diff mbox

[U-Boot] ARM: dts: dra72-evm: fix broken ethernet

Message ID 20160831115219.23980-1-mugunthanvnm@ti.com
State Accepted
Commit 0068dd687d38e41eafa51135bc10e0f04a928601
Delegated to: Tom Rini
Headers show

Commit Message

Mugunthan V N Aug. 31, 2016, 11:52 a.m. UTC
With commit ceec08f50b6, phy is connected to slave 0, but
changing the phy node was missed, fix it by populating the
phy node to proper cpsw slave node.

Fixes: ceec08f50b6 ("ARM: dts: dra72-evm: Add mode-gpios entry for mac node")
Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
Cc: Vignesh R <vigneshr@ti.com>
---
 arch/arm/dts/dra72-evm.dts | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

Comments

Tom Rini Aug. 31, 2016, 12:04 p.m. UTC | #1
On Wed, Aug 31, 2016 at 05:22:19PM +0530, Mugunthan V N wrote:

> With commit ceec08f50b6, phy is connected to slave 0, but
> changing the phy node was missed, fix it by populating the
> phy node to proper cpsw slave node.
> 
> Fixes: ceec08f50b6 ("ARM: dts: dra72-evm: Add mode-gpios entry for mac node")
> Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
> Cc: Vignesh R <vigneshr@ti.com>

Tested-by: Tom Rini <trini@konsulko.com>

Thanks for tracking this one down, I've enabled the network tests on
mine now.
Tom Rini Sept. 6, 2016, 4:58 p.m. UTC | #2
On Wed, Aug 31, 2016 at 05:22:19PM +0530, Mugunthan V N wrote:

> With commit ceec08f50b6, phy is connected to slave 0, but
> changing the phy node was missed, fix it by populating the
> phy node to proper cpsw slave node.
> 
> Fixes: ceec08f50b6 ("ARM: dts: dra72-evm: Add mode-gpios entry for mac node")
> Signed-off-by: Mugunthan V N <mugunthanvnm@ti.com>
> Cc: Vignesh R <vigneshr@ti.com>
> Tested-by: Tom Rini <trini@konsulko.com>

Applied to u-boot/master, thanks!
diff mbox

Patch

diff --git a/arch/arm/dts/dra72-evm.dts b/arch/arm/dts/dra72-evm.dts
index 4ca37fa..e7c5db2 100644
--- a/arch/arm/dts/dra72-evm.dts
+++ b/arch/arm/dts/dra72-evm.dts
@@ -591,7 +591,7 @@ 
 	mode-gpios = <&pcf_gpio_21 4 GPIO_ACTIVE_HIGH>;
 };
 
-&cpsw_emac1 {
+&cpsw_emac0 {
 	phy_id = <&davinci_mdio>, <3>;
 	phy-mode = "rgmii";
 };