diff mbox

[v2] Net Driver: Add Cypress GX3 VID=04b4 PID=3610.

Message ID 271e26e7350f418bad08761cab439005@Mail06.usask.ca
State Changes Requested, archived
Delegated to: David Miller
Headers show

Commit Message

ASIX_Allan [Office] Sept. 26, 2016, 9:48 p.m. UTC 
From: Chris Roth <chris.roth@usask.ca>

Add support for Cypress GX3 SuperSpeed to Gigabit Ethernet
Bridge Controller (Vendor=04b4 ProdID=3610).

Patch verified on x64 linux kernel 4.7.4 system with the
Kensington SD4600P USB-C Universal Dock with Power, which uses the
Cypress GX3 SuperSpeed to Gigabit Ethernet Bridge Controller.

A similar patch was signed-off and tested-by Allan Chou
<allan@asix.com.tw> on 2015-12-01.

Allan verified his similar patch on x86 Linux kernel 4.1.6 system
with Cypress GX3 SuperSpeed to Gigabit Ethernet Bridge Controller.

Tested-by: Allan Chou <allan@asix.com.tw>
Tested-by: Chris Roth <chris.roth@usask.ca>

Signed-off-by: Allan Chou <allan@asix.com.tw>
Signed-off-by: Chris Roth <chris.roth@usask.ca>
---
 drivers/net/usb/ax88179_178a.c | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

Comments

gregkh@linuxfoundation.org Sept. 27, 2016, 3:40 p.m. UTC | #1 
On Mon, Sep 26, 2016 at 03:56:59PM -0600, Chris Roth wrote:
> I'm not sure what I'm doing wrong:
> 
> I'm trying to get the from statement to read original author (Allan
> Chou) first, and then me (Chris Roth) second. I've used the following
> two commands:
> 
> git format-patch -o /tmp/ --subject-prefix="PATCH v2" --from="Allan
> Chou <allan@asix.com.tw>" HEAD^
> 
> and
> 
> git send-email --to linux-usb@vger.kernel.org --to
> netdev@vger.kernel.org --to linux-kernel@vger.kernel.org --from="Allan
> Chou <allan@asix.com.tw>"
> /tmp/0001-Net-Driver-Add-Cypress-GX3-VID-04b4-PID-3610.patch
> 
> I thought that adding the --from portions to the git format-patch and
> git send-email commands would force the addition of Allan to the top
> of the patch, but it hasn't. Can anyone tell me specifically how I
> need to change these commands in order to get the desired result? Then
> I'll submit a PATCH v3.

Take the patch that you have, hand-edit it with your favorite editor to
have the correct headers and signed-off-by and other fields, and then
use git send-email without the --from line, and you should be fine.

thanks,

greg k-h
diff mbox

Patch

diff --git a/drivers/net/usb/ax88179_178a.c b/drivers/net/usb/ax88179_178a.c
index e6338c1..8a6675d 100644
--- a/drivers/net/usb/ax88179_178a.c
+++ b/drivers/net/usb/ax88179_178a.c
@@ -1656,6 +1656,19 @@  static const struct driver_info ax88178a_info = {
 	.tx_fixup = ax88179_tx_fixup,
 };
 
+static const struct driver_info cypress_GX3_info = {
+	.description = "Cypress GX3 SuperSpeed to Gigabit Ethernet Controller",
+	.bind = ax88179_bind,
+	.unbind = ax88179_unbind,
+	.status = ax88179_status,
+	.link_reset = ax88179_link_reset,
+	.reset = ax88179_reset,
+	.stop = ax88179_stop,
+	.flags = FLAG_ETHER | FLAG_FRAMING_AX,
+	.rx_fixup = ax88179_rx_fixup,
+	.tx_fixup = ax88179_tx_fixup,
+};
+
 static const struct driver_info dlink_dub1312_info = {
 	.description = "D-Link DUB-1312 USB 3.0 to Gigabit Ethernet Adapter",
 	.bind = ax88179_bind,
@@ -1718,6 +1731,10 @@  static const struct usb_device_id products[] = {
 	USB_DEVICE(0x0b95, 0x178a),
 	.driver_info = (unsigned long)&ax88178a_info,
 }, {
+	/* Cypress GX3 SuperSpeed to Gigabit Ethernet Bridge Controller */
+	USB_DEVICE(0x04b4, 0x3610),
+	.driver_info = (unsigned long)&cypress_GX3_info,
+}, {
 	/* D-Link DUB-1312 USB 3.0 to Gigabit Ethernet Adapter */
 	USB_DEVICE(0x2001, 0x4a00),
 	.driver_info = (unsigned long)&dlink_dub1312_info,