Message ID | b63a0ad452a487beb1d0c07addb9208cc3b3eeef.1475774981.git.paweljarosz3691@gmail.com |
---|---|
State | New |
Headers | show |
Hi Paweł , On 2016/10/7 1:38, Paweł Jarosz wrote: > MK808 is a tv stick which has rockchip rk3066 CPU inside, two usb ports > - host and otg, micro sd card slot and onboard wifi RK901. > > Signed-off-by: Paweł Jarosz <paweljarosz3691@gmail.com> > --- > > Changes in v2: > - included Heiko sugestion. > > Documentation/devicetree/bindings/arm/rockchip.txt | 4 + > arch/arm/boot/dts/Makefile | 1 + > arch/arm/boot/dts/rk3066a-mk808.dts | 184 +++++++++++++++++++++ > 3 files changed, 189 insertions(+) > create mode 100644 arch/arm/boot/dts/rk3066a-mk808.dts > > diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt b/Documentation/devicetree/bindings/arm/rockchip.txt > index 55f388f..c09595b 100644 > --- a/Documentation/devicetree/bindings/arm/rockchip.txt > +++ b/Documentation/devicetree/bindings/arm/rockchip.txt > @@ -17,6 +17,10 @@ Rockchip platforms device tree bindings > Required root node properties: > - compatible = "chipspark,rayeager-px2", "rockchip,rk3066a"; > > +- Rikomagic MK808 v1 board: > + Required root node properties: > + - compatible = "rikomagic,mk808", "rockchip,rk3066a"; > + > - Radxa Rock board: > Required root node properties: > - compatible = "radxa,rock", "rockchip,rk3188"; > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > index befcd26..f19cc1d 100644 > --- a/arch/arm/boot/dts/Makefile > +++ b/arch/arm/boot/dts/Makefile > @@ -639,6 +639,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \ > rk3036-kylin.dtb \ > rk3066a-bqcurie2.dtb \ > rk3066a-marsboard.dtb \ > + rk3066a-mk808.dtb \ > rk3066a-rayeager.dtb \ > rk3188-radxarock.dtb \ > rk3228-evb.dtb \ > diff --git a/arch/arm/boot/dts/rk3066a-mk808.dts b/arch/arm/boot/dts/rk3066a-mk808.dts > new file mode 100644 > index 0000000..2878562 > --- /dev/null > +++ b/arch/arm/boot/dts/rk3066a-mk808.dts > @@ -0,0 +1,184 @@ > +/* > + * Copyright (c) 2016 Paweł Jarosz <paweljarosz3691@gmail.com> > + * > + * This file is dual-licensed: you can use it either under the terms > + * of the GPL or the X11 license, at your option. Note that this dual > + * licensing only applies to this file, and not this project as a > + * whole. > + * > + * a) This file is free software; you can redistribute it and/or > + * modify it under the terms of the GNU General Public License as > + * published by the Free Software Foundation; either version 2 of the > + * License, or (at your option) any later version. > + * > + * This file is distributed in the hope that it will be useful, > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > + * GNU General Public License for more details. > + * > + * Or, alternatively, > + * > + * b) Permission is hereby granted, free of charge, to any person > + * obtaining a copy of this software and associated documentation > + * files (the "Software"), to deal in the Software without > + * restriction, including without limitation the rights to use, > + * copy, modify, merge, publish, distribute, sublicense, and/or > + * sell copies of the Software, and to permit persons to whom the > + * Software is furnished to do so, subject to the following > + * conditions: > + * > + * The above copyright notice and this permission notice shall be > + * included in all copies or substantial portions of the Software. > + * > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, > + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES > + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND > + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT > + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, > + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING > + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR > + * OTHER DEALINGS IN THE SOFTWARE. > + */ > + > +/dts-v1/; > +#include "rk3066a.dtsi" > + > +/ { > + model = "Rikomagic MK808"; > + compatible = "rikomagic,mk808", "rockchip,rk3066a"; > + > + chosen { > + stdout-path = "serial2:115200n8"; > + }; > + > + memory@60000000 { > + device_type = "memory"; > + reg = <0x60000000 0x40000000>; > + }; > + > + gpio-leds { > + compatible = "gpio-leds"; > + > + blue { > + label = "mk808:blue:power"; > + gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>; > + default-state = "off"; > + linux,default-trigger = "default-on"; > + }; > + }; > + > + mmc_pwrseq: mmc-pwrseq { > + compatible = "mmc-pwrseq-simple"; > + pinctrl-names = "default"; > + pinctrl-0 = <&sdmmc_pwr>; sd slot does not contain a reset pin. So the power pin should be enough. just add sdmmc_pwr to mmc0's pinctrl-0 and let mmc driver control it should be enough. Typically pwrseq is for emmc and sdio. We don't need a pwerseq to control power for sd slot.. But it seems sdmmc_pwr is a GPIO, but not functional port. So I am interesting that why MK808 board doesn't use the mmc controller's default power pin but chosing another gpio, so finally we have to add thses code for your DT. > + reset-gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>; > + }; > + > + sdio_pwrseq: sdio-pwrseq { > + compatible = "mmc-pwrseq-simple"; > + pinctrl-names = "default"; > + pinctrl-0 = <&wifi_pwr>; > + reset-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>; > + }; > + > + vcc_io: vcc-io { > + compatible = "regulator-fixed"; > + regulator-name = "vcc_io"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; Are you sure it should be fixed to 5V? I ask this since I see the mmc use this as vmmc which should be 3V~3V3 in principle. > + regulator-always-on; I'm not sure whether you need this. The regulator would maintain the user_count there. So from this patch, I think it should be turned off since we possible don't enable usb and mmc? Moreover, the always-on power supply is depreciated by vmmc since it cause some problem to a certain degree. > + }; > + > + vcc_host: usb-host-regulator { > + compatible = "regulator-fixed"; > + gpio = <&gpio0 6 GPIO_ACTIVE_HIGH>; > + pinctrl-0 = <&host_drv>; > + pinctrl-names = "default"; > + regulator-always-on; > + regulator-name = "host-pwr"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + startup-delay-us = <100000>; > + vin-supply = <&vcc_io>; > + }; > + > + vcc_otg: usb-otg-regulator { > + compatible = "regulator-fixed"; > + gpio = <&gpio0 5 GPIO_ACTIVE_HIGH>; > + pinctrl-0 = <&otg_drv>; > + pinctrl-names = "default"; > + regulator-always-on; > + regulator-name = "vcc_otg"; > + regulator-min-microvolt = <5000000>; > + regulator-max-microvolt = <5000000>; > + startup-delay-us = <100000>; > + vin-supply = <&vcc_io>; > + }; > +}; Same concern for these above. > + > +&mmc0 { > + bus-width = <4>; > + cap-mmc-highspeed; > + cap-sd-highspeed; > + mmc-pwrseq = <&mmc_pwrseq>; Removed this could make SD works? Also do you need disable-wp for sd slot? > + num-slots = <1>; > + status = "okay"; > + vmmc-supply = <&vcc_io>; > +}; > + > +&mmc1 { > + bus-width = <4>; > + disable-wp; > + mmc-pwrseq = <&sdio_pwrseq>; > + non-removable; > + num-slots = <1>; > + status = "okay"; > + vmmc-supply = <&vcc_io>; > +}; > + > +&pinctrl { > + usb-host { > + host_drv: host-drv { > + rockchip,pins = <RK_GPIO0 6 RK_FUNC_GPIO &pcfg_pull_default>; > + }; > + }; > + > + usb-otg { > + otg_drv: otg-drv { > + rockchip,pins = <RK_GPIO0 5 RK_FUNC_GPIO &pcfg_pull_default>; > + }; > + }; > + > + sdmmc { > + sdmmc_pwr: sdmmc-pwr { > + rockchip,pins = <RK_GPIO3 7 RK_FUNC_GPIO &pcfg_pull_default>; > + }; > + }; > + > + sdio { > + wifi_pwr: wifi-pwr { > + rockchip,pins = <RK_GPIO3 24 RK_FUNC_GPIO &pcfg_pull_none>; > + }; > + }; > +}; > + > +&uart2 { > + status = "okay"; > +}; > + > +&usb_host { > + status = "okay"; > +}; > + > +&usb_otg { > + status = "okay"; > +}; > + > +&usbphy { > + status = "okay"; > +}; > + > +&wdt { > + status = "okay"; > +}; > + >
Hi Shawn, >> +&mmc0 { >> + bus-width = <4>; >> + cap-mmc-highspeed; >> + cap-sd-highspeed; >> + mmc-pwrseq = <&mmc_pwrseq>; > > Removed this could make SD works? Yes but disabling bus-width causes sd performance decrease(defaults to 1?) so i'll leave this one. Other sugestions will be included in v3. Thanks Paweł.
