| Message ID | E1beJkO-0000mg-Lu@rmk-PC.armlinux.org.uk |
|---|---|
| State | New |
| Headers | show |
On Mon, Aug 29, 2016 at 12:24 PM, Russell King <rmk+kernel@armlinux.org.uk> wrote: > Switch to using the gpiod_* consumer API rather than the legacy API. > > Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> (...) > +int soc_pcmcia_request_gpiods(struct soc_pcmcia_socket *skt) > +{ > + int i; > + > + for (i = 0; i < ARRAY_SIZE(skt->stat); i++) { > + struct gpio_desc *desc; > + Here I inserted: /* Skip over unnamed GPIOs, assume unused */ if (!skt->stat[i].name) continue; to get it working again on h3600. > + desc = gpiod_get(skt->socket.dev.parent, > + skt->stat[i].name, GPIOD_IN); > + if (IS_ERR(desc)) { > + dev_err(skt->socket.dev.parent, > + "Failed to get GPIO for %s: %ld\n", > + skt->stat[i].name, PTR_ERR(desc)); > + __soc_pcmcia_hw_shutdown(skt, i); > + return PTR_ERR(desc); > + } It bugs out for me on the legacy h3600, since it only defines two of these pins not all of the ARRAY_SIZE(skt->stat) pins will succeed and we get an error message like this: sa11x0-pcmcia sa11x0-pcmcia: Failed to get GPIO for (null): -2 sa11x0-pcmcia: probe of sa11x0-pcmcia failed with error -2 With the patch above it goes away and the log is silent. The debugfs gpio file looks like this: cat gpio gpiochip0: GPIOs 0-27, gpio: gpio-0 ( |Power Button ) in hi gpio-10 ( |pcmcia1-detect ) in hi gpio-11 ( |pcmcia1-ready ) in hi gpio-17 ( |pcmcia0-detect ) in hi gpio-18 ( |Action button ) in hi gpio-21 ( |pcmcia0-ready ) in hi gpio-23 ( |dcd ) in hi gpio-25 ( |cts ) in lo gpio-26 ( |rts ) out lo gpiochip1: GPIOs 28-43, parent: platform/htc-egpio, htc-egpio: gpio-28 ( |Flash Vpp ) out lo gpio-29 ( |PCMCIA CARD RESET ) out lo gpio-30 ( |OPT RESET ) out lo gpio-32 ( |OPT NVRAM ON ) out lo gpio-33 ( |OPT ON ) out lo gpio-34 ( |LCD power ) out lo gpio-36 ( |LCD control ) out lo gpio-42 ( |LCD 5v ) out lo gpio-43 ( |LCD 9v/-6.5v ) out lo Which seems like before the patch series. I still suspect the PCMCIA is not really working but I have limited experience of the bus so I don't really know how to test it deeply or have my PCMCIA ethernet or harddrive probe properly. There are no regressions however, so with something like the above patch applied: Tested-by: Linus Walleij <linus.walleij@linaro.org> For the whole patch series on H3600. Yours, Linus Walleij -- To unsubscribe from this list: send the line "unsubscribe linux-gpio" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On Wed, Sep 14, 2016 at 01:29:04PM +0200, Linus Walleij wrote: > On Mon, Aug 29, 2016 at 12:24 PM, Russell King > <rmk+kernel@armlinux.org.uk> wrote: > > > Switch to using the gpiod_* consumer API rather than the legacy API. > > > > Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> > (...) > > > +int soc_pcmcia_request_gpiods(struct soc_pcmcia_socket *skt) > > +{ > > + int i; > > + > > + for (i = 0; i < ARRAY_SIZE(skt->stat); i++) { > > + struct gpio_desc *desc; > > + > > Here I inserted: > > /* Skip over unnamed GPIOs, assume unused */ > if (!skt->stat[i].name) > continue; > > to get it working again on h3600. Thanks, I'll add that. > > + desc = gpiod_get(skt->socket.dev.parent, > > + skt->stat[i].name, GPIOD_IN); > > + if (IS_ERR(desc)) { > > + dev_err(skt->socket.dev.parent, > > + "Failed to get GPIO for %s: %ld\n", > > + skt->stat[i].name, PTR_ERR(desc)); > > + __soc_pcmcia_hw_shutdown(skt, i); > > + return PTR_ERR(desc); > > + } > > > It bugs out for me on the legacy h3600, since it only defines > two of these pins not all of the ARRAY_SIZE(skt->stat) pins > will succeed and we get an error message like this: > > sa11x0-pcmcia sa11x0-pcmcia: Failed to get GPIO for (null): -2 > sa11x0-pcmcia: probe of sa11x0-pcmcia failed with error -2 > > With the patch above it goes away and the log is silent. > The debugfs gpio file looks like this: > > cat gpio > gpiochip0: GPIOs 0-27, gpio: > gpio-0 ( |Power Button ) in hi > gpio-10 ( |pcmcia1-detect ) in hi > gpio-11 ( |pcmcia1-ready ) in hi > gpio-17 ( |pcmcia0-detect ) in hi > gpio-18 ( |Action button ) in hi > gpio-21 ( |pcmcia0-ready ) in hi > gpio-23 ( |dcd ) in hi > gpio-25 ( |cts ) in lo > gpio-26 ( |rts ) out lo > > gpiochip1: GPIOs 28-43, parent: platform/htc-egpio, htc-egpio: > gpio-28 ( |Flash Vpp ) out lo > gpio-29 ( |PCMCIA CARD RESET ) out lo > gpio-30 ( |OPT RESET ) out lo > gpio-32 ( |OPT NVRAM ON ) out lo > gpio-33 ( |OPT ON ) out lo > gpio-34 ( |LCD power ) out lo > gpio-36 ( |LCD control ) out lo > gpio-42 ( |LCD 5v ) out lo > gpio-43 ( |LCD 9v/-6.5v ) out lo > > Which seems like before the patch series. Yay. > I still suspect the PCMCIA is not really working but I have > limited experience of the bus so I don't really know how > to test it deeply or have my PCMCIA ethernet or harddrive > probe properly. Yes, to me the H3600 code looks really really really weird - the way H3XXX_EGPIO_CARD_RESET is "shared" (badly) between both sockets is certainly racy. I've no idea what the semantics there are supposed to be - I suspect that H3600 PCMCIA hasn't worked for a very long time, or if it has, it's probably not been reliable. > There are no regressions however, so with something like > the above patch applied: > Tested-by: Linus Walleij <linus.walleij@linaro.org> > > For the whole patch series on H3600. Thanks!
diff --git a/drivers/pcmcia/soc_common.c b/drivers/pcmcia/soc_common.c index d5ca760c4eb2..5d167512e96e 100644 --- a/drivers/pcmcia/soc_common.c +++ b/drivers/pcmcia/soc_common.c @@ -33,6 +33,7 @@ #include <linux/cpufreq.h> #include <linux/gpio.h> +#include <linux/gpio/consumer.h> #include <linux/init.h> #include <linux/interrupt.h> #include <linux/io.h> @@ -114,8 +115,8 @@ static void __soc_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt, for (i = 0; i < nr; i++) { if (skt->stat[i].irq) free_irq(skt->stat[i].irq, skt); - if (gpio_is_valid(skt->stat[i].gpio)) - gpio_free(skt->stat[i].gpio); + if (skt->stat[i].desc) + gpiod_put(skt->stat[i].desc); } if (skt->ops->hw_shutdown) @@ -129,6 +130,30 @@ static void soc_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt) __soc_pcmcia_hw_shutdown(skt, ARRAY_SIZE(skt->stat)); } +int soc_pcmcia_request_gpiods(struct soc_pcmcia_socket *skt) +{ + int i; + + for (i = 0; i < ARRAY_SIZE(skt->stat); i++) { + struct gpio_desc *desc; + + desc = gpiod_get(skt->socket.dev.parent, + skt->stat[i].name, GPIOD_IN); + if (IS_ERR(desc)) { + dev_err(skt->socket.dev.parent, + "Failed to get GPIO for %s: %ld\n", + skt->stat[i].name, PTR_ERR(desc)); + __soc_pcmcia_hw_shutdown(skt, i); + return