diff mbox

[RFC,v2,net-next,7/8] net: qualcomm: make qca_common a separate kernel module

Message ID 1474888086-514-8-git-send-email-stefan.wahren@i2se.com
State RFC, archived
Delegated to: David Miller
Headers show

Commit Message

Stefan Wahren Sept. 26, 2016, 11:08 a.m. UTC
In order to share common functions between QCA7000 SPI and UART protocol
driver the qca_common needs to be a separate kernel module.

Signed-off-by: Stefan Wahren <stefan.wahren@i2se.com>
---
 drivers/net/ethernet/qualcomm/Kconfig      |  8 +++++++-
 drivers/net/ethernet/qualcomm/Makefile     |  5 +++--
 drivers/net/ethernet/qualcomm/qca_common.c | 11 +++++++++++
 3 files changed, 21 insertions(+), 3 deletions(-)
diff mbox

Patch

diff --git a/drivers/net/ethernet/qualcomm/Kconfig b/drivers/net/ethernet/qualcomm/Kconfig
index 9ba568d..0d33728 100644
--- a/drivers/net/ethernet/qualcomm/Kconfig
+++ b/drivers/net/ethernet/qualcomm/Kconfig
@@ -16,7 +16,13 @@  config NET_VENDOR_QUALCOMM
 if NET_VENDOR_QUALCOMM
 
 config QCA7000
-	tristate "Qualcomm Atheros QCA7000 support"
+	tristate
+	help
+	  This enables support for the Qualcomm Atheros QCA7000.
+
+config QCA7000_SPI
+	tristate "Qualcomm Atheros QCA7000 SPI support"
+	select QCA7000
 	depends on SPI_MASTER && OF
 	---help---
 	  This SPI protocol driver supports the Qualcomm Atheros QCA7000.
diff --git a/drivers/net/ethernet/qualcomm/Makefile b/drivers/net/ethernet/qualcomm/Makefile
index 8080570..00d8729 100644
--- a/drivers/net/ethernet/qualcomm/Makefile
+++ b/drivers/net/ethernet/qualcomm/Makefile
@@ -2,7 +2,8 @@ 
 # Makefile for the Qualcomm network device drivers.
 #
 
-obj-$(CONFIG_QCA7000) += qcaspi.o
-qcaspi-objs := qca_spi.o qca_common.o qca_7k.o qca_debug.o
+obj-$(CONFIG_QCA7000) += qca_common.o
+obj-$(CONFIG_QCA7000_SPI) += qcaspi.o
+qcaspi-objs := qca_7k.o qca_debug.o qca_spi.o
 
 obj-y += emac/
diff --git a/drivers/net/ethernet/qualcomm/qca_common.c b/drivers/net/ethernet/qualcomm/qca_common.c
index 7eefdad..2fa8c18 100644
--- a/drivers/net/ethernet/qualcomm/qca_common.c
+++ b/drivers/net/ethernet/qualcomm/qca_common.c
@@ -21,7 +21,9 @@ 
  *   by an atheros frame while transmitted over a serial channel;
  */
 
+#include <linux/init.h>
 #include <linux/kernel.h>
+#include <linux/module.h>
 
 #include "qca_common.h"
 
@@ -46,6 +48,7 @@  qcafrm_create_header(u8 *buf, u16 length)
 
 	return QCAFRM_HEADER_LEN;
 }
+EXPORT_SYMBOL_GPL(qcafrm_create_header);
 
 u16
 qcafrm_create_footer(u8 *buf)
@@ -57,6 +60,7 @@  qcafrm_create_footer(u8 *buf)
 	buf[1] = 0x55;
 	return QCAFRM_FOOTER_LEN;
 }
+EXPORT_SYMBOL_GPL(qcafrm_create_footer);
 
 /*   Gather received bytes and try to extract a full ethernet frame by
  *   following a simple state machine.
@@ -154,6 +158,7 @@  qcafrm_fsm_decode(struct qcafrm_handle *handle, u8 *buf, u16 buf_len, u8 recv_by
 
 	return ret;
 }
+EXPORT_SYMBOL_GPL(qcafrm_fsm_decode);
 
 int
 qcacmn_netdev_change_mtu(struct net_device *dev, int new_mtu)
@@ -165,3 +170,9 @@  qcacmn_netdev_change_mtu(struct net_device *dev, int new_mtu)
 
 	return 0;
 }
+EXPORT_SYMBOL_GPL(qcacmn_netdev_change_mtu);
+
+MODULE_DESCRIPTION("Qualcomm Atheros Common");
+MODULE_AUTHOR("Qualcomm Atheros Communications");
+MODULE_AUTHOR("Stefan Wahren <stefan.wahren@i2se.com>");
+MODULE_LICENSE("Dual BSD/GPL");