@@ -23,5 +23,53 @@ config ZYNQMP_USB
config SYS_MALLOC_F_LEN
default 0x600
+config SPL_ZYNQMP_ALT_BOOTMODE_ENABLED
+ bool "Overwrite SPL bootmode"
+ depends on SPL
+ help
+ Overwrite bootmode selected via boot mode pins to tell SPL what should
+ be the next boot device.
+
+config SPL_ZYNQMP_ALT_BOOTMODE
+ hex
+ default 0x0 if JTAG_MODE
+ default 0x1 if QSPI_MODE_24BIT
+ default 0x2 if QSPI_MODE_32BIT
+ default 0x3 if SD_MODE
+ default 0x4 if NAND_MODE
+ default 0x5 if SD_MODE1
+ default 0x6 if EMMC_MODE
+ default 0x7 if USB_MODE
+
+choice
+ prompt "Boot mode"
+ depends on ZYNQMP_ALT_BOOTMODE_ENABLED
+ default JTAG
+
+config JTAG_MODE
+ bool "JTAG_MODE"
+
+config QSPI_MODE_24BIT
+ bool "QSPI_MODE_24BIT"
+
+config QSPI_MODE_32BIT
+ bool "QSPI_MODE_32BIT"
+
+config SD_MODE
+ bool "SD_MODE"
+
+config SD_MODE1
+ bool "SD_MODE1"
+
+config NAND_MODE
+ bool "NAND_MODE"
+
+config EMMC_MODE
+ bool "EMMC_MODE"
+
+config USB_MODE
+ bool "USB"
+
+endchoice
endif
@@ -48,6 +48,13 @@ u32 spl_boot_device(void)
u32 reg = 0;
u8 bootmode;
+#if defined(CONFIG_SPL_ZYNQMP_ALT_BOOTMODE_ENABLED)
+ /* Change default boot mode at run-time */
+ writel(BOOT_MODE_USE_ALT |
+ CONFIG_SPL_ZYNQMP_ALT_BOOTMODE << BOOT_MODE_ALT_SHIFT,
+ &crlapb_base->boot_mode);
+#endif
+
reg = readl(&crlapb_base->boot_mode);
bootmode = reg & BOOT_MODES_MASK;
@@ -70,6 +70,8 @@ struct iou_scntr_secure {
#define NAND_MODE 0x00000004
#define EMMC_MODE 0x00000006
#define JTAG_MODE 0x00000000
+#define BOOT_MODE_USE_ALT 0x100
+#define BOOT_MODE_ALT_SHIFT 12
#define ZYNQMP_IOU_SLCR_BASEADDR 0xFF180000
ZynqMP provides an option to overwrite bootmode setting which can change SPL behavior. For example: boot SPL via JTAG and then SPL loads images from SD. Signed-off-by: Michal Simek <michal.simek@xilinx.com> --- Is there any way how to use symbols from headers? Currently Kconfig just copies values from hardware.h and will be great to have a way to have these values just at one location. --- arch/arm/cpu/armv8/zynqmp/Kconfig | 48 +++++++++++++++++++++++++++++ arch/arm/cpu/armv8/zynqmp/spl.c | 7 +++++ arch/arm/include/asm/arch-zynqmp/hardware.h | 2 ++ 3 files changed, 57 insertions(+)