex.h>
+#include <linux/delay.h>
+#include <linux/kernel.h>
+#include <linux/device.h>
+
+#include "occ.h"
+
+struct power8_driver {
+ struct occ_driver *driver;
+ struct device *dev;
+};
+
+int occ_init(struct occ_driver *driver)
+{
+ struct device *dev = driver->hwmon;
+ struct power8_driver *powr = devm_kzalloc(dev,
+ sizeof(struct power8_driver),
+ GFP_KERNEL);
+ if (!powr)
+ return -ENOMEM;
+
+ powr->driver = driver;
+ powr->dev = dev;
+
+ dev_set_drvdata(dev, powr);
+
+ return 0;
+}
+
+void occ_exit(struct occ_driver *driver)
+{
+}
new file mode 100644
@@ -0,0 +1,25 @@
+/*
+ * power8_occ.h - Power8 OCC hwmon driver
+ *
+ * This file contains Power8 specific function prototypes
+ *
+ * Copyright 2016 IBM Corp.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __POWER8_OCC_H__
+#define __POWER8_OCC_H__
+
+int occ_init(struct occ_driver *driver);
+void occ_exit(struct occ_driver *driver);
+
+#endif /* __POWER8_OCC_H__ */