在 2016/10/7 16:40, Paweł Jarosz 写道: > Hi Shawn, > > >>> +&mmc0 { >>> + bus-width = <4>; >>> + cap-mmc-highspeed; >>> + cap-sd-highspeed; >>> + mmc-pwrseq = <&mmc_pwrseq>; >> >> Removed this could make SD works? > > Yes but disabling bus-width causes sd performance decrease(defaults to > 1?) so i'll leave this one. I just pointed to the mmc-pwrseq, not for others properties :) > > Other sugestions will be included in v3. > > Thanks > > Paweł. > > > > > > _______________________________________________ > Linux-rockchip mailing list > Linux-rockchip@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-rockchip
Am Freitag, 7. Oktober 2016, 10:29:48 CEST schrieb Shawn Lin: > Hi Paweł , > > On 2016/10/7 1:38, Paweł Jarosz wrote: > > MK808 is a tv stick which has rockchip rk3066 CPU inside, two usb ports > > - host and otg, micro sd card slot and onboard wifi RK901. > > > > Signed-off-by: Paweł Jarosz <paweljarosz3691@gmail.com> > > --- > > > > Changes in v2: > > - included Heiko sugestion. > > > > Documentation/devicetree/bindings/arm/rockchip.txt | 4 + > > arch/arm/boot/dts/Makefile | 1 + > > arch/arm/boot/dts/rk3066a-mk808.dts | 184 > > +++++++++++++++++++++ 3 files changed, 189 insertions(+) > > create mode 100644 arch/arm/boot/dts/rk3066a-mk808.dts > > > > diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt > > b/Documentation/devicetree/bindings/arm/rockchip.txt index > > 55f388f..c09595b 100644 > > --- a/Documentation/devicetree/bindings/arm/rockchip.txt > > +++ b/Documentation/devicetree/bindings/arm/rockchip.txt > > @@ -17,6 +17,10 @@ Rockchip platforms device tree bindings > > > > Required root node properties: > > - compatible = "chipspark,rayeager-px2", "rockchip,rk3066a"; > > > > +- Rikomagic MK808 v1 board: > > + Required root node properties: > > + - compatible = "rikomagic,mk808", "rockchip,rk3066a"; > > + > > > > - Radxa Rock board: > > Required root node properties: > > - compatible = "radxa,rock", "rockchip,rk3188"; > > > > diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > > index befcd26..f19cc1d 100644 > > --- a/arch/arm/boot/dts/Makefile > > +++ b/arch/arm/boot/dts/Makefile > > @@ -639,6 +639,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \ > > > > rk3036-kylin.dtb \ > > rk3066a-bqcurie2.dtb \ > > rk3066a-marsboard.dtb \ > > > > + rk3066a-mk808.dtb \ > > > > rk3066a-rayeager.dtb \ > > rk3188-radxarock.dtb \ > > rk3228-evb.dtb \ > > > > diff --git a/arch/arm/boot/dts/rk3066a-mk808.dts > > b/arch/arm/boot/dts/rk3066a-mk808.dts new file mode 100644 > > index 0000000..2878562 > > --- /dev/null > > +++ b/arch/arm/boot/dts/rk3066a-mk808.dts > > @@ -0,0 +1,184 @@ > > +/* > > + * Copyright (c) 2016 Paweł Jarosz <paweljarosz3691@gmail.com> > > + * > > + * This file is dual-licensed: you can use it either under the terms > > + * of the GPL or the X11 license, at your option. Note that this dual > > + * licensing only applies to this file, and not this project as a > > + * whole. > > + * > > + * a) This file is free software; you can redistribute it and/or > > + * modify it under the terms of the GNU General Public License as > > + * published by the Free Software Foundation; either version 2 of the > > + * License, or (at your option) any later version. > > + * > > + * This file is distributed in the hope that it will be useful, > > + * but WITHOUT ANY WARRANTY; without even the implied warranty of > > + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > > + * GNU General Public License for more details. > > + * > > + * Or, alternatively, > > + * > > + * b) Permission is hereby granted, free of charge, to any person > > + * obtaining a copy of this software and associated documentation > > + * files (the "Software"), to deal in the Software without > > + * restriction, including without limitation the rights to use, > > + * copy, modify, merge, publish, distribute, sublicense, and/or > > + * sell copies of the Software, and to permit persons to whom the > > + * Software is furnished to do so, subject to the following > > + * conditions: > > + * > > + * The above copyright notice and this permission notice shall be > > + * included in all copies or substantial portions of the Software. > > + * > > + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, > > + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES > > + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND > > + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT > > + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, > > + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING > > + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR > > + * OTHER DEALINGS IN THE SOFTWARE. > > + */ > > + > > +/dts-v1/; > > +#include "rk3066a.dtsi" > > + > > +/ { > > + model = "Rikomagic MK808"; > > + compatible = "rikomagic,mk808", "rockchip,rk3066a"; > > + > > + chosen { > > + stdout-path = "serial2:115200n8"; > > + }; > > + > > + memory@60000000 { > > + device_type = "memory"; > > + reg = <0x60000000 0x40000000>; > > + }; > > + > > + gpio-leds { > > + compatible = "gpio-leds"; > > + > > + blue { > > + label = "mk808:blue:power"; > > + gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>; > > + default-state = "off"; > > + linux,default-trigger = "default-on"; > > + }; > > + }; > > + > > + mmc_pwrseq: mmc-pwrseq { > > + compatible = "mmc-pwrseq-simple"; > > + pinctrl-names = "default"; > > + pinctrl-0 = <&sdmmc_pwr>; > > sd slot does not contain a reset pin. So the power pin should be > enough. just add sdmmc_pwr to mmc0's pinctrl-0 and let mmc driver > control it should be enough. Typically pwrseq is for emmc and sdio. > We don't need a pwerseq to control power for sd slot.. > > But it seems sdmmc_pwr is a GPIO, but not functional port. > So I am interesting that why MK808 board doesn't use the mmc > controller's default power pin but chosing another gpio, so finally > we have to add thses code for your DT. Actually, we always model the sd-mmc pwr-pin as gpio-based regulator (see sdmmc-regulator for example in the rk3066a-rayeager.dts), and specifiy this regulator as vmmc. That way the mmc core really can control the power. Heiko
在 2016/10/7 18:01, Heiko Stuebner 写道: > Am Freitag, 7. Oktober 2016, 10:29:48 CEST schrieb Shawn Lin: >> Hi Paweł , >> >> On 2016/10/7 1:38, Paweł Jarosz wrote: >>> MK808 is a tv stick which has rockchip rk3066 CPU inside, two usb ports >>> - host and otg, micro sd card slot and onboard wifi RK901. >>> >>> Signed-off-by: Paweł Jarosz <paweljarosz3691@gmail.com> >>> --- >>> >>> Changes in v2: >>> - included Heiko sugestion. >>> >>> Documentation/devicetree/bindings/arm/rockchip.txt | 4 + >>> arch/arm/boot/dts/Makefile | 1 + >>> arch/arm/boot/dts/rk3066a-mk808.dts | 184 >>> +++++++++++++++++++++ 3 files changed, 189 insertions(+) >>> create mode 100644 arch/arm/boot/dts/rk3066a-mk808.dts >>> >>> diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt >>> b/Documentation/devicetree/bindings/arm/rockchip.txt index >>> 55f388f..c09595b 100644 >>> --- a/Documentation/devicetree/bindings/arm/rockchip.txt >>> +++ b/Documentation/devicetree/bindings/arm/rockchip.txt >>> @@ -17,6 +17,10 @@ Rockchip platforms device tree bindings >>> >>> Required root node properties: >>> - compatible = "chipspark,rayeager-px2", "rockchip,rk3066a"; >>> >>> +- Rikomagic MK808 v1 board: >>> + Required root node properties: >>> + - compatible = "rikomagic,mk808", "rockchip,rk3066a"; >>> + >>> >>> - Radxa Rock board: >>> Required root node properties: >>> - compatible = "radxa,rock", "rockchip,rk3188"; >>> >>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile >>> index befcd26..f19cc1d 100644 >>> --- a/arch/arm/boot/dts/Makefile >>> +++ b/arch/arm/boot/dts/Makefile >>> @@ -639,6 +639,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \ >>> >>> rk3036-kylin.dtb \ >>> rk3066a-bqcurie2.dtb \ >>> rk3066a-marsboard.dtb \ >>> >>> + rk3066a-mk808.dtb \ >>> >>> rk3066a-rayeager.dtb \ >>> rk3188-radxarock.dtb \ >>> rk3228-evb.dtb \ >>> >>> diff --git a/arch/arm/boot/dts/rk3066a-mk808.dts >>> b/arch/arm/boot/dts/rk3066a-mk808.dts new file mode 100644 >>> index 0000000..2878562 >>> --- /dev/null >>> +++ b/arch/arm/boot/dts/rk3066a-mk808.dts >>> @@ -0,0 +1,184 @@ >>> +/* >>> + * Copyright (c) 2016 Paweł Jarosz <paweljarosz3691@gmail.com> >>> + * >>> + * This file is dual-licensed: you can use it either under the terms >>> + * of the GPL or the X11 license, at your option. Note that this dual >>> + * licensing only applies to this file, and not this project as a >>> + * whole. >>> + * >>> + * a) This file is free software; you can redistribute it and/or >>> + * modify it under the terms of the GNU General Public License as >>> + * published by the Free Software Foundation; either version 2 of the >>> + * License, or (at your option) any later version. >>> + * >>> + * This file is distributed in the hope that it will be useful, >>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of >>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the >>> + * GNU General Public License for more details. >>> + * >>> + * Or, alternatively, >>> + * >>> + * b) Permission is hereby granted, free of charge, to any person >>> + * obtaining a copy of this software and associated documentation >>> + * files (the "Software"), to deal in the Software without >>> + * restriction, including without limitation the rights to use, >>> + * copy, modify, merge, publish, distribute, sublicense, and/or >>> + * sell copies of the Software, and to permit persons to whom the >>> + * Software is furnished to do so, subject to the following >>> + * conditions: >>> + * >>> + * The above copyright notice and this permission notice shall be >>> + * included in all copies or substantial portions of the Software. >>> + * >>> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, >>> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES >>> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND >>> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT >>> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, >>> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING >>> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR >>> + * OTHER DEALINGS IN THE SOFTWARE. >>> + */ >>> + >>> +/dts-v1/; >>> +#include "rk3066a.dtsi" >>> + >>> +/ { >>> + model = "Rikomagic MK808"; >>> + compatible = "rikomagic,mk808", "rockchip,rk3066a"; >>> + >>> + chosen { >>> + stdout-path = "serial2:115200n8"; >>> + }; >>> + >>> + memory@60000000 { >>> + device_type = "memory"; >>> + reg = <0x60000000 0x40000000>; >>> + }; >>> + >>> + gpio-leds { >>> + compatible = "gpio-leds"; >>> + >>> + blue { >>> + label = "mk808:blue:power"; >>> + gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>; >>> + default-state = "off"; >>> + linux,default-trigger = "default-on"; >>> + }; >>> + }; >>> + >>> + mmc_pwrseq: mmc-pwrseq { >>> + compatible = "mmc-pwrseq-simple"; >>> + pinctrl-names = "default"; >>> + pinctrl-0 = <&sdmmc_pwr>; >> >> sd slot does not contain a reset pin. So the power pin should be >> enough. just add sdmmc_pwr to mmc0's pinctrl-0 and let mmc driver >> control it should be enough. Typically pwrseq is for emmc and sdio. >> We don't need a pwerseq to control power for sd slot.. >> >> But it seems sdmmc_pwr is a GPIO, but not functional port. >> So I am interesting that why MK808 board doesn't use the mmc >> controller's default power pin but chosing another gpio, so finally >> we have to add thses code for your DT. > > Actually, we always model the sd-mmc pwr-pin as gpio-based regulator (see > sdmmc-regulator for example in the rk3066a-rayeager.dts), and specifiy this > regulator