diff mbox

[net,2/2] mlxsw: spectrum: Set port type before setting its address

Message ID 1473315362-1984-3-git-send-email-jiri@resnulli.us
State Accepted, archived
Delegated to: David Miller
Headers show

Commit Message

Jiri Pirko Sept. 8, 2016, 6:16 a.m. UTC 
From: Ido Schimmel <idosch@mellanox.com>

During port init, we currently set the port's type to Ethernet after
setting its MAC address. However, the hardware documentation states this
should be the other way around.

Align the driver with the hardware documentation and set the port's MAC
address after setting its type.

Fixes: 56ade8fe3fe1 ("mlxsw: spectrum: Add initial support for Spectrum ASIC")
Signed-off-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
---
 drivers/net/ethernet/mellanox/mlxsw/spectrum.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)
diff mbox

Patch

diff --git a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
index e16b347..d48873b 100644
--- a/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
+++ b/drivers/net/ethernet/mellanox/mlxsw/spectrum.c
@@ -2106,6 +2106,13 @@  static int mlxsw_sp_port_create(struct mlxsw_sp *mlxsw_sp, u8 local_port,
 	dev->netdev_ops = &mlxsw_sp_port_netdev_ops;
 	dev->ethtool_ops = &mlxsw_sp_port_ethtool_ops;
 
+	err = mlxsw_sp_port_swid_set(mlxsw_sp_port, 0);
+	if (err) {
+		dev_err(mlxsw_sp->bus_info->dev, "Port %d: Failed to set SWID\n",
+			mlxsw_sp_port->local_port);
+		goto err_port_swid_set;
+	}
+
 	err = mlxsw_sp_port_dev_addr_init(mlxsw_sp_port);
 	if (err) {
 		dev_err(mlxsw_sp->bus_info->dev, "Port %d: Unable to init port mac address\n",
@@ -2131,13 +2138,6 @@  static int mlxsw_sp_port_create(struct mlxsw_sp *mlxsw_sp, u8 local_port,
 		goto err_port_system_port_mapping_set;
 	}
 
-	err = mlxsw_sp_port_swid_set(mlxsw_sp_port, 0);
-	if (err) {
-		dev_err(mlxsw_sp->bus_info->dev, "Port %d: Failed to set SWID\n",
-			mlxsw_sp_port->local_port);
-		goto err_port_swid_set;
-	}
-
 	err = mlxsw_sp_port_speed_by_width_set(mlxsw_sp_port, width);
 	if (err) {
 		dev_err(mlxsw_sp->bus_info->dev, "Port %d: Failed to enable speeds\n",
@@ -2219,10 +2219,10 @@  err_port_buffers_init:
 err_port_admin_status_set:
 err_port_mtu_set:
 err_port_speed_by_width_set:
-	mlxsw_sp_port_swid_set(mlxsw_sp_port, MLXSW_PORT_SWID_DISABLED_PORT);
-err_port_swid_set:
 err_port_system_port_mapping_set:
 err_dev_addr_init:
+	mlxsw_sp_port_swid_set(mlxsw_sp_port, MLXSW_PORT_SWID_DISABLED_PORT);
+err_port_swid_set:
 	free_percpu(mlxsw_sp_port->pcpu_stats);
 err_alloc_stats:
 	kfree(mlxsw_sp_port->untagged_vlans);