Message ID | 201009251157.07197.linux@rainbow-software.org |
---|---|
State | Accepted, archived |
Delegated to: | David Miller |
Headers | show |
On 09/25/2010 05:57 AM, Ondrej Zary wrote: > At least my 21041 cards come out of suspend with bus mastering disabled so > they did not work after resume(no data transferred). > After adding pci_set_master(), the driver oopsed immediately on resume - > because de_clean_rings() is called on suspend but de_init_rings() call > was missing in resume. > > Also disable link (reset SIA) before sleep (de4x5 does this too). > > Signed-off-by: Ondrej Zary<linux@rainbow-software.org> > > --- linux-2.6.36-rc3-/drivers/net/tulip/de2104x.c 2010-09-25 11:27:26.000000000 +0200 > +++ linux-2.6.36-rc3/drivers/net/tulip/de2104x.c 2010-09-25 11:29:22.000000000 +0200 > @@ -1231,6 +1231,7 @@ static void de_adapter_sleep (struct de_ > if (de->de21040) > return; > > + dw32(CSR13, 0); /* Reset phy */ > pci_read_config_dword(de->pdev, PCIPM,&pmctl); > pmctl |= PM_Sleep; > pci_write_config_dword(de->pdev, PCIPM, pmctl); > @@ -2166,6 +2167,8 @@ static int de_resume (struct pci_dev *pd > dev_err(&dev->dev, "pci_enable_device failed in resume\n"); > goto out; > } > + pci_set_master(pdev); > + de_init_rings(de); > de_init_hw(de); > out_attach: > netif_device_attach(dev); Acked-by: Jeff Garzik <jgarzik@redhat.com> IMO suspend/resume could use another look; if netif_running is false (interface is down), de2104x does not put the PCI device to sleep, which seems strange. I also wonder if rtnl_lock() couldn't be eliminated, as other net drivers don't need it in suspend/resume. -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
From: Jeff Garzik <jgarzik@pobox.com> Date: Sat, 25 Sep 2010 13:16:56 -0400 > On 09/25/2010 05:57 AM, Ondrej Zary wrote: >> At least my 21041 cards come out of suspend with bus mastering >> disabled so >> they did not work after resume(no data transferred). >> After adding pci_set_master(), the driver oopsed immediately on resume >> - >> because de_clean_rings() is called on suspend but de_init_rings() call >> was missing in resume. >> >> Also disable link (reset SIA) before sleep (de4x5 does this too). >> >> Signed-off-by: Ondrej Zary<linux@rainbow-software.org> ... > Acked-by: Jeff Garzik <jgarzik@redhat.com> I'll apply this, thanks guys. > IMO suspend/resume could use another look; if netif_running is false > (interface is down), de2104x does not put the PCI device to sleep, > which seems strange. TG3 does the same. The reason is that until we bringing the device up (and thus netif_running becomes true) the device is left in the most appropriate powered down state. At least that is my understanding. What is appropriate for any driver in this situation depends upon how it programs the device before ->open() occurs. > I also wonder if rtnl_lock() couldn't be eliminated, as other net > drivers don't need it in suspend/resume. I suspect the RTNL stuff here can be safely removed. I think it's using it to guard the netif_running() check but that isn't necessary. -- To unsubscribe from this list: send the line "unsubscribe netdev" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
--- linux-2.6.36-rc3-/drivers/net/tulip/de2104x.c 2010-09-25 11:27:26.000000000 +0200 +++ linux-2.6.36-rc3/drivers/net/tulip/de2104x.c 2010-09-25 11:29:22.000000000 +0200 @@ -1231,6 +1231,7 @@ static void de_adapter_sleep (struct de_ if (de->de21040) return; + dw32(CSR13, 0); /* Reset phy */ pci_read_config_dword(de->pdev, PCIPM, &pmctl); pmctl |= PM_Sleep; pci_write_config_dword(de->pdev, PCIPM, pmctl); @@ -2166,6 +2167,8 @@ static int de_resume (struct pci_dev *pd dev_err(&dev->dev, "pci_enable_device failed in resume\n"); goto out; } + pci_set_master(pdev); + de_init_rings(de); de_init_hw(de); out_attach: netif_device_attach(dev);
At least my 21041 cards come out of suspend with bus mastering disabled so they did not work after resume(no data transferred). After adding pci_set_master(), the driver oopsed immediately on resume - because de_clean_rings() is called on suspend but de_init_rings() call was missing in resume. Also disable link (reset SIA) before sleep (de4x5 does this too). Signed-off-by: Ondrej Zary <linux@rainbow-software.org>