as vmmc. That way the mmc core really can control the power. yes it did. There are two ways for us to control vmmc properly. If we use gpio-based regulator or PMIC, mmc core take over it to control the power correctly. But if we use the dafault functional port, namely SDMMC_PWREN, the dw_mmc driver could handle the control when doing set_ios.. Both of these two could work fine. But I always chose the latter one to simplify the dts. Anyway, I won't insist on it if it looks okay to you. :) > > > Heiko > > _______________________________________________ > Linux-rockchip mailing list > Linux-rockchip@lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-rockchip >
Am Samstag, 8. Oktober 2016, 11:01:08 schrieb Shawn Lin: > 在 2016/10/7 18:01, Heiko Stuebner 写道: > > Am Freitag, 7. Oktober 2016, 10:29:48 CEST schrieb Shawn Lin: > >> Hi Paweł , > >> > >> On 2016/10/7 1:38, Paweł Jarosz wrote: > >>> MK808 is a tv stick which has rockchip rk3066 CPU inside, two usb ports > >>> - host and otg, micro sd card slot and onboard wifi RK901. > >>> > >>> Signed-off-by: Paweł Jarosz <paweljarosz3691@gmail.com> > >>> --- > >>> > >>> Changes in v2: > >>> - included Heiko sugestion. > >>> > >>> Documentation/devicetree/bindings/arm/rockchip.txt | 4 + > >>> arch/arm/boot/dts/Makefile | 1 + > >>> arch/arm/boot/dts/rk3066a-mk808.dts | 184 > >>> +++++++++++++++++++++ 3 files changed, 189 insertions(+) > >>> create mode 100644 arch/arm/boot/dts/rk3066a-mk808.dts > >>> > >>> diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt > >>> b/Documentation/devicetree/bindings/arm/rockchip.txt index > >>> 55f388f..c09595b 100644 > >>> --- a/Documentation/devicetree/bindings/arm/rockchip.txt > >>> +++ b/Documentation/devicetree/bindings/arm/rockchip.txt > >>> @@ -17,6 +17,10 @@ Rockchip platforms device tree bindings > >>> > >>> Required root node properties: > >>> - compatible = "chipspark,rayeager-px2", "rockchip,rk3066a"; > >>> > >>> +- Rikomagic MK808 v1 board: > >>> + Required root node properties: > >>> + - compatible = "rikomagic,mk808", "rockchip,rk3066a"; > >>> + > >>> > >>> - Radxa Rock board: > >>> Required root node properties: > >>> - compatible = "radxa,rock", "rockchip,rk3188"; > >>> > >>> diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile > >>> index befcd26..f19cc1d 100644 > >>> --- a/arch/arm/boot/dts/Makefile > >>> +++ b/arch/arm/boot/dts/Makefile > >>> @@ -639,6 +639,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \ > >>> > >>> rk3036-kylin.dtb \ > >>> rk3066a-bqcurie2.dtb \ > >>> rk3066a-marsboard.dtb \ > >>> > >>> + rk3066a-mk808.dtb \ > >>> > >>> rk3066a-rayeager.dtb \ > >>> rk3188-radxarock.dtb \ > >>> rk3228-evb.dtb \ > >>> > >>> diff --git a/arch/arm/boot/dts/rk3066a-mk808.dts > >>> b/arch/arm/boot/dts/rk3066a-mk808.dts new file mode 100644 > >>> index 0000000..2878562 > >>> --- /dev/null > >>> +++ b/arch/arm/boot/dts/rk3066a-mk808.dts > >>> @@ -0,0 +1,184 @@ > >>> +/* > >>> + * Copyright (c) 2016 Paweł Jarosz <paweljarosz3691@gmail.com> > >>> + * > >>> + * This file is dual-licensed: you can use it either under the terms > >>> + * of the GPL or the X11 license, at your option. Note that this dual > >>> + * licensing only applies to this file, and not this project as a > >>> + * whole. > >>> + * > >>> + * a) This file is free software; you can redistribute it and/or > >>> + * modify it under the terms of the GNU General Public License as > >>> + * published by the Free Software Foundation; either version 2 of > >>> the > >>> + * License, or (at your option) any later version. > >>> + * > >>> + * This file is distributed in the hope that it will be useful, > >>> + * but WITHOUT ANY WARRANTY; without even the implied warranty of > >>> + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the > >>> + * GNU General Public License for more details. > >>> + * > >>> + * Or, alternatively, > >>> + * > >>> + * b) Permission