diff mbox

[v2,2/3] pinctrl: sh-pfc: r8a7791: Implement voltage switching for SDHI

Message ID 1473665795-7418-3-git-send-email-horms+renesas@verge.net.au
State New
Headers show

Commit Message

Simon Horman Sept. 12, 2016, 7:36 a.m. UTC 
All the SHDIs can operate with either 3.3V or 1.8V signals, depending
on negotiation with the card.

Based on work by Wolfram Sang for the r8a7790.

Cc: Wolfram Sang <wsa+renesas@sang-engineering.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Acked-by: Wolfram Sang <wsa+renesas@sang-engineering.com>
---
v2
* Correct comment above CPU_ALL_PORT
---
 drivers/pinctrl/sh-pfc/pfc-r8a7791.c | 29 ++++++++++++++++++++++++++++-
 1 file changed, 28 insertions(+), 1 deletion(-)
diff mbox

Patch

diff --git a/drivers/pinctrl/sh-pfc/pfc-r8a7791.c b/drivers/pinctrl/sh-pfc/pfc-r8a7791.c
index 0c1a60c9a844..7ca37c3019ab 100644
--- a/drivers/pinctrl/sh-pfc/pfc-r8a7791.c
+++ b/drivers/pinctrl/sh-pfc/pfc-r8a7791.c
@@ -13,6 +13,10 @@ 
 
 #include "sh_pfc.h"
 
+/*
+ * Pins 0-23 assigned to GPIO bank 6 can be used for SD interfaces in
+ * which case they support both 3.3V and 1.8V signalling.
+ */
 #define CPU_ALL_PORT(fn, sfx)						\
 	PORT_GP_32(0, fn, sfx),						\
 	PORT_GP_26(1, fn, sfx),						\
@@ -20,7 +24,15 @@ 
 	PORT_GP_32(3, fn, sfx),						\
 	PORT_GP_32(4, fn, sfx),						\
 	PORT_GP_32(5, fn, sfx),						\
-	PORT_GP_32(6, fn, sfx),						\
+	PORT_GP_CFG_24(6, fn, sfx, SH_PFC_PIN_CFG_IO_VOLTAGE),		\
+	PORT_GP_1(6, 24, fn, sfx),					\
+	PORT_GP_1(6, 25, fn, sfx),					\
+	PORT_GP_1(6, 26, fn, sfx),					\
+	PORT_GP_1(6, 27, fn, sfx),					\
+	PORT_GP_1(6, 28, fn, sfx),					\
+	PORT_GP_1(6, 29, fn, sfx),					\
+	PORT_GP_1(6, 30, fn, sfx),					\
+	PORT_GP_1(6, 31, fn, sfx),					\
 	PORT_GP_26(7, fn, sfx)
 
 enum {
@@ -6404,9 +6416,24 @@  static const struct pinmux_cfg_reg pinmux_config_regs[] = {
 	{ },
 };
 
+static int r8a7791_pin_to_pocctrl(struct sh_pfc *pfc, unsigned int pin, u32 *pocctrl)
+{
+	if (pin < RCAR_GP_PIN(6, 0) || pin > RCAR_GP_PIN(6, 23))
+		return -EINVAL;
+
+	*pocctrl = 0xe606008c;
+
+	return 31 - (pin & 0x1f);
+}
+
+static const struct sh_pfc_soc_operations r8a7791_pinmux_ops = {
+	.pin_to_pocctrl = r8a7791_pin_to_pocctrl,
+};
+
 #ifdef CONFIG_PINCTRL_PFC_R8A7791
 const struct sh_pfc_soc_info r8a7791_pinmux_info = {
 	.name = "r8a77910_pfc",
+	.ops = &r8a7791_pinmux_ops,
 	.unlock_reg = 0xe6060000, /* PMMR */
 
 	.function = { PINMUX_FUNCTION_BEGIN, PINMUX_FUNCTION_END },