Message ID | 1475464365-18437-10-git-send-email-sjg@chromium.org |
---|---|
State | Superseded |
Delegated to: | Bin Meng |
Headers | show |
Hi Simon, On Mon, Oct 3, 2016 at 11:12 AM, Simon Glass <sjg@chromium.org> wrote: > Provide a function to run the Vesa BIOS for a given PCI device and obtain > the resulting configuration (e.g. display size) for use by the video > uclass. This makes it easier to write a video driver that uses vesa and > supports driver model. > > Signed-off-by: Simon Glass <sjg@chromium.org> > --- > > drivers/pci/pci_rom.c | 55 +++++++++++++++++++++++++++++++++++++++++++++++++++ > include/vbe.h | 2 ++ > 2 files changed, 57 insertions(+) > > diff --git a/drivers/pci/pci_rom.c b/drivers/pci/pci_rom.c > index 399055b..1805dac 100644 > --- a/drivers/pci/pci_rom.c > +++ b/drivers/pci/pci_rom.c > @@ -31,6 +31,7 @@ > #include <pci.h> > #include <pci_rom.h> > #include <vbe.h> > +#include <video.h> > #include <video_fb.h> > #include <linux/screen_info.h> > > @@ -348,3 +349,57 @@ err: > free(ram); > return ret; > } > + > +#ifdef CONFIG_DM_VIDEO > +int vbe_setup_video_priv(struct vesa_mode_info *vesa, Should this be static? I believe so. > + struct video_priv *uc_priv, > + struct video_uc_platdata *plat) > +{ > + if (!vesa->x_resolution) > + return -ENXIO; > + uc_priv->xsize = vesa->x_resolution; > + uc_priv->ysize = vesa->y_resolution; > + switch (vesa->bits_per_pixel) { > + case 32: > + case 24: > + uc_priv->bpix = VIDEO_BPP32; > + break; > + case 16: > + uc_priv->bpix = VIDEO_BPP16; > + break; > + default: > + return -EPROTONOSUPPORT; > + } > + plat->base = vesa->phys_base_ptr; > + plat->size = vesa->bytes_per_scanline * vesa->y_resolution; > + > + return 0; > +} > + > +int vbe_setup_video(struct udevice *dev, int (*int15_handler)(void)) > +{ > + struct video_uc_platdata *plat = dev_get_uclass_platdata(dev); > + struct video_priv *uc_priv = dev_get_uclass_priv(dev); > + int ret; > + > + /* If we are running from EFI or coreboot, this can't work */ > + if (!ll_boot_init()) > + return -EPERM; > + bootstage_start(BOOTSTAGE_ID_ACCUM_LCD, "vesa display"); > + ret = dm_pci_run_vga_bios(dev, int15_handler, PCI_ROM_USE_NATIVE | > + PCI_ROM_ALLOW_FALLBACK); > + bootstage_accum(BOOTSTAGE_ID_ACCUM_LCD); > + if (ret) { > + debug("failed to run video BIOS: %d\n", ret); > + return ret; > + } > + > + ret = vbe_setup_video_priv(&mode_info.vesa, uc_priv, plat); > + if (ret) { > + debug("No video mode configured\n"); > + return ret; > + } > + > + return 0; > +} > +#endif > diff --git a/include/vbe.h b/include/vbe.h > index 164ccae..a743892 100644 > --- a/include/vbe.h > +++ b/include/vbe.h > @@ -106,5 +106,7 @@ extern struct vbe_mode_info mode_info; > > struct graphic_device; > int vbe_get_video_info(struct graphic_device *gdev); > +struct video_priv; > +int vbe_setup_video(struct udevice *dev, int (*int15_handler)(void)); > > #endif > -- Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Regards, Bin
diff --git a/drivers/pci/pci_rom.c b/drivers/pci/pci_rom.c index 399055b..1805dac 100644 --- a/drivers/pci/pci_rom.c +++ b/drivers/pci/pci_rom.c @@ -31,6 +31,7 @@ #include <pci.h> #include <pci_rom.h> #include <vbe.h> +#include <video.h> #include <video_fb.h> #include <linux/screen_info.h> @@ -348,3 +349,57 @@ err: free(ram); return ret; } + +#ifdef CONFIG_DM_VIDEO +int vbe_setup_video_priv(struct vesa_mode_info *vesa, + struct video_priv *uc_priv, + struct video_uc_platdata *plat) +{ + if (!vesa->x_resolution) + return -ENXIO; + uc_priv->xsize = vesa->x_resolution; + uc_priv->ysize = vesa->y_resolution; + switch (vesa->bits_per_pixel) { + case 32: + case 24: + uc_priv->bpix = VIDEO_BPP32; + break; + case 16: + uc_priv->bpix = VIDEO_BPP16; + break; + default: + return -EPROTONOSUPPORT; + } + plat->base = vesa->phys_base_ptr; + plat->size = vesa->bytes_per_scanline * vesa->y_resolution; + + return 0; +} + +int vbe_setup_video(struct udevice *dev, int (*int15_handler)(void)) +{ + struct video_uc_platdata *plat = dev_get_uclass_platdata(dev); + struct video_priv *uc_priv = dev_get_uclass_priv(dev); + int ret; + + /* If we are running from EFI or coreboot, this can't work */ + if (!ll_boot_init()) + return -EPERM; + bootstage_start(BOOTSTAGE_ID_ACCUM_LCD, "vesa display"); + ret = dm_pci_run_vga_bios(dev, int15_handler, PCI_ROM_USE_NATIVE | + PCI_ROM_ALLOW_FALLBACK); + bootstage_accum(BOOTSTAGE_ID_ACCUM_LCD); + if (ret) { + debug("failed to run video BIOS: %d\n", ret); + return ret; + } + + ret = vbe_setup_video_priv(&mode_info.vesa, uc_priv, plat); + if (ret) { + debug("No video mode configured\n"); + return ret; + } + + return 0; +} +#endif diff --git a/include/vbe.h b/include/vbe.h index 164ccae..a743892 100644 --- a/include/vbe.h +++ b/include/vbe.h @@ -106,5 +106,7 @@ extern struct vbe_mode_info mode_info; struct graphic_device; int vbe_get_video_info(struct graphic_device *gdev); +struct video_priv; +int vbe_setup_video(struct udevice *dev, int (*int15_handler)(void)); #endif
Provide a function to run the Vesa BIOS for a given PCI device and obtain the resulting configuration (e.g. display size) for use by the video uclass. This makes it easier to write a video driver that uses vesa and supports driver model. Signed-off-by: Simon Glass <sjg@chromium.org> --- drivers/pci/pci_rom.c | 55 +++++++++++++++++++++++++++++++++++++++++++++++++++ include/vbe.h | 2 ++ 2 files changed, 57 insertions(+)