is hereby granted, free of charge, to any person > >>> + * obtaining a copy of this software and associated documentation > >>> + * files (the "Software"), to deal in the Software without > >>> + * restriction, including without limitation the rights to use, > >>> + * copy, modify, merge, publish, distribute, sublicense, and/or > >>> + * sell copies of the Software, and to permit persons to whom the > >>> + * Software is furnished to do so, subject to the following > >>> + * conditions: > >>> + * > >>> + * The above copyright notice and this permission notice shall be > >>> + * included in all copies or substantial portions of the Software. > >>> + * > >>> + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, > >>> + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES > >>> + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND > >>> + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT > >>> + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, > >>> + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING > >>> + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR > >>> + * OTHER DEALINGS IN THE SOFTWARE. > >>> + */ > >>> + > >>> +/dts-v1/; > >>> +#include "rk3066a.dtsi" > >>> + > >>> +/ { > >>> + model = "Rikomagic MK808"; > >>> + compatible = "rikomagic,mk808", "rockchip,rk3066a"; > >>> + > >>> + chosen { > >>> + stdout-path = "serial2:115200n8"; > >>> + }; > >>> + > >>> + memory@60000000 { > >>> + device_type = "memory"; > >>> + reg = <0x60000000 0x40000000>; > >>> + }; > >>> + > >>> + gpio-leds { > >>> + compatible = "gpio-leds"; > >>> + > >>> + blue { > >>> + label = "mk808:blue:power"; > >>> + gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>; > >>> + default-state = "off"; > >>> + linux,default-trigger = "default-on"; > >>> + }; > >>> + }; > >>> + > >>> + mmc_pwrseq: mmc-pwrseq { > >>> + compatible = "mmc-pwrseq-simple"; > >>> + pinctrl-names = "default"; > >>> + pinctrl-0 = <&sdmmc_pwr>; > >> > >> sd slot does not contain a reset pin. So the power pin should be > >> enough. just add sdmmc_pwr to mmc0's pinctrl-0 and let mmc driver > >> control it should be enough. Typically pwrseq is for emmc and sdio. > >> We don't need a pwerseq to control power for sd slot.. > >> > >> But it seems sdmmc_pwr is a GPIO, but not functional port. > >> So I am interesting that why MK808 board doesn't use the mmc > >> controller's default power pin but chosing another gpio, so finally > >> we have to add thses code for your DT. > > > > Actually, we always model the sd-mmc pwr-pin as gpio-based regulator (see > > sdmmc-regulator for example in the rk3066a-rayeager.dts), and specifiy > > this > > regulator as vmmc. That way the mmc core really can control the power. > > yes it did. There are two ways for us to control vmmc properly. > If we use gpio-based regulator or PMIC, mmc core take over it > to control the power correctly. But if we use the dafault functional > port, namely SDMMC_PWREN, the dw_mmc driver could handle the control > when doing set_ios.. Both of these two could work fine. But I always > chose the latter one to simplify the dts. > > Anyway, I won't insist on it if it looks okay to you. :) yes, I'd really prefer the mmc subsystem explicitly controlling the cards power via a regulator :-) . Heiko
