Patchwork [NEXT,2/2] netxen: mask correctable error

login
register
mail settings
Submitter amit salecha
Date Oct. 18, 2010, 12:03 p.m.
Message ID <1287403422-10431-2-git-send-email-amit.salecha@qlogic.com>
Download mbox | patch
Permalink /patch/68172/
State Accepted
Delegated to: David Miller
Headers show

Comments

amit salecha - Oct. 18, 2010, 12:03 p.m.
HW workaround:
Disable logging of correctable error for some NX3031 based adapter.

Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>
---
 drivers/net/netxen/netxen_nic_hw.c   |    4 ++--
 drivers/net/netxen/netxen_nic_main.c |   26 ++++++++++++++++++++++++++
 2 files changed, 28 insertions(+), 2 deletions(-)
David Miller - Oct. 18, 2010, 2:23 p.m.
From: Amit Kumar Salecha <amit.salecha@qlogic.com>
Date: Mon, 18 Oct 2010 05:03:42 -0700

> HW workaround:
> Disable logging of correctable error for some NX3031 based adapter.
> 
> Signed-off-by: Amit Kumar Salecha <amit.salecha@qlogic.com>

Applied.
--
To unsubscribe from this list: send the line "unsubscribe netdev" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Patch

diff --git a/drivers/net/netxen/netxen_nic_hw.c b/drivers/net/netxen/netxen_nic_hw.c
index 10e2f13..4b4ac71 100644
--- a/drivers/net/netxen/netxen_nic_hw.c
+++ b/drivers/net/netxen/netxen_nic_hw.c
@@ -1822,14 +1822,14 @@  int netxen_nic_get_board_info(struct netxen_adapter *adapter)
 	if (netxen_rom_fast_read(adapter, offset, &board_type))
 		return -EIO;
 
-	adapter->ahw.board_type = board_type;
-
 	if (board_type == NETXEN_BRDTYPE_P3_4_GB_MM) {
 		u32 gpio = NXRD32(adapter, NETXEN_ROMUSB_GLB_PAD_GPIO_I);
 		if ((gpio & 0x8000) == 0)
 			board_type = NETXEN_BRDTYPE_P3_10G_TP;
 	}
 
+	adapter->ahw.board_type = board_type;
+
 	switch (board_type) {
 	case NETXEN_BRDTYPE_P2_SB35_4G:
 		adapter->ahw.port_type = NETXEN_NIC_GBE;
diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c
index 83ee554..6f11169 100644
--- a/drivers/net/netxen/netxen_nic_main.c
+++ b/drivers/net/netxen/netxen_nic_main.c
@@ -1249,6 +1249,28 @@  netxen_setup_netdev(struct netxen_adapter *adapter,
 	return 0;
 }
 
+#ifdef CONFIG_PCIEAER
+static void netxen_mask_aer_correctable(struct netxen_adapter *adapter)
+{
+	struct pci_dev *pdev = adapter->pdev;
+	struct pci_dev *root = pdev->bus->self;
+	u32 aer_pos;
+
+	if (adapter->ahw.board_type != NETXEN_BRDTYPE_P3_4_GB_MM &&
+		adapter->ahw.board_type != NETXEN_BRDTYPE_P3_10G_TP)
+		return;
+
+	if (root->pcie_type != PCI_EXP_TYPE_ROOT_PORT)
+		return;
+
+	aer_pos = pci_find_ext_capability(root, PCI_EXT_CAP_ID_ERR);
+	if (!aer_pos)
+		return;
+
+	pci_write_config_dword(root, aer_pos + PCI_ERR_COR_MASK, 0xffff);
+}
+#endif
+
 static int __devinit
 netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 {
@@ -1317,6 +1339,10 @@  netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
 		goto err_out_iounmap;
 	}
 
+#ifdef CONFIG_PCIEAER
+	netxen_mask_aer_correctable(adapter);
+#endif
+
 	/* Mezz cards have PCI function 0,2,3 enabled */
 	switch (adapter->ahw.board_type) {
 	case NETXEN_BRDTYPE_P2_SB31_10G_IMEZ: