diff mbox

[net-next] net: ethtool: add support for 1000BaseX and missing 10G link modes

Message ID 1472199950-18464-1-git-send-email-vidya@cumulusnetworks.com
State Accepted, archived
Delegated to: David Miller
Headers show

Commit Message

vidya@cumulusnetworks.com Aug. 26, 2016, 8:25 a.m. UTC 
From: Vidya Sagar Ravipati <vidya@cumulusnetworks.com>

This patch enhances ethtool link mode bitmap to include
missing interface modes for 1G/10G speeds

Changes:
1000baseX is the mode introduced to cover all 1G Fiber cases.
All modes under 1000BaseX i.e. 1000BASE-SX, 1000BASE-LX, 1000BASE-LX10
and 1000BASE-BX10 are not explicitly defined at this moment.
10G CR,SR,LR and ER link modes are included for 10G speed..

Issue:
ethtool on  1G/10G SFP port reports Base-T
as this port supports 1000baseX,10G CR, SR and LR modes.

root@tor-02$ ethtool swp1
Settings for swp1:
        Supported ports: [ FIBRE ]
        Supported link modes:   1000baseT/Full
                                10000baseT/Full
        Supported pause frame use: Symmetric Receive-only
        Supports auto-negotiation: Yes
        Advertised link modes:  1000baseT/Full
        Advertised pause frame use: No
        Advertised auto-negotiation: No
        Speed: 10000Mb/s
        Duplex: Full
        Port: FIBRE
        PHYAD: 0
        Transceiver: external
        Auto-negotiation: off
        Current message level: 0x00000000 (0)

        Link detected: yes

After fix:
root@tor-02$ ethtool swp1
Settings for swp1:
        Supported ports: [ FIBRE ]
        Supported link modes:   1000baseX/Full
                                10000baseCR/Full
                                10000baseSR/Full
                                10000baseLR/Full
                                10000baseER/Full
        Supported pause frame use: Symmetric Receive-only
        Supports auto-negotiation: Yes
        Advertised link modes:  1000baseT/Full
        Advertised pause frame use: No
        Advertised auto-negotiation: No
        Speed: 10000Mb/s
        Duplex: Full
        Port: FIBRE
        PHYAD: 0
        Transceiver: external
        Auto-negotiation: off
        Current message level: 0x00000000 (0)
        Link detected: yes

Signed-off-by: Vidya Sagar Ravipati <vidya@cumulusnetworks.com>
---
 include/uapi/linux/ethtool.h | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

Comments

David Miller Aug. 29, 2016, 4:28 a.m. UTC | #1 
From: Vidya Sagar Ravipati <vidya@cumulusnetworks.com>
Date: Fri, 26 Aug 2016 01:25:50 -0700

> From: Vidya Sagar Ravipati <vidya@cumulusnetworks.com>
> 
> This patch enhances ethtool link mode bitmap to include
> missing interface modes for 1G/10G speeds
 ...
> Signed-off-by: Vidya Sagar Ravipati <vidya@cumulusnetworks.com>

Applied.
diff mbox

Patch

diff --git a/include/uapi/linux/ethtool.h b/include/uapi/linux/ethtool.h
index b8f38e8..099a420 100644
--- a/include/uapi/linux/ethtool.h
+++ b/include/uapi/linux/ethtool.h
@@ -1362,7 +1362,14 @@  enum ethtool_link_mode_bit_indices {
 	ETHTOOL_LINK_MODE_100000baseSR4_Full_BIT	= 37,
 	ETHTOOL_LINK_MODE_100000baseCR4_Full_BIT	= 38,
 	ETHTOOL_LINK_MODE_100000baseLR4_ER4_Full_BIT	= 39,
-	ETHTOOL_LINK_MODE_50000baseSR2_Full_BIT         = 40,
+	ETHTOOL_LINK_MODE_50000baseSR2_Full_BIT		= 40,
+	ETHTOOL_LINK_MODE_1000baseX_Full_BIT	= 41,
+	ETHTOOL_LINK_MODE_10000baseCR_Full_BIT	= 42,
+	ETHTOOL_LINK_MODE_10000baseSR_Full_BIT	= 43,
+	ETHTOOL_LINK_MODE_10000baseLR_Full_BIT	= 44,
+	ETHTOOL_LINK_MODE_10000baseLRM_Full_BIT	= 45,
+	ETHTOOL_LINK_MODE_10000baseER_Full_BIT	= 46,
+
 
 	/* Last allowed bit for __ETHTOOL_LINK_MODE_LEGACY_MASK is bit
 	 * 31. Please do NOT define any SUPPORTED_* or ADVERTISED_*
@@ -1371,7 +1378,7 @@  enum ethtool_link_mode_bit_indices {
 	 */
 
 	__ETHTOOL_LINK_MODE_LAST
-	  = ETHTOOL_LINK_MODE_50000baseSR2_Full_BIT,
+	  = ETHTOOL_LINK_MODE_10000baseER_Full_BIT,
 };
 
 #define __ETHTOOL_LINK_MODE_LEGACY_MASK(base_name)	\