Patchwork [v4,12/15] x3130: pcie upstream port

login
register
mail settings
Submitter Isaku Yamahata
Date Oct. 18, 2010, 3:17 a.m.
Message ID <ecd72ee2e22c11a6a2df89363744b1bc5001f8d2.1287371107.git.yamahata@valinux.co.jp>
Download mbox | patch
Permalink /patch/68115/
State New
Headers show

Comments

Isaku Yamahata - Oct. 18, 2010, 3:17 a.m.
Implement TI x3130 pcie upstream port switch.

Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp>
---
Chnages v3 -> v4:
- rename pcie_upstream -> x3130_upstream.
- compilation adjustment.

Changes v2 -> v3:
- compilation adjustment.
---
 Makefile.objs         |    2 +-
 hw/xio3130_upstream.c |  188 +++++++++++++++++++++++++++++++++++++++++++++++++
 hw/xio3130_upstream.h |   10 +++
 3 files changed, 199 insertions(+), 1 deletions(-)
 create mode 100644 hw/xio3130_upstream.c
 create mode 100644 hw/xio3130_upstream.h
Michael S. Tsirkin - Oct. 18, 2010, 4:59 a.m.
On Mon, Oct 18, 2010 at 12:17:53PM +0900, Isaku Yamahata wrote:
> +static void xio3130_upstream_flr(PCIDevice *d)
> +{
> +    /* TODO: not enabled until qdev reset clean up
> +       waiting for Anthony's qdev cealn up */

typo

> +#if 0
> +    /* So far, sticky bit registers or register which must be preserved
> +       over FLR aren't emulated. So just reset this device. */
> +    pci_device_reset(d);
> +#endif
> +}