PTR_ERR(desc); + } + + skt->stat[i].desc = desc; + } + + return 0; +} +EXPORT_SYMBOL_GPL(soc_pcmcia_request_gpiods); + static int soc_pcmcia_hw_init(struct soc_pcmcia_socket *skt) { int ret = 0, i; @@ -143,8 +168,6 @@ static int soc_pcmcia_hw_init(struct soc_pcmcia_socket *skt) for (i = 0; i < ARRAY_SIZE(skt->stat); i++) { if (gpio_is_valid(skt->stat[i].gpio)) { - int irq; - ret = gpio_request_one(skt->stat[i].gpio, GPIOF_IN, skt->stat[i].name); if (ret) { @@ -152,7 +175,11 @@ static int soc_pcmcia_hw_init(struct soc_pcmcia_socket *skt) return ret; } - irq = gpio_to_irq(skt->stat[i].gpio); + skt->stat[i].desc = gpio_to_desc(skt->stat[i].gpio); + } + + if (skt->stat[i].desc) { + int irq = gpiod_to_irq(skt->stat[i].desc); if (i == SOC_STAT_RDY) skt->socket.pci_irq = irq; @@ -166,8 +193,8 @@ static int soc_pcmcia_hw_init(struct soc_pcmcia_socket *skt) IRQF_TRIGGER_NONE, skt->stat[i].name, skt); if (ret) { - if (gpio_is_valid(skt->stat[i].gpio)) - gpio_free(skt->stat[i].gpio); + if (skt->stat[i].desc) + gpiod_put(skt->stat[i].desc); __soc_pcmcia_hw_shutdown(skt, i); return ret; } @@ -209,16 +236,16 @@ static unsigned int soc_common_pcmcia_skt_state(struct soc_pcmcia_socket *skt) state.bvd2 = 1; /* CD is active low by default */ - if (gpio_is_valid(skt->stat[SOC_STAT_CD].gpio)) - state.detect = !gpio_get_value(skt->stat[SOC_STAT_CD].gpio); + if (skt->stat[SOC_STAT_CD].desc) + state.detect = !gpiod_get_raw_value(skt->stat[SOC_STAT_CD].desc); /* RDY and BVD are active high by default */ - if (gpio_is_valid(skt->stat[SOC_STAT_RDY].gpio)) - state.ready = !!gpio_get_value(skt->stat[SOC_STAT_RDY].gpio); - if (gpio_is_valid(skt->stat[SOC_STAT_BVD1].gpio)) - state.bvd1 = !!gpio_get_value(skt->stat[SOC_STAT_BVD1].gpio); - if (gpio_is_valid(skt->stat[SOC_STAT_BVD2].gpio)) - state.bvd2 = !!gpio_get_value(skt->stat[SOC_STAT_BVD2].gpio); + if (skt->stat[SOC_STAT_RDY].desc) + state.ready = !!gpiod_get_value(skt->stat[SOC_STAT_RDY].desc); + if (skt->stat[SOC_STAT_BVD1].desc) + state.bvd1 = !!gpiod_get_value(skt->stat[SOC_STAT_BVD1].desc); + if (skt->stat[SOC_STAT_BVD2].desc) + state.bvd2 = !!gpiod_get_value(skt->stat[SOC_STAT_BVD2].desc); skt->ops->socket_state(skt, &state); diff --git a/drivers/pcmcia/soc_common.h b/drivers/pcmcia/soc_common.h index 94762a54d731..ee40db16dc40 100644 --- a/drivers/pcmcia/soc_common.h +++ b/drivers/pcmcia/soc_common.h @@ -17,6 +17,7 @@ struct device; +struct gpio_desc; struct pcmcia_low_level; /* @@ -52,6 +53,7 @@ struct soc_pcmcia_socket { struct { int gpio; + struct gpio_desc *desc; unsigned int irq; const char *name; } stat[4]; @@ -136,6 +138,7 @@ void soc_pcmcia_init_one(struct soc_pcmcia_socket *skt, struct pcmcia_low_level *ops, struct device *dev); void soc_pcmcia_remove_one(struct soc_pcmcia_socket *skt); int soc_pcmcia_add_one(struct soc_pcmcia_socket *skt); +int soc_pcmcia_request_gpiods(struct soc_pcmcia_socket *skt); #ifdef CONFIG_PCMCIA_DEBUG
Switch to using the gpiod_* consumer API rather than the legacy API. Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk> --- drivers/pcmcia/soc_common.c | 57 +++++++++++++++++++++++++++++++++------------ drivers/pcmcia/soc_common.h | 3 +++ 2 files changed, 45 insertions(+), 15 deletions(-)