diff mbox

[U-Boot,v2,10/22] sf: Add JEDEC_MFR

Message ID 1470773317-14314-1-git-send-email-jteki@openedev.com
State Superseded
Delegated to: Jagannadha Sutradharudu Teki
Headers show

Commit Message

Jagan Teki Aug. 9, 2016, 8:08 p.m. UTC 
Instead using idcode[0] for detecting manufacture id
add JEDEC_MFR macro for code simplicity and undesirability.

Cc: Simon Glass <sjg@chromium.org>
Cc: Bin Meng <bmeng.cn@gmail.com>
Cc: York Sun <york.sun@nxp.com>
Cc: Vignesh R <vigneshr@ti.com>
Cc: Mugunthan V N <mugunthanvnm@ti.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Siva Durga Prasad Paladugu <sivadur@xilinx.com>
Signed-off-by: Jagan Teki <jteki@openedev.com>
---
 drivers/mtd/spi/sf_internal.h |  1 +
 drivers/mtd/spi/spi_flash.c   | 30 +++++++++++++++++-------------
 2 files changed, 18 insertions(+), 13 deletions(-)
diff mbox

Patch

diff --git a/drivers/mtd/spi/sf_internal.h b/drivers/mtd/spi/sf_internal.h
index 4e9ae34..26ada3b 100644
--- a/drivers/mtd/spi/sf_internal.h
+++ b/drivers/mtd/spi/sf_internal.h
@@ -104,6 +104,7 @@  int sst_write_bp(struct spi_flash *flash, u32 offset, size_t len,
 #define CMD_SPANSION_WRAR	0x71 /* Write any device register */
 #endif
 
+#define JEDEC_MFR(info)		((info)->id[0])
 #define JEDEC_ID(info)		(((info)->id[1]) << 8 | ((info)->id[2]))
 #define JEDEC_EXT(info) 	(((info)->id[3]) << 8 | ((info)->id[4]))
 
diff --git a/drivers/mtd/spi/spi_flash.c b/drivers/mtd/spi/spi_flash.c
index 80c96f9..7bb8775 100644
--- a/drivers/mtd/spi/spi_flash.c
+++ b/drivers/mtd/spi/spi_flash.c
@@ -165,7 +165,8 @@  bar_end:
 	return flash->bank_curr;
 }
 
-static int spi_flash_read_bar(struct spi_flash *flash, u8 idcode0)
+static int spi_flash_read_bar(struct spi_flash *flash,
+			      const struct spi_flash_info *info)
 {
 	u8 curr_bank = 0;
 	int ret;
@@ -173,7 +174,7 @@  static int spi_flash_read_bar(struct spi_flash *flash, u8 idcode0)
 	if (flash->size <= SPI_FLASH_16MB_BOUN)
 		goto bar_end;
 
-	switch (idcode0) {
+	switch (JEDEC_MFR(info)) {
 	case SPI_FLASH_CFI_MFR_SPANSION:
 		flash->bank_read_cmd = CMD_BANKADDR_BRRD;
 		flash->bank_write_cmd = CMD_BANKADDR_BRWR;
@@ -949,9 +950,10 @@  static const struct spi_flash_info *spi_flash_read_id(struct spi_flash *flash)
 	return ERR_PTR(-ENODEV);
 }
 
-static int set_quad_mode(struct spi_flash *flash, u8 idcode0)
+static int set_quad_mode(struct spi_flash *flash,
+			 const struct spi_flash_info *info)
 {
-	switch (idcode0) {
+	switch (JEDEC_MFR(info)) {
 #ifdef CONFIG_SPI_FLASH_MACRONIX
 	case SPI_FLASH_CFI_MFR_MACRONIX:
 		return macronix_quad_enable(flash);
@@ -966,7 +968,8 @@  static int set_quad_mode(struct spi_flash *flash, u8 idcode0)
 		return micron_quad_enable(flash);
 #endif
 	default:
-		printf("SF: Need set QEB func for %02x flash\n", idcode0);
+		printf("SF: Need set QEB func for %02x flash\n",
+		       JEDEC_MFR(info));
 		return -1;
 	}
 }
@@ -1085,9 +1088,9 @@  int spi_flash_scan(struct spi_flash *flash)
 	}
 #endif
 	/* Flash powers up read-only, so clear BP# bits */
-	if (idcode[0] == SPI_FLASH_CFI_MFR_ATMEL ||
-	    idcode[0] == SPI_FLASH_CFI_MFR_MACRONIX ||
-	    idcode[0] == SPI_FLASH_CFI_MFR_SST)
+	if (JEDEC_MFR(info) == SPI_FLASH_CFI_MFR_ATMEL ||
+	    JEDEC_MFR(info) == SPI_FLASH_CFI_MFR_MACRONIX ||
+	    JEDEC_MFR(info) == SPI_FLASH_CFI_MFR_SST)
 		write_sr(flash, 0);
 
 	/* Assign spi data */
@@ -1115,7 +1118,7 @@  int spi_flash_scan(struct spi_flash *flash)
 #endif
 
 	/* lock hooks are flash specific - assign them based on idcode0 */
-	switch (idcode[0]) {
+	switch (JEDEC_MFR(info)) {
 #if defined(CONFIG_SPI_FLASH_STMICRO) || defined(CONFIG_SPI_FLASH_SST)
 	case SPI_FLASH_CFI_MFR_STMICRO:
 	case SPI_FLASH_CFI_MFR_SST:
@@ -1125,7 +1128,7 @@  int spi_flash_scan(struct spi_flash *flash)
 #endif
 		break;
 	default:
-		debug("SF: Lock ops not supported for %02x flash\n", idcode[0]);
+		debug("SF: Lock ops not supported for %02x flash\n", JEDEC_MFR(info));
 	}
 
 	/* Compute the flash size */
@@ -1185,9 +1188,10 @@  int spi_flash_scan(struct spi_flash *flash)
 	if ((flash->read_cmd == CMD_READ_QUAD_OUTPUT_FAST) ||
 	    (flash->read_cmd == CMD_READ_QUAD_IO_FAST) ||
 	    (flash->write_cmd == CMD_QUAD_PAGE_PROGRAM)) {
-		ret = set_quad_mode(flash, idcode[0]);
+		ret = set_quad_mode(flash, info);
 		if (ret) {
-			debug("SF: Fail to set QEB for %02x\n", idcode[0]);
+			debug("SF: Fail to set QEB for %02x\n",
+			      JEDEC_MFR(info));
 			return -EINVAL;
 		}
 	}
@@ -1218,7 +1222,7 @@  int spi_flash_scan(struct spi_flash *flash)
 
 	/* Configure the BAR - discover bank cmds and read current bank */
 #ifdef CONFIG_SPI_FLASH_BAR
-	ret = spi_flash_read_bar(flash, idcode[0]);
+	ret = spi_flash_read_bar(flash, info);
 	if (ret < 0)
 		return ret;
 #endif