diff mbox

[U-Boot,1/2] lpuart: add a get_lpuart_clk function

Message ID 1474957302-10744-1-git-send-email-shh.xie@gmail.com
State Accepted
Commit 9b46213b4f63578be2fbcf6b0532a0a8d4b5edb0
Delegated to: York Sun
Headers show

Commit Message

shaohui xie Sept. 27, 2016, 6:21 a.m. UTC 
From: Shaohui Xie <Shaohui.Xie@nxp.com>

It's not always true that LPUART clock is CONFIG_SYS_CLK_FREQ, this
patch provides a weak function get_lpuart_clk, so that the clock can be
ovreride on a specific board which uses different clock for LPUART.

Signed-off-by: Shaohui Xie <Shaohui.Xie@nxp.com>
---
 drivers/serial/serial_lpuart.c | 7 ++++++-
 1 file changed, 6 insertions(+), 1 deletion(-)
diff mbox

Patch

diff --git a/drivers/serial/serial_lpuart.c b/drivers/serial/serial_lpuart.c
index 042e9a2..beb4243 100644
--- a/drivers/serial/serial_lpuart.c
+++ b/drivers/serial/serial_lpuart.c
@@ -170,9 +170,14 @@  static int lpuart_serial_probe(struct udevice *dev)
 }
 #else
 
+u32 __weak get_lpuart_clk(void)
+{
+	return CONFIG_SYS_CLK_FREQ;
+}
+
 static void _lpuart32_serial_setbrg(struct lpuart_fsl *base, int baudrate)
 {
-	u32 clk = CONFIG_SYS_CLK_FREQ;
+	u32 clk = get_lpuart_clk();
 	u32 sbr;
 
 	sbr = (clk / (16 * baudrate));