| Message ID | 1471274620-20754-2-git-send-email-lorenzo.pieralisi@arm.com |
|---|---|
| State | Not Applicable |
| Headers | show |
Hi Rafael, On Mon, Aug 15, 2016 at 04:23:26PM +0100, Lorenzo Pieralisi wrote: > On systems booting with a device tree, every struct device is > associated with a struct device_node, that represents its DT > representation. The device node can be used in generic kernel > contexts (eg IRQ translation, IOMMU streamid mapping), to > retrieve the properties associated with the device and carry > out kernel operation accordingly. Owing to the 1:1 relationship > between the device and its device_node, the device_node can also > be used as a look-up token for the device (eg looking up a device > through its device_node), to retrieve the device in kernel paths > where the device_node is available. > > On systems booting with ACPI, the same abstraction provided by > the device_node is required to provide look-up functionality. > > Therefore, mirroring the approach implemented in the IRQ domain > kernel layer, this patch adds an additional fwnode type FWNODE_IOMMU. > > This patch also implements a glue kernel layer that allows to > allocate/free FWNODE_IOMMU fwnode_handle structures and associate > them with IOMMU devices. > > Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> > Cc: Joerg Roedel <joro@8bytes.org> > Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> > --- > include/linux/fwnode.h | 1 + > include/linux/iommu.h | 25 +++++++++++++++++++++++++ > 2 files changed, 26 insertions(+) > > diff --git a/include/linux/fwnode.h b/include/linux/fwnode.h > index 8516717..6e10050 100644 > --- a/include/linux/fwnode.h > +++ b/include/linux/fwnode.h > @@ -19,6 +19,7 @@ enum fwnode_type { > FWNODE_ACPI_DATA, > FWNODE_PDATA, > FWNODE_IRQCHIP, > + FWNODE_IOMMU, > }; Are you ok with this fwnode usage ? It is quite key to the rest of this series and I would need to know in order to make progress on it please. Platform devices created out of IORT tables are not ACPI devices (I could create fake ones as we do for FADT power button, I do not see any particular reason to prefer that approach over this one) and in order to identify the device through a fwnode_handle (that, as for IRQCHIP is nothing but a token used for look-up) that's what I came up with. Any feedback on the rest of the series is very welcome and needed too, thanks. Lorenzo > struct fwnode_handle { > diff --git a/include/linux/iommu.h b/include/linux/iommu.h > index a35fb8b..6f703cb 100644 > --- a/include/linux/iommu.h > +++ b/include/linux/iommu.h > @@ -38,6 +38,7 @@ struct bus_type; > struct device; > struct iommu_domain; > struct notifier_block; > +struct fwnode_handle; > > /* iommu fault flags */ > #define IOMMU_FAULT_READ 0x0 > @@ -543,4 +544,28 @@ static inline void iommu_device_unlink(struct device *dev, struct device *link) > > #endif /* CONFIG_IOMMU_API */ > > +/* IOMMU fwnode handling */ > +static inline bool is_fwnode_iommu(struct fwnode_handle *fwnode) > +{ > + return fwnode && fwnode->type == FWNODE_IOMMU; > +} > + > +static inline struct fwnode_handle *iommu_alloc_fwnode(void) > +{ > + struct fwnode_handle *fwnode; > + > + fwnode = kzalloc(sizeof(struct fwnode_handle), GFP_ATOMIC); > + fwnode->type = FWNODE_IOMMU; > + > + return fwnode; > +} > + > +static inline void iommu_free_fwnode(struct fwnode_handle *fwnode) > +{ > + if (WARN_ON(!is_fwnode_iommu(fwnode))) > + return; > + > + kfree(fwnode); > +} > + > #endif /* __LINUX_IOMMU_H */ > -- > 2.6.4 > -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
On 2016/8/15 23:23, Lorenzo Pieralisi wrote: > On systems booting with a device tree, every struct device is > associated with a struct device_node, that represents its DT > representation. The device node can be used in generic kernel > contexts (eg IRQ translation, IOMMU streamid mapping), to > retrieve the properties associated with the device and carry > out kernel operation accordingly. Owing to the 1:1 relationship > between the device and its device_node, the device_node can also > be used as a look-up token for the device (eg looking up a device > through its device_node), to retrieve the device in kernel paths > where the device_node is available. > > On systems booting with ACPI, the same abstraction provided by > the device_node is required to provide look-up functionality. > > Therefore, mirroring the approach implemented in the IRQ domain > kernel layer, this patch adds an additional fwnode type FWNODE_IOMMU. > > This patch