diff mbox

[v3] i2c-eg20t: fix race between i2c init and interrupt enable

Message ID 1474506584-25153-2-git-send-email-yadi.hu@windriver.com
State Awaiting Upstream
Headers show

Commit Message

Yadi Hu Sept. 22, 2016, 1:09 a.m. UTC 
From: "Yadi.hu" <yadi.hu@windriver.com>

the eg20t driver call request_irq() function before the pch_base_address,
base address of i2c controller's register, is assigned an effective value.

there is one possible scenario that an interrupt which isn't inside eg20t
arrives immediately after request_irq() is executed when i2c controller
shares an interrupt number with others. since the interrupt handler
pch_i2c_handler() has already active as shared action, it will be called
and read its own register to determine if this interrupt is from itself.

At that moment, since base address of i2c registers is not remapped
in kernel space yet,so the INT handler will access an illegal address
and then a error occurs.

Signed-off-by: Yadi.hu <yadi.hu@windriver.com>
---
 drivers/i2c/busses/i2c-eg20t.c | 18 +++++++++++-------
 1 file changed, 11 insertions(+), 7 deletions(-)
diff mbox

Patch

diff --git a/drivers/i2c/busses/i2c-eg20t.c b/drivers/i2c/busses/i2c-eg20t.c
index 137125b..5ce71ce 100644
--- a/drivers/i2c/busses/i2c-eg20t.c
+++ b/drivers/i2c/busses/i2c-eg20t.c
@@ -773,13 +773,6 @@  static int pch_i2c_probe(struct pci_dev *pdev,
 	/* Set the number of I2C channel instance */
 	adap_info->ch_num = id->driver_data;
 
-	ret = request_irq(pdev->irq, pch_i2c_handler, IRQF_SHARED,
-		  KBUILD_MODNAME, adap_info);
-	if (ret) {
-		pch_pci_err(pdev, "request_irq FAILED\n");
-		goto err_request_irq;
-	}
-
 	for (i = 0; i < adap_info->ch_num; i++) {
 		pch_adap = &adap_info->pch_data[i].pch_adapter;
 		adap_info->pch_i2c_suspended = false;
@@ -797,6 +790,17 @@  static int pch_i2c_probe(struct pci_dev *pdev,
 
 		pch_adap->dev.of_node = pdev->dev.of_node;
 		pch_adap->dev.parent = &pdev->dev;
+	}
+
+	ret = request_irq(pdev->irq, pch_i2c_handler, IRQF_SHARED,
+		  KBUILD_MODNAME, adap_info);
+	if (ret) {
+		pch_pci_err(pdev, "request_irq FAILED\n");
+		goto err_request_irq;
+	}
+
+	for (i = 0; i < adap_info->ch_num; i++) {
+		pch_adap = &adap_info->pch_data[i].pch_adapter;
 
 		pch_i2c_init(&adap_info->pch_data[i]);