Patch

diff --git a/Makefile.objs b/Makefile.objs
index cf7d2e9..d61e88a 100644
--- a/Makefile.objs
+++ b/Makefile.objs
@@ -140,7 +140,7 @@  hw-obj-y =
 hw-obj-y += vl.o loader.o
 hw-obj-y += virtio.o virtio-console.o
 hw-obj-y += fw_cfg.o pci.o pci_host.o pcie_host.o pci_bridge.o
-hw-obj-y += ioh3420.o
+hw-obj-y += ioh3420.o xio3130_upstream.o
 hw-obj-y += watchdog.o
 hw-obj-$(CONFIG_ISA_MMIO) += isa_mmio.o
 hw-obj-$(CONFIG_ECC) += ecc.o
diff --git a/hw/xio3130_upstream.c b/hw/xio3130_upstream.c
new file mode 100644
index 0000000..5c5deb2
--- /dev/null
+++ b/hw/xio3130_upstream.c
@@ -0,0 +1,188 @@ 
+/*
+ * xio3130_upstream.c
+ * TI X3130 pci express upstream port switch
+ *
+ * Copyright (c) 2010 Isaku Yamahata <yamahata at valinux co jp>
+ *                    VA Linux Systems Japan K.K.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, see <http://www.gnu.org/licenses/>.
+ */
+
+#include "pci_ids.h"
+#include "msi.h"
+#include "pcie.h"
+#include "xio3130_upstream.h"
+
+#define PCI_DEVICE_ID_TI_XIO3130U       0x8232  /* upstream port */
+#define XIO3130_REVISION                0x2
+#define XIO3130_MSI_OFFSET              0x70
+#define XIO3130_MSI_SUPPORTED_FLAGS     PCI_MSI_FLAGS_64BIT
+#define XIO3130_MSI_NR_VECTOR           1
+#define XIO3130_SSVID_OFFSET            0x80
+#define XIO3130_SSVID_SVID              0
+#define XIO3130_SSVID_SSID              0
+#define XIO3130_EXP_OFFSET              0x90
+#define XIO3130_AER_OFFSET              0x100
+
+static void xio3130_upstream_write_config(PCIDevice *d, uint32_t address,
+                                          uint32_t val, int len)
+{
+    uint32_t uncorsta =
+        pci_get_long(d->config + d->exp.aer_cap + PCI_ERR_UNCOR_STATUS);
+
+    pci_bridge_write_config(d, address, val, len);
+    pcie_cap_flr_write_config(d, address, val, len);
+    msi_write_config(d, address, val, len);
+    pcie_aer_write_config(d, address, val, len, uncorsta);
+    pci_clear_written_write_config(d, address, val, len);
+}
+
+static void xio3130_upstream_reset(DeviceState *qdev)
+{
+    PCIDevice *d = DO_UPCAST(PCIDevice, qdev, qdev);
+    msi_reset(d);
+    pci_bridge_reset(qdev);
+    pcie_cap_deverr_reset(d);
+}
+
+static void xio3130_upstream_flr(PCIDevice *d)
+{
+    /* TODO: not enabled until qdev reset clean up
+       waiting for Anthony's qdev cealn up */
+#if 0
+    /* So far, sticky bit registers or register which must be preserved
+       over FLR aren't emulated. So just reset this device. */
+    pci_device_reset(d);
+#endif
+}
+
+static int xio3130_upstream_initfn(PCIDevice *d)
+{
+    PCIBridge* br = DO_UPCAST(PCIBridge, dev, d);
+    PCIEPort *p = DO_UPCAST(PCIEPort, br, br);
+    int rc;
+
+    rc = pci_bridge_initfn(d);
+    if (rc < 0) {
+        return rc;
+    }
+
+    pcie_port_init_reg(d);
+    pci_config_set_vendor_id(d->config, PCI_VENDOR_ID_TI);
+    pci_config_set_device_id(d->config, PCI_DEVICE_ID_TI_XIO3130U);
+    d->config[PCI_REVISION_ID] = XIO3130_REVISION;
+
+    rc = msi_init(d, XIO3130_MSI_OFFSET, XIO3130_MSI_NR_VECTOR,
+                  XIO3130_MSI_SUPPORTED_FLAGS & PCI_MSI_FLAGS_64BIT,
+                  XIO3130_MSI_SUPPORTED_FLAGS & PCI_MSI_FLAGS_MASKBIT);
+    if (rc < 0) {
+        return rc;
+    }
+    rc = pci_bridge_ssvid_init(d, XIO3130_SSVID_OFFSET,
+                               XIO3130_SSVID_SVID, XIO3130_SSVID_SSID);
+    if (rc < 0) {
+        return rc;
+    }
+    rc = pcie_cap_init(d, XIO3130_EXP_OFFSET, PCI_EXP_TYPE_UPSTREAM,
+                       p->port);
+    if (rc < 0) {
+        return rc;
+    }
+    pcie_cap_flr_init(d, &xio3130_upstream_flr);
+    pcie_cap_deverr_init(d);
+    pcie_aer_init(d, XIO3130_AER_OFFSET);
+
+    return 0;
+}
+
+static int xio3130_upstream_exitfn(PCIDevice *d)
+{
+    pcie_aer_exit(d);
+    msi_uninit(d);
+    pcie_cap_exit(d);
+    return pci_bridge_exitfn(d);
+}
+
+PCIEPort *xio3130_upstream_init(PCIBus *bus, int devfn, bool multifunction,
+                             const char *bus_name, pci_map_irq_fn map_irq,
+                             uint8_t port)
+{
+    PCIDevice *d;
+    PCIBridge *br;
+    DeviceState *qdev;
+
+    d = pci_create_multifunction(bus, devfn, multifunction, "x3130-upstream");
+    if (!d) {
+        return NULL;
+    }
+    br = DO_UPCAST(PCIBridge, dev, d);
+
+    qdev = &br->dev.qdev;
+    pci_bridge_map_irq(br, bus_name, map_irq);
+    qdev_prop_set_uint8(qdev, "port", port);
+    qdev_init_nofail(qdev);
+
+    return DO_UPCAST(PCIEPort, br, br);
+}
+
+static const VMStateDescription vmstate_xio3130_upstream = {
+    .name = "xio3130-express-upstream-port",
+    .version_id = 1,
+    .minimum_version_id = 1,
+    .minimum_version_id_old = 1,
+    .fields = (VMStateField[]) {
+        VMSTATE_PCIE_DEVICE(br.dev, PCIEPort),
+        VMSTATE_STRUCT(br.dev.exp.aer_log, PCIEPort, 0, vmstate_pcie_aer_log,
+                       PCIEAERLog),
+        VMSTATE_END_OF_LIST()
+    }
+};
+
+static PCIDeviceInfo xio3130_upstream_info = {
+    .qdev.name = "x3130-upstream",
+    .qdev.desc = "TI X3130 Upstream Port of PCI Express Switch",
+    .qdev.size = sizeof(PCIEPort),
+    .qdev.reset = xio3130_upstream_reset,
+    .qdev.vmsd = &vmstate_xio3130_upstream,
+
+    .is_express = 1,
+    .is_bridge = 1,
+    .config_write = xio3130_upstream_write_config,
+    .init = xio3130_upstream_initfn,
+    .exit = xio3130_upstream_exitfn,
+
+    .qdev.props = (Property[]) {
+        DEFINE_PROP_UINT8("port", PCIEPort, port, 0),
+        DEFINE_PROP_UINT16("aer_log_max", PCIEPort, br.dev.exp.aer_log.log_max,
+                           PCIE_AER_LOG_MAX_DEFAULT),
+        DEFINE_PROP_END_OF_LIST(),
+    }
+};
+
+static void xio3130_upstream_register(void)
+{
+    pci_qdev_register(&xio3130_upstream_info);
+}
+
+device_init(xio3130_upstream_register);
+
+
+/*
+ * Local variables:
+ *  c-indent-level: 4
+ *  c-basic-offset: 4
+ *  tab-width: 8
+ *  indent-tab-mode: nil
+ * End:
+ */
diff --git a/hw/xio3130_upstream.h b/hw/xio3130_upstream.h
new file mode 100644
index 0000000..e996997
--- /dev/null
+++ b/hw/xio3130_upstream.h
@@ -0,0 +1,10 @@ 
+#ifndef QEMU_XIO3130_UPSTREAM_H
+#define QEMU_XIO3130_UPSTREAM_H
+
+#include "pcie_port.h"
+
+PCIEPort *xio3130_upstream_init(PCIBus *bus, int devfn, bool multifunction,
+                                const char *bus_name, pci_map_irq_fn map_irq,
+                                uint8_t port);
+
+#endif /* QEMU_XIO3130_H */