also implements a glue kernel layer that allows to > allocate/free FWNODE_IOMMU fwnode_handle structures and associate > them with IOMMU devices. > > Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> > Cc: Joerg Roedel <joro@8bytes.org> > Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> > --- > include/linux/fwnode.h | 1 + > include/linux/iommu.h | 25 +++++++++++++++++++++++++ > 2 files changed, 26 insertions(+) > > diff --git a/include/linux/fwnode.h b/include/linux/fwnode.h > index 8516717..6e10050 100644 > --- a/include/linux/fwnode.h > +++ b/include/linux/fwnode.h > @@ -19,6 +19,7 @@ enum fwnode_type { > FWNODE_ACPI_DATA, > FWNODE_PDATA, > FWNODE_IRQCHIP, > + FWNODE_IOMMU, > }; > > struct fwnode_handle { > diff --git a/include/linux/iommu.h b/include/linux/iommu.h > index a35fb8b..6f703cb 100644 > --- a/include/linux/iommu.h > +++ b/include/linux/iommu.h > @@ -38,6 +38,7 @@ struct bus_type; > struct device; > struct iommu_domain; > struct notifier_block; > +struct fwnode_handle; > > /* iommu fault flags */ > #define IOMMU_FAULT_READ 0x0 > @@ -543,4 +544,28 @@ static inline void iommu_device_unlink(struct device *dev, struct device *link) > > #endif /* CONFIG_IOMMU_API */ > > +/* IOMMU fwnode handling */ > +static inline bool is_fwnode_iommu(struct fwnode_handle *fwnode) > +{ > + return fwnode && fwnode->type == FWNODE_IOMMU; > +} > + > +static inline struct fwnode_handle *iommu_alloc_fwnode(void) > +{ > + struct fwnode_handle *fwnode; > + > + fwnode = kzalloc(sizeof(struct fwnode_handle), GFP_ATOMIC); > + fwnode->type = FWNODE_IOMMU; > + > + return fwnode; > +} > + > +static inline void iommu_free_fwnode(struct fwnode_handle *fwnode) > +{ > + if (WARN_ON(!is_fwnode_iommu(fwnode))) > + return; > + > + kfree(fwnode); > +} > + > #endif /* __LINUX_IOMMU_H */ > This is the similar mechanism as FWNODE_IRQCHIP as mentioned in change log, Reviewed-by: Hanjun Guo <hanjun.guo@linaro.org> Thanks Hanjun -- To unsubscribe from this list: send the line "unsubscribe linux-pci" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
diff --git a/include/linux/fwnode.h b/include/linux/fwnode.h index 8516717..6e10050 100644 --- a/include/linux/fwnode.h +++ b/include/linux/fwnode.h @@ -19,6 +19,7 @@ enum fwnode_type { FWNODE_ACPI_DATA, FWNODE_PDATA, FWNODE_IRQCHIP, + FWNODE_IOMMU, }; struct fwnode_handle { diff --git a/include/linux/iommu.h b/include/linux/iommu.h index a35fb8b..6f703cb 100644 --- a/include/linux/iommu.h +++ b/include/linux/iommu.h @@ -38,6 +38,7 @@ struct bus_type; struct device; struct iommu_domain; struct notifier_block; +struct fwnode_handle; /* iommu fault flags */ #define IOMMU_FAULT_READ 0x0 @@ -543,4 +544,28 @@ static inline void iommu_device_unlink(struct device *dev, struct device *link) #endif /* CONFIG_IOMMU_API */ +/* IOMMU fwnode handling */ +static inline bool is_fwnode_iommu(struct fwnode_handle *fwnode) +{ + return fwnode && fwnode->type == FWNODE_IOMMU; +} + +static inline struct fwnode_handle *iommu_alloc_fwnode(void) +{ + struct fwnode_handle *fwnode; + + fwnode = kzalloc(sizeof(struct fwnode_handle), GFP_ATOMIC); + fwnode->type = FWNODE_IOMMU; + + return fwnode; +} + +static inline void iommu_free_fwnode(struct fwnode_handle *fwnode) +{ + if (WARN_ON(!is_fwnode_iommu(fwnode))) + return; + + kfree(fwnode); +} + #endif /* __LINUX_IOMMU_H */
On systems booting with a device tree, every struct device is associated with a struct device_node, that represents its DT representation. The device node can be used in generic kernel contexts (eg IRQ translation, IOMMU streamid mapping), to retrieve the properties associated with the device and carry out kernel operation accordingly. Owing to the 1:1 relationship between the device and its device_node, the device_node can also be used as a look-up token for the device (eg looking up a device through its device_node), to retrieve the device in kernel paths where the device_node is available. On systems booting with ACPI, the same abstraction provided by the device_node is required to provide look-up functionality. Therefore, mirroring the approach implemented in the IRQ domain kernel layer, this patch adds an additional fwnode type FWNODE_IOMMU. This patch also implements a glue kernel layer that allows to allocate/free FWNODE_IOMMU fwnode_handle structures and associate them with IOMMU devices. Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> --- include/linux/fwnode.h | 1 + include/linux/iommu.h | 25 +++++++++++++++++++++++++ 2 files changed, 26 insertions(+)