@@ -18,7 +18,6 @@
#define CONFIG_EXTRA_ENV_KS2_BOARD_SETTINGS \
DEFAULT_FW_INITRAMFS_BOOT_ENV \
"boot=ubi\0" \
- "addr_mon=0x0c140000\0" \
"args_ubi=setenv bootargs ${bootargs} rootfstype=ubifs " \
"root=ubi0:rootfs rootflags=sync rw ubi.mtd=ubifs,2048\0" \
"name_fdt=keystone-k2e-evm.dtb\0" \
@@ -24,7 +24,6 @@
"bootpart=0:2\0" \
"bootdir=/boot\0" \
"rd_spec=-\0" \
- "addr_mon=0x0c040000\0" \
"args_ubi=setenv bootargs ${bootargs} rootfstype=ubifs " \
"root=ubi0:rootfs rootflags=sync rw ubi.mtd=ubifs,2048\0" \
"name_fdt=keystone-k2g-evm.dtb\0" \
@@ -44,9 +43,8 @@
#define CONFIG_BOOTCOMMAND \
"run envboot; " \
"run set_name_pmmc init_${boot} init_fw_rd_${boot} " \
- "get_pmmc_${boot} run_pmmc " \
- "get_fdt_${boot} get_mon_${boot} get_kern_${boot} " \
- "run_mon run_kern"
+ "get_pmmc_${boot} run_pmmc get_mon_${boot} run_mon " \
+ "get_fdt_${boot} get_kern_${boot} run_kern"
#include <configs/ti_armv7_keystone2.h>
@@ -18,7 +18,6 @@
#define CONFIG_EXTRA_ENV_KS2_BOARD_SETTINGS \
DEFAULT_FW_INITRAMFS_BOOT_ENV \
"boot=ubi\0" \
- "addr_mon=0x0c5f0000\0" \
"args_ubi=setenv bootargs ${bootargs} rootfstype=ubifs " \
"root=ubi0:rootfs rootflags=sync rw ubi.mtd=ubifs,2048\0" \
"name_fdt=keystone-k2hk-evm.dtb\0" \
@@ -18,7 +18,6 @@
#define CONFIG_EXTRA_ENV_KS2_BOARD_SETTINGS \
DEFAULT_FW_INITRAMFS_BOOT_ENV \
"boot=ubi\0" \
- "addr_mon=0x0c140000\0" \
"args_ubi=setenv bootargs ${bootargs} rootfstype=ubifs " \
"root=ubi0:rootfs rootflags=sync rw ubi.mtd=ubifs,4096\0" \
"name_fdt=keystone-k2l-evm.dtb\0" \
@@ -250,6 +250,7 @@
"addr_ubi=0x82000000\0" \
"addr_secdb_key=0xc000000\0" \
"name_kern=zImage\0" \
+ "addr_mon=0x87000000\0" \
"run_mon=mon_install ${addr_mon}\0" \
"run_kern=bootz ${loadaddr} ${rd_spec} ${fdtaddr}\0" \
"init_net=run args_all args_net\0" \
@@ -294,8 +295,8 @@
#ifndef CONFIG_BOOTCOMMAND
#define CONFIG_BOOTCOMMAND \
- "run init_${boot} init_fw_rd_${boot} get_fdt_${boot} " \
- "get_mon_${boot} get_kern_${boot} run_mon run_kern"
+ "run init_${boot} get_mon_${boot} run_mon init_fw_rd_${boot} " \
+ "get_fdt_${boot} get_kern_${boot} run_kern"
#endif
#define CONFIG_BOOTARGS \
As boot monitor contains a mkimage header, it can be loaded at any location. So, have a common addr_mon address across all keystone2 SoCs. And also making sure that boot monitor is installed early during default boot to avoid any overlapping with other images. Signed-off-by: Lokesh Vutla <lokeshvutla@ti.com> --- - This is based on top of https://patchwork.ozlabs.org/patch/670426/ include/configs/k2e_evm.h | 1 - include/configs/k2g_evm.h | 6 ++---- include/configs/k2hk_evm.h | 1 - include/configs/k2l_evm.h | 1 - include/configs/ti_armv7_keystone2.h | 5 +++-- 5 files changed, 5 insertions(+), 9 deletions(-)