diff --git a/Documentation/devicetree/bindings/arm/rockchip.txt b/Documentation/devicetree/bindings/arm/rockchip.txt index 55f388f..c09595b 100644 --- a/Documentation/devicetree/bindings/arm/rockchip.txt +++ b/Documentation/devicetree/bindings/arm/rockchip.txt @@ -17,6 +17,10 @@ Rockchip platforms device tree bindings Required root node properties: - compatible = "chipspark,rayeager-px2", "rockchip,rk3066a"; +- Rikomagic MK808 v1 board: + Required root node properties: + - compatible = "rikomagic,mk808", "rockchip,rk3066a"; + - Radxa Rock board: Required root node properties: - compatible = "radxa,rock", "rockchip,rk3188"; diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile index befcd26..f19cc1d 100644 --- a/arch/arm/boot/dts/Makefile +++ b/arch/arm/boot/dts/Makefile @@ -639,6 +639,7 @@ dtb-$(CONFIG_ARCH_ROCKCHIP) += \ rk3036-kylin.dtb \ rk3066a-bqcurie2.dtb \ rk3066a-marsboard.dtb \ + rk3066a-mk808.dtb \ rk3066a-rayeager.dtb \ rk3188-radxarock.dtb \ rk3228-evb.dtb \ diff --git a/arch/arm/boot/dts/rk3066a-mk808.dts b/arch/arm/boot/dts/rk3066a-mk808.dts new file mode 100644 index 0000000..2878562 --- /dev/null +++ b/arch/arm/boot/dts/rk3066a-mk808.dts @@ -0,0 +1,184 @@ +/* + * Copyright (c) 2016 Paweł Jarosz <paweljarosz3691@gmail.com> + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of the + * License, or (at your option) any later version. + * + * This file is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "rk3066a.dtsi" + +/ { + model = "Rikomagic MK808"; + compatible = "rikomagic,mk808", "rockchip,rk3066a"; + + chosen { + stdout-path = "serial2:115200n8"; + }; + + memory@60000000 { + device_type = "memory"; + reg = <0x60000000 0x40000000>; + }; + + gpio-leds { + compatible = "gpio-leds"; + + blue { + label = "mk808:blue:power"; + gpios = <&gpio0 3 GPIO_ACTIVE_HIGH>; + default-state = "off"; + linux,default-trigger = "default-on"; + }; + }; + + mmc_pwrseq: mmc-pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&sdmmc_pwr>; + reset-gpios = <&gpio3 7 GPIO_ACTIVE_HIGH>; + }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_pwr>; + reset-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>; + }; + + vcc_io: vcc-io { + compatible = "regulator-fixed"; + regulator-name = "vcc_io"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-always-on; + }; + + vcc_host: usb-host-regulator { + compatible = "regulator-fixed"; + gpio = <&gpio0 6 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&host_drv>; + pinctrl-names = "default"; + regulator-always-on; + regulator-name = "host-pwr"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + startup-delay-us = <100000>; + vin-supply = <&vcc_io>; + }; + + vcc_otg: usb-otg-regulator { + compatible = "regulator-fixed"; + gpio = <&gpio0 5 GPIO_ACTIVE_HIGH>; + pinctrl-0 = <&otg_drv>; + pinctrl-names = "default"; + regulator-always-on; + regulator-name = "vcc_otg"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + startup-delay-us = <100000>; + vin-supply = <&vcc_io>; + }; +}; + +&mmc0 { + bus-width = <4>; + cap-mmc-highspeed; + cap-sd-highspeed; + mmc-pwrseq = <&mmc_pwrseq>; + num-slots = <1>; + status = "okay"; + vmmc-supply = <&vcc_io>; +}; + +&mmc1 { + bus-width = <4>; + disable-wp; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + num-slots = <1>; + status = "okay"; + vmmc-supply = <&vcc_io>; +}; + +&pinctrl { + usb-host { + host_drv: host-drv { + rockchip,pins = <RK_GPIO0 6 RK_FUNC_GPIO &pcfg_pull_default>; + }; + }; + + usb-otg { + otg_drv: otg-drv { + rockchip,pins = <RK_GPIO0 5 RK_FUNC_GPIO &pcfg_pull_default>; + }; + }; + + sdmmc { + sdmmc_pwr: sdmmc-pwr { + rockchip,pins = <RK_GPIO3 7 RK_FUNC_GPIO &pcfg_pull_default>; + }; + }; + + sdio { + wifi_pwr: wifi-pwr { + rockchip,pins = <RK_GPIO3 24 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&uart2 { + status = "okay"; +}; + +&usb_host { + status = "okay"; +}; + +&usb_otg { + status = "okay"; +}; + +&usbphy { + status = "okay"; +}; + +&wdt { + status = "okay"; +}; +
MK808 is a tv stick which has rockchip rk3066 CPU inside, two usb ports - host and otg, micro sd card slot and onboard wifi RK901. Signed-off-by: Paweł Jarosz <paweljarosz3691@gmail.com> --- Changes in v2: - included Heiko sugestion. Documentation/devicetree/bindings/arm/rockchip.txt | 4 + arch/arm/boot/dts/Makefile | 1 + arch/arm/boot/dts/rk3066a-mk808.dts | 184 +++++++++++++++++++++ 3 files changed, 189 insertions(+) create mode 100644 arch/arm/boot/dts/rk3066a-mk808.dts