@@ -3,6 +3,7 @@
*/
#include <linux/module.h>
+#include <linux/gpio/machine.h>
#include <linux/init.h>
#include <linux/kernel.h>
#include <linux/tty.h>
@@ -354,12 +355,23 @@ static struct platform_device *devices[] __initdata = {
&simpad_i2c,
};
+/* Compact Flash */
+static struct gpiod_lookup_table simpad_cf_gpio_table = {
+ .dev_id = "sa11x0-pcmcia",
+ .table = {
+ GPIO_LOOKUP("gpio", GPIO_CF_IRQ, "cf-ready", GPIO_ACTIVE_HIGH),
+ GPIO_LOOKUP("gpio", GPIO_CF_CD, "cf-detect", GPIO_ACTIVE_HIGH),
+ { },
+ },
+};
static int __init simpad_init(void)
{
int ret;
+ gpiod_add_lookup_table(&simpad_cf_gpio_table);
+
spin_lock_init(&cs3_lock);
cs3_gpio.label = "simpad_cs3";
@@ -11,7 +11,6 @@
#include <mach/hardware.h>
#include <asm/mach-types.h>
-#include <asm/irq.h>
#include <mach/simpad.h>
#include "sa1100_generic.h"
@@ -20,12 +19,10 @@ static int simpad_pcmcia_hw_init(struct soc_pcmcia_socket *skt)
simpad_clear_cs3_bit(VCC_3V_EN|VCC_5V_EN|EN0|EN1);
- skt->stat[SOC_STAT_CD].gpio = GPIO_CF_CD;
- skt->stat[SOC_STAT_CD].name = "CF_CD";
- skt->stat[SOC_STAT_RDY].gpio = GPIO_CF_IRQ;
- skt->stat[SOC_STAT_RDY].name = "CF_RDY";
+ skt->stat[SOC_STAT_CD].name = "cf-detect";
+ skt->stat[SOC_STAT_RDY].name = "cf-ready";
- return 0;
+ return soc_pcmcia_request_gpiods(skt);
}
static void simpad_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt)
@@ -41,9 +38,6 @@ simpad_pcmcia_socket_state(struct soc_pcmcia_socket *skt,
{
long cs3reg = simpad_get_cs3_ro();
- /* the detect signal is inverted - fix that up here */
- state->detect = !state->detect;
-
state->bvd1 = 1; /* Might be cs3reg & PCMCIA_BVD1 */
state->bvd2 = 1; /* Might be cs3reg & PCMCIA_BVD2 */
Switch simpad's CF implementation to use the gpiod APIs. The inverted detection is handled using gpiolib's native inversion abilities. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> --- arch/arm/mach-sa1100/simpad.c | 12 ++++++++++++ drivers/pcmcia/sa1100_simpad.c | 12 +++--------- 2 files changed, 15 insertions(+), 9 